www.skycat.pro
All Rights Reserved
3
Skycat launcher
-Do not trigger Skycat launcher empty. Piston may slide out and break.
-Do not eject on grass, sand or other loose materials. Airflow generated by
the piston can lift debris into the launcher.
-Only use Skycat launcher to eject a parachute and not other items.
-Use of safety goggles is recommended while arming the launcher.
-If launcher stays loaded over two months without launching, it is
recommended to open and refold the parachute. This may decrease
deployment time in an emergency situation.
-Do not swing loaded launcher around. G-forces can slide the parachute
out accidentally.
-Only use original Skycat cloth for parachute folding.
-Mount Skycat launcher without applying pressure to the launcher tube to
avoid jamming of the piston.
-Use high leverage pliers to squeeze Fuse locks properly. Incorrectly
squeezed fuse can cause an unwanted launch!
Skycat trigger
-Do not connect a fuse directly to the trigger output!
-Only use trigger to conduct current through an armed Skycat launcher.
-Handle and mount trigger carefully, components are not protected against
mechanical impact.
-Incorrect connections may damage the trigger!
-Power cable polarity incorrect, ie. positive to negative.
-Power and launcher cables connected in reverse, ie. battery to
launcher cables and vice versa.
