SMART-AVI SM-DVN-84X Bedienungsanleitung

SM-DVN-84X

Quick Start Guide

A full Manual can be downloaded from

www.smartavi.com/SM-DVN-84-X/

Matrix KVM Switch

WHAT’S IN THE BOX

PART NO. QTY DESCRIPTION

SDVN-84-X 1 8-port, 4 User DVI-D Matrix KVM Switch

PS12VD3A 1 12V DC, 3A power adapter with center-

pin positive polarity.

1 Quick Start Guide

NOTICE

The information contained in this document is subject

to change without notice. SmartAVI makes no

warranty of any kind with regard to this material,

including but not limited to, implied warranties of

merchantability and fitness for particular purpose.

SmartAVI will not be liable for errors contained

herein or for incidental or consequential damages in

connection with the furnishing, performance or use of

this material. No part of this document may be

photocopied, reproduced, or translated into another

language without prior written consent from

SmartAVI, Inc.

Toll Free: (800) AVI-2123

Phone: (702) 800-0005

2455 W. Cheyenne Ave, Suite 112

North Las Vegas, NV 89032

smartavi.com

ADVANCED 8-PORT, 4 USERS

SINGLE-HEAD DVI-D MATRIX

KVM SWITCH WITH AUDIO

TECHNICAL SPECIFICATIONS

VIDEO

Format DVI Dual Link

Maximum Pixel Clock 165 MHz

Input Interface (8) DVI-D 29-pin (female)

Output Interface (4) DVI-D 29-pin (female)

Resolution 2560 x 1600 @ 60Hz

DDC 5 volts p-p (TTL)

Input Equalization Automatic

Input Cable Length Up to 20 ft.

Output Cable Length Up to 20 ft.

USB

Signal Type USB 2.0, 1.1, and 1.0 w/ internal hub

Input Interface (8) USB Type B

Output Interface

(8) USB 1.1 Type A for KVM Devices;

(8) USB 2.0 Type A Transparent

AUDIO

Input (8) Connector Stereo 3.5mm Female

Output (1) Connector Stereo 3.5mm Female

POWER

Power Requirements 12V DC, 3A power adapter with center-

pin positive polarity

ENVIRONMENT

Operating Temp 32° to 104° F (0° to 40° C)

Storage Temp -4° to 140° F (-20° to 60° C)

Humidity 0-80% RH, non-condensing

CONTROL

Front Panel Push Buttons with LED indicators

RS-232 Via Serial @ 9600 bps

Hot Keys Via Keyboard

OTHER

Emulation Keyboard, Mouse and Video

FRONT PANEL

 Contol/View - Toggle between Control and View mode

 UP- Increment channel, loop back to 1 after 8

 DOWN - Decrement channel, loop back to 8 after 1

 Press and hold the Control/View button, then press the DOWN

button - disables the display and KM control for that user.

HARDWARE INSTALLATION

1. Ensure that power is turned off or disconnected from the unit and the computers.

2. Use DVI cables to connect the DVI output ports from each computer to the corresponding DVI-D IN

ports of the unit.

3. Use a USB cable (Type-A to Type-B) to connect a USB port on each computer to the respective USB

ports of the unit.

4. Optionally connect a stereo audio cable (3.5mm to 3.5mm) to connect the audio output of the

computers to the AUDIO IN ports of the unit.

5. Connect monitors to the DVI-D OUT console ports of the unit using DVI cables.

6. Connect a USB keyboard and mouse in the two USB console ports.

7. Optionally connect stereo speakers to the AUDIO OUT port of the unit.

8. Finally, power on the Matrix by connecting a 12VDC power supply to the power connector, and then

turn on all the computers.

EDID LEARN

The KVM is designed to learn the EDID of the

monitor connected to Console 1 upon power up.

In the event of connecting a new monitor to the

KVM, a power re-cycle is required.

SYSTEM CONTROL

There are three ways to control the SM-DVN-84X:

Keyboard HotKeys, RS-232 Serial Commands,

and Front Panel Buttons.

The settings for the serial connection are as

follows: Baud rate: 9600; Data Bits: 8;

Parity: None; Stop Bits: 1; Flow Control: None.

The following commands can be used:

Command HotKey RS-232

Switch Control [CT][CT]c[#] //c[u][#]

Switch View [CT][CT]v[#] //v[u][#]

Audio Only [CT][CT]a[#] //a[u][#]

Learn EDID [CT][CT]e<CR> //e <CR>

SW Reset [CT][CT]r //r <CR>

Status Query N/A //?? <CR>

Current HK

Trigger

[Alt][Alt][Alt]

k0 <CR>

//hk <CR>

Update HK Trig-

ger

[HK][HK] k

[1|2|3] <CR>

N/A

Note—All HotKey and RS-232 commands end

with <CR>

Chart Key

[CT] = Ctrl

[u] = User Console to update [1-8]

<CR> = Carriage Return (Enter Key)

[HK] = Current Hot Key Trigger

Andere SMART-AVI Schalten Handbücher

SMART-AVI

SMART-AVI QKVMPro Bedienungsanleitung

SMART-AVI

SMART-AVI SM-MST-4D Bedienungsanleitung

SMART-AVI

SMART-AVI DPN-4P Bedienungsanleitung

SMART-AVI

SMART-AVI SM-UHO Series Bedienungsanleitung

SMART-AVI

SMART-AVI HKM-02 Bedienungsanleitung

SMART-AVI

SMART-AVI SM-DVN-2S Bedienungsanleitung

SMART-AVI

SMART-AVI DPN-4QUAD Bedienungsanleitung

SMART-AVI

SMART-AVI DVN-4DUO-DL Bedienungsanleitung

SMART-AVI

SMART-AVI SM-HDN-4Q Bedienungsanleitung

SMART-AVI

SMART-AVI DV-SW8-p Bedienungsanleitung

SMART-AVI

SMART-AVI DVN-8Pro Bedienungsanleitung

SMART-AVI

SMART-AVI QuadKVM Bedienungsanleitung

SMART-AVI

SMART-AVI DPN-4P Bedienungsanleitung

SMART-AVI

SMART-AVI DVN-4P Bedienungsanleitung

SMART-AVI

SMART-AVI DPN-2P Bedienungsanleitung

SMART-AVI

SMART-AVI DVN-4P Bedienungsanleitung

SMART-AVI

SMART-AVI SM-D2H-4D Bedienungsanleitung

SMART-AVI

SMART-AVI DVN-4QUAD Bedienungsanleitung

SMART-AVI

SMART-AVI SKM-08-S Bedienungsanleitung

SMART-AVI

SMART-AVI SM-UHS-4S Bedienungsanleitung

SMART-AVI

SMART-AVI HDN-4 Duo Bedienungsanleitung

SMART-AVI

SMART-AVI HR4P Bedienungsanleitung

SMART-AVI

SMART-AVI SM-DVN-8S-S Bedienungsanleitung

SMART-AVI

SMART-AVI DVNET-4Trio-DL Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch