3. Timer
The timing fuction is designed for you to automatically turn on (when the machine
is off), or to turn off (when the machine is on) the machine by the timer.
Press the timer button you can set the timer within the range of 0-12 hours at the
interval of 1 hour. Each time you press this button, the value will increase by 1 hour
and the corresponding timing value will be displayed on the screen.
When you set the timer, the setting time will flash on the screen to show the setting
value.
If you successfullly set the timer, the timer indicator will be on, and the screen will
the display the setting time when you press the “TIMER” button again.
If you set the timing value to “00”, it is called the invalid setting time or to cancel
the timing function.
MACHINE SETUP & OPERATION
● Auto Mode
Both the fan speed and the humidity value can be adjusted under Auto Mode, and the
“HUM SET” indicator will light up at this mode.
When environmental humidity ≥ set humidity by 3%RH, the fan will start to work and
compressor will start 3 seconds afterwards. When environmental humidity ≤ set
humidity by 3%RH, the compressor will stop working, the fan will stop after 30
seconds’ delay.
● Continuous Drying Mode
The machine continues to run, but the humidity can not be adjusted at this mode, the
sleep indicator “ ” will light up.
● Sleeping Mode
Neither the fan speed nor the humidity value can not be adjusted under sleeping mode.
Press the “MODE” button you can choose the Sleep Mode, the sleep indicator “ ”
will light up and start this function.
If no operation within 10 seconds, all indicators will turn dark gradually and the wind
speed is automatically switched from high to low. You can press any button to wake up
the indicator. Press the “MODE” button again will exit the Sleep Mode.
When environmental humidity ≤ 57%, the compressor will stop working and the fan
will shut down after 30 seconds’ delay. When environmental humidity ≥ 63%RH, the
fan will start working and compressor starts after 3 seconds.
