Siselectron SCI1132 Bedienungsanleitung
1
Table of Contents
1. Overview................................................................................................................................2
1.1 Features......................................................................................................................2
1.2 Package Contents .......................................................................................................3
1.3 Dimensions..................................................................................................................4
1.4Connectors..................................................................................................................5
2. Camera Cabling.....................................................................................................................6
2.1 Power Connection .......................................................................................................6
2.2 Ethernet Cable Connection..........................................................................................6
2.4 Alarm I/O Connection ..................................................................................................6
2.5 RS-485 Connection .....................................................................................................7
3. System Requirements ..........................................................................................................8
4. Access Camera .....................................................................................................................9
5. Setup Video Resolution......................................................................................................12
6. Configuration File Export / Import .....................................................................................13
7. Tech Support Information ..................................................................................................14
7.1 Delete the Existing Viewer.........................................................................................14
7.2 Setup Internet Security..............................................................................................15
Appendix: Technical Specifications
2
1. Overview
Equipped with industrial-grade streaming compression technology, the Superior
HDR Zoom AF Box IP Camera supports up to 4M real-time video and quad
streams codec, and offers supreme image quality while keeping efficient and
valuable network bandwidth for storage management.
Possessing line-by-line HDR technology, the camera provides premium
performance under extreme low light contrast scenario or fluctuated lighting
environments.
Furthermore, with smart event function, alarm / motion can be categorized by
event types, which makes event management much easier. The camera offers
strengthened support for surveillance application that demands consistent
precision zoom control while high resolution and superior video quality are
requisite.
1.1 Features
Multiple Progressive Scan CMOS Sensor Support 4M Resolution
3x Optical Zoom with Auto Focus
HDR (Multiple Shutter Exposure) and WDR (Digital Enhancement)
Low Power Consumption on Encoding
Quad Codec Support- H.264 Baseline / Main / High Profile + MJPEG
Quad Streams Support
Smart Event Function-
Motion Detection / Network Failure Detection / Tampering Alarm / Periodical
Event / Manual Trigger / Audio Detection
Text Overlay and Privacy Masks
Multi-language Support
3D Motion Compensated Noise Reduction (MCTF)
BNC Analog Output
64GB micro SDXC SD Card Support
ONVIF Profile S Support
RS-485 Support
3
1.2 Package Contents
Please check the package containing the following items listed below.
Superior HDR
Zoom AF Box IP Camera
Power Switch Connector
CD
(bundled software and documentation)
Quick Guide
4
1.3 Dimensions
The dimensions of the camera are shown below.
5
1.4 Connectors
The diagram below shows the various connectors of the camera. Definition for
each connector is given as follows.
No.
Connector
Definition
1
BNC
For analogue video output
2
Network LEDs
For network connection and activity indication
3
Audio I/O
Two-way audio transmission
4
microSD Card Slot
Insert the microSD card into the card slot to store videos
and snapshots. Do not remove the microSD card when
the camera is powered on.
5
PoE Network
For network and PoE connections
6
Default Button
Press the button with a proper tool for at least 20 seconds
to restore the system.
7
Power LED
For power connection indication (green light)
8
Power (DC 12V)
For power connection.
10
Alarm I/O
1
Alarm In 2 +
5
Alarm Out +
2
Alarm In –
6
D +
3
Alarm In 1 +
7
D −
4
Alarm Out –
NOTE: If users are to use with AC 24V power adaptor, please first
connect the supplied power switch to the power connector.
NOTE: It is not recommended to record with the microSD card for 24/7
continuously, as it may not be able to support long term continuous data
read/write. Please contact the manufacturer of the microSD card for
information regarding the reliability and the life expectancy.
6
2. Camera Cabling
Please follow the instructions below to complete the cable connections.
2.1 Power Connection
For power connection, please refer to section Connectors. Alternatively, users
can power the camera by PoE if a Power Sourcing Equipment (PSE) switch is
available. Refer to the section below for Ethernet cable connection.
NOTE: If PoE is used, make sure PSE is in used in the network.
2.2 Ethernet Cable Connection
To have best transmission quality, cable length shall not exceed 100 meters.
Connect one end of the Ethernet cable to the RJ-45 connector of the camera,
and plug the other end of the cable to the network switch or PC.
NOTE: In some cases, Ethernet crossover cable might be needed when
connecting the camera directly to the PC.
Check the status of the link indicator and the activity indicator LEDs. If the LEDs
are unlit, please check the LAN connection.
Green Link Light indicates good network connection.
Orange Activity Light flashes for network activity indication.
2.4 Alarm I/O Connection
The camera supports one alarm input and one relay output for alarm application.
Refer to alarm pin definition below to connect alarm devices to the IP camera if
needed.
1. Alarm In 2 +
2. Alarm In −
3. Alarm In 1 +
4. Alarm Out -
5. Alarm Out +
7
2.5 RS-485 Connection
The RS-485 connector is the interface for connecting with the pan & tilt
positioning system.
6. D +
7. D -
8
3. System Requirements
To perform the IP camera via web browser, please ensure the PC is in good
network connection, and meet the system requirements as described below.
Items
System Requirement
Personal Computer
Minimum :
1. Intel® CoreTM i5-2430M @ 2.4 GHz
2. 4 GB RAM
Recommended :
1. Intel® CoreTM i7-870 @ 2.93 GHz
2. 8 GB RAM
Operating System
Windows VISTA / Windows XP / Windows 7
Web Browser
Microsoft Internet Explorer (recommended)
Firefox
Chrome
Safari
Network Card
10Base-T (10 Mbps), 100Base-TX (100 Mbps) or
1000Base-T (1000 Mbps) operation
Viewer
ActiveX control plug-in for Microsoft IE
9
4. Access Camera
For initial access to the IP camera, users can search the camera through the
installer program: DeviceSearch.exe, which can be found in “DeviceSearch”
folder in the supplied CD.
Accessing the Camera by Device Search Software
Step 1: Double click on the program Device Search.exe.
Step 2: After its window appears, click on the <Device Search> button on the
top. All the finding IP devices will be listed in the page.
Step 3: Find the camera in the list by its IP address and click on it. The default
IP address of the camera is: 192.168.0.250.
Step 4: The default IP address of the camera may not be in the same LAN as
the IP address of the PC. If so, the IP address of the camera needs to
be changed. Right click on the camera and click <Network Setup>.
Meanwhile, record the MAC address of the camera, for future
identification.
Step 5: The <Network Setup> page will come out. Select <DHCP> and click
<Apply> down the page. The camera will be assigned with a new IP
address.
Step 6: Click <OK> on the Note of setting change. Wait for one minute to
re-search the camera.
Step 7: Click on the <Device Search> button to re-search all the devices. Find
the camera in the list by its MAC address. Then double click or right
click and select <Browse> to access the camera directly via a web
browser.
Inhaltsverzeichnis
