ID: 640012L
ACTIVATION AND SERVICE
The data management for Panel Link™remote cellular devices is hosted by: AMI Global Incorporated,
6280 S. Valley View Blvd. Suite 212, Las Vegas, NV 89118
All SJE Panel Link™RTUs are provided with a year of pre-paid cellular service. Activation of your
device is required for operation. An account needs to be setup with AMI if this is your first Panel Link™
device. AMI will contact you directly for service payment after the first year is completed.
Activate a new
SJE Panel Link™device.
User must send Activation request
to a SJE®contact person
including the device ID + existing
account name.
SJE® will forward request to AMI via:
Support @aquamanagement.com
Device typically activated within 2
hours
(During office hours 9am-5pm Pacific
time.)
User must fill in the Account Setup
form and send it to a SJE Panel
Link™contact person.
Data needed:
- Device ID number
- Name and email of End User
(will get the bill for service after the
first year)
- New Account name
(Example: City of Fargo)
- User login name request.
SJE® will forward request to AMI via:
Support @aquamanagement.com
New Account will be created within 24
hours + device activated.
End User
Will receive login instructions via email.
Will verify contact and billing information.
Existing account?
(User already has an
account and
SJE Panel Link™devices)
YES NO
SJE Panel Link™ID number (Located on the device)
LIGHT:
ID: 64XXXLIGHT - LTE
PREMIUM:
ID: 69XXXPREMIUM - LTE
GATEWAY:
ID: 67XXXGATEWAY - LTE
The Account Setup Form (on the next page) can be downloaded from:
https://www.sjerhombus.com/products/sje-panel-link/
https://csicontrols.com/product/sje-panel-link
SJE Panel Link™– Cellular RTU
SJE Panel Link
™Account Setup and Activation Form
New or Existing account information
Name: Example: City of Fargo
First Name: Example: John
Last Name: Example: Doe
Address: Example: jdoe@cfargo.gov
Phone: Example: (123) 456-7890
ng Address: Example: 1234 Elm St
y, State, Zip Example: Fargo, MN 58102
n User Name: Example: Fargo123
Unit ID: Example: 68023
uld use this form?
who wish to create an account for monitoring Panel Link units.
will be responsible for the service fee after the initial period is complete.
Lite = 1 year. Panel Link Premium = 1 year)
of End Users: A City, Municipality, Water district, Utility Service Company, etc…
te an account?
provides contact and billing information to AMI (Service Company). This will allow them to contact the End
ctly with service renewal options after the initial period is complete.
d password will be setup to grant access to the SJE-Rhombus (www.sjerhombuslogin.com) web portal.
send this form?
this form and send to your SJE-Rhombus contact person:
kwine (800-746-6287 x3345) Jeremy.Drinkwine@sjerhombus.com
create a new account?
must be submitted at least 24 hours prior to the Panel Linkactivation.
ens next?
form is submitted, the End User will receive an e-mail (sent to the email address entered in this form) from
a link and instructions for login and account verification. Click on the link or cut and paste it into our
Once the account is verified, power up the device for final activation and setup. The device is then ready for
For security reasons, this must be done within 48 hours or the link will de-activate.
ation of future Pump Watch RTUs
account is setup, the End User can activate additional Panel Links in the future by filling in the Account
the Device ID of the Panel Link device that needs to be activated.
SJE® 4 SJE Panel Link™RTU User Manual
