AccuFlo®Zero –Installation and Operating Instructions
Installation and operating instructions AccuFlo®Zero
1 General information
1.1 Safety information
This device left the factory free from safety problems. In order to maintain this status and to ensure safe
operation of the device, please observe the safety information and warnings contained in this instruction.
The device/system may only be set up and used in conjunction with this documentation.
Correct, reliable operation of the product requires proper transport, storage, positioning and assembly
as well as careful operation and maintenance by qualified personnel.
This device may only be used for the applications described in the technical description and only in
connection with devices or components from other manufacturers which have been approved or
recommended by S.K.I. GmbH.
You are obliged to respect the test certificates, provisions and laws applicable in your country during
connection, assembly and operation of the device/system.
The device can be operated both at high pressure and with aggressive and hazardous media.
Therefore, improper use of this device may lead to serious injury and/or considerable damage to
property. Especially, it must be noted when the device was in use and is to be exchanged.
Commissioning and operation of a device/system may only be performed by qualified personnel. This
personnel has to see to it that appropriate voltage is used (see type stamp), that ensures that in normal
operation or in case of default of the device or of components no hazardous voltages may damage the
device. Insofar, improper use of this device may lead to serious injury and / or considerable damage to
property.
1.2 Qualified personnel
The installation and operating must be realized by qualified personnel. Qualified personnel includes persons
familiar with the installation, assembly, commissioning and operation of the product and who have the
appropriate qualifications for their activities such as
They are authorized, trained or instructed in operating and maintaining devices and systems according
to the safety regulations for electrical circuits, for media under high pressure or aggressive or hazardous
media.
For explosion-proof devices: They are authorized, trained, or instructed in carrying out work on electrical
circuits for hazardous systems.
They are authorized, trained or instructed in safety standards for maintenance and use of appropriate
safety equipment.
Training in first aid.
1.3 Further information
For clarity reasons, this notice does not contain all detailed information of all types of products and may not
consider every possible application or maintenance.
Attention: If you need more information or have particular problems which are not covered sufficiently by the
operating instructions, get in touch with S.K.I. GmbH directly (see last page). You may find contact information
in the internet.
The contents of these instructions shall not become part of or modify any prior or existing agreement,
commitment or legal relationship. All obligations on behalf of S.K.I. GmbH are contained in the respective sales
contract which also contains the complete and solely applicable warranty conditions. Any statements contained
herein do not create new warranties or modify the existing warranty.
The content reflects the technical status at the time of printing. We reserve the right to make technical changes
in the course of further development.
