Sitecom LN-520 Bedienungsanleitung

LN#520/530/540*

Full manual Sitecom Homeplug

User Manual

Version 1.2

Full manual Sitecom Homeplug

Table of Contents

1. Safety instructions........................................................................................................... 4!

2. Introduction..................................................................................................................... 5!

2.1 What exactly is Homeplug?...................................................................................... 5!

Cost factor and transmission quality........................................................................... 5!

Data security and radiation ......................................................................................... 5!

2.2 Package Contents...................................................................................................... 5!

4.1 Install the Master Homeplug..................................................................................... 8!

4.2 Install the Slave Homeplug....................................................................................... 9!

4.3 Install the software.................................................................................................. 11!

4.3.1 Mac OSX or other OS users............................................................................. 11!

4.3.2 Microsoft Windows users ................................................................................ 11!

5. Configure the network with the utility.......................................................................... 17!

6. Add an extra Homeplug to an existing network ........................................................... 20!

1. Install the Hardware.................................................................................................. 20!

2. Add a Slave Homeplug to a secured network........................................................... 21!

3. Configure your secured network............................................................................... 23!

7. Setting security with the push button method............................................................... 26!

7.1 Create a private encrypted network ........................................................................ 27!

7.2 Add an extra Homeplug.......................................................................................... 28!

7.3 Remove a device from a network Group ................................................................ 28!

7.4 Make two public network devices private .............................................................. 28!

7.5 Standby Mode ......................................................................................................... 28!

Appendix: Declaration of Conformity .............................................................................. 29!

Full manual Sitecom Homeplug

1. Safety instructions

All safety and operating instructions should be read and understood before using

the device, and should be kept for future reference.

•Never open the Homeplug adapter. There are no user-serviceable parts

inside the Homeplug adapter.

•Do not try to service this product yourself! Contact qualified technicians

each and every time your device needs maintenance. There is a risk of

electric shock!

•Use the Homeplug adapter in a dry location only.

•Do not insert any objects into the openings of the Homeplug adapter.

•To disconnect the Homeplug adapter from the power supply grid, pull the

power plug.

•Do not keep the Homeplug adapter in direct sunlight.

•Slots and openings on the case serve as ventilation. Never block or cover

them.

•Never set up the Homeplug adapter near a heater or radiator.

•The Homeplug adapter should be located only where sufficient ventilation

according to the instructions of the manufacturer can be ensured.

•Disconnect the Homeplug adapter from the power supply grid before

cleaning. Use a moist towel to clean the device. Never use water, paint

thinner, benzene, alcohol or other strong cleaning agents when cleaning

the device, as these could damage the case.

•Never use the Homeplug adapter with a power supply that does not meet

the specifications provided on the rating plate. If you do not know what

type of power supply you have at home, contact your dealer or energy

supplier.

•In the event of damage, disconnect the Homeplug adapter from the power

supply grid and contact customer service. This applies, for example

oIf the power cable or plug is damaged

oIf liquid has been spilled on the Homeplug adapter or objects have

fallen into the device.

oIf the Homeplug adapter has been exposed to rain or water.

oIf the Homeplug adapter does not work, even though the operating

instructions have been followed properly.

oIf the Homeplug adapter’s case is damaged.

Full manual Sitecom Homeplug

2. Introduction

In this chapter, we will provide an overview of the Homeplug technology and

introduce it briefly.

2.1 What exactly is Homeplug?

Homeplug is home and office networking using the electric wiring already

installed in the building.

Cost factor and transmission quality

Homeplug is an economical and easy-to-use networking technology. You don't

need to lay cables and you can connect to the home network at every power

point.

The Homeplug standard modulates and demodulates additional frequencies on

the power lines. Modulation and demodulation is a well-known and proven

method of data transmission, which has been in use in other applications for a

number of years. Now it is used to set up Internet and network accesses in the

home or office. Depending on the damping factor, distances of at least 200

meters can be covered.

With a maximum data rate up to 500 Mbps and symmetrical upload and

download speeds, Homeplug is comparable to traditional Ethernet network

solutions.

Data security and radiation

128-bit AES encryption is used, which guarantees secure data transfer within the

network.

2.2 Package Contents

Open the package carefully, and make sure that none of the items listed below

are missing. Do not discard the packing materials, in case of return; the unit

must be shipped back in its original package.

•The Homeplug device. In case of the LN-530 you’ll find a Master and a

Slave Homeplug. In case of the LN-540 you’ll find a Master and 2 Slave

Homeplugs.

•A CD containing manuals and utility.

•A quick installation guide.

•Two CAT 5e Ethernet cables.

Full manual Sitecom Homeplug

3. Introduction of the hardware

Power LED

ON: Power on and ready.

BLINKING:

1. (blink at slower rate) means Standby mode, or

2. During Group pairing procedure, the device joining or being joined into

same logical network will continue to blink for 2 minutes until the procedure is

successful or is canceled). To enter or cancel the Group pairing procedure,

just press the GROUP button 2~3 sec.

OFF: Power off.

PLC Link/Activity

LED

ON: Power line Link detected but no power line traffic.

BLINKING:

1. Fast blinking (0.06 s ON/ 0.06 s OFF): Power line data rate higher than

60Mbps.

2. Normal blinking (0.2 s ON/ 0.2 s OFF) Power line data rate between10Mbps to

60Mbps.

3. Slow blinking (1 s ON/ 1 s OFF): Power line data rate slower than 10Mbps.

OFF: Power line Link not detected (either other devices in same network are too

far to communicate or it is alone in its logical network).

Ethernet

Link/Activity LED

ON: Ethernet Link Detected.

BLINKING: Ethernet traffic detected.

OFF: No Ethernet Link detected.

GROUP&button&Reset&button&

Power&LED&PLC&Link/Activity&

& & Ethernet&Link/Activity&

Full manual Sitecom Homeplug

RESET Button

Press the button when the device is powered on (not standby) to restore to Factory

default settings (including PLC network group name).

Every new PLC devices has the factory default network group name of

HomePlugAV. During trouble shooting, power line network communication and

network group assignment.

GROUP Button

Press 10 seconds: clear the current network group name and randomly generate a

new network group name.

Press 2 to 3 seconds: this will enter Group pairing mode. In this mode the device

will join into an existing logical network of other device or announce its network

group name for other devices to join. This mode automatically ends after two

minutes or when it is successful, manually stopped. Press this button 2 to 3

seconds will manually stop the Group pairing mode.

Full manual Sitecom Homeplug

4. Install the hardware

Note: If you use this manual to add a single Homeplug to an already existing

Homeplug network, please follow the steps as described in Appendix A.

4.1 Install the Master Homeplug

Start with the Homeplug which is labeled as ‘Master’. You’ll see this on the

backside of the Homeplug.

Plug the Ethernet cable in the Ethernet port on the master Homeplug.

Connect the master Homeplug to your computer and plug it into the socket.

Full manual Sitecom Homeplug

4.2 Install the Slave Homeplug

Take the Homeplug which is labeled as ‘Slave’. You’ll see this on the backside of

the Homeplug.

Plug the Ethernet cable in the Ethernet port on the slave Homeplug.

Connect the slave Homeplug to your Internet router and plug it into the socket.

Full manual Sitecom Homeplug

Your network is now fully functional. Follow the next steps to secure your

network.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sitecom Adapter Handbücher

Sitecom

Sitecom homeplug Bedienungsanleitung

Sitecom

Sitecom AC1200 Bedienungsanleitung

Sitecom

Sitecom AD-1004 Bedienungsanleitung

Sitecom

Sitecom PRO LINE AD-1018 Bedienungsanleitung

Sitecom

Sitecom AD-1002 Bedienungsanleitung

Sitecom

Sitecom USB to Fast IrDA Bedienungsanleitung

Sitecom

Sitecom AD-1012 Bedienungsanleitung

Sitecom

Sitecom AD-1014 Bedienungsanleitung

Sitecom

Sitecom LN-554 Bedienungsanleitung

Sitecom

Sitecom CN-5501 Bedienungsanleitung

Sitecom

Sitecom WLX-2004 Bedienungsanleitung

Sitecom

Sitecom CN-5505 Bedienungsanleitung

Sitecom

Sitecom PRO LINE AD-1003 Bedienungsanleitung

Sitecom

Sitecom AD-1001 Bedienungsanleitung

Sitecom

Sitecom CN-5507 Bedienungsanleitung

Sitecom

Sitecom AD-1005 Bedienungsanleitung

Sitecom

Sitecom CN-5503 Bedienungsanleitung

Sitecom

Sitecom CN-516 Montageanleitung

Sitecom

Sitecom AD-1010 Bedienungsanleitung

Sitecom

Sitecom CN-7001 Bedienungsanleitung

Sitecom

Sitecom CN-390 Bedienungsanleitung

Sitecom

Sitecom CN-105 Bedienungsanleitung

Sitecom

Sitecom CN-508 Bedienungsanleitung

Sitecom

Sitecom WL-603 Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung