SMART-AVI HDR16X16 Bedienungsanleitung

Made in U.S.A. www.SmartAVI.com 1-800-AVI-2131

HDR16X16

UserManual

16-Port HDMI Matrix Switch with Front Panel, RS-232 &

Optional TCP/IP Control

16 Port HDMI Matrix Switch

TABLE OF CONTENTS 

WHAT'S IN THE BOX? 2

INTRODUCTION 3

FEATURES 3

APPLICATIONS 3

TECHNICAL SPECIFICATIONS 4

HARDWARE INSTALLATION 5

FRONT PANEL CONTROL 6-8

ESTABLISHING AN RS-232 CONNECTION 9

USING THE SmartControl SOFTWARE 10-12

USING A TERMINAL APPLICATION FOR REMOTE CONTROL VIA RS-232 13-15

COMMAND MODE 16-17

LIMITED WARRANTY STATEMENT 18

Using TCP/IP Control (Optional) 17

PART NO. QTY DESCRIPTION

HDR16X16 1 16 Port HDMI Matrix Switch

CCPWR06 1 Power Supply Cord

1 Quick Start Guide

WHAT’S IN THE BOX?

Figure 2-1

INTRODUCTION

The HDR16X16 conforms to the HDMI (High Definition Media Interface) standard with HDCP compliance

and provides a connection to view any of sixteen HDMI video sources on any combination of sixteen video

displays. The HDR16X16 provides HDMI output up to 40 feet away at resolutions up to 1080p. The sys-

tem works with Blu-ray players, TiVo systems, HTPCs, and satellite set-top boxes that connect to an HDMI

display. Users can switch to any source locally using the Front Panel or remotely via RS-232 with Win-

dows®-based software that is easy to understand and simple to use, a cornerstone of all SmartAVI prod-

ucts. It can be optionally controlled via TCP/IP using the NET-IP-PRO from SmartAVI.

FEATURES

 Switches 16 HDMI inputs with 16 HDMI outputs

 Sources can be routed independently to displays

 Switching controlled via the front panel, RS-232 and TCP/IP with optional NET-IP-PRO

 Supports high definition video resolutions of 480p, 720p, 1080i and 1080p

 Supports 7.1 Digital Surround Sound Audio

 HDCP and HDMI 1.4 compliant

 Supports EDID for total control of compliant displays

 Learn EDID from any display

 Delivers uncompressed digital video with zero signal loss

 Outputs HDMI up to 40 feet (with high-quality 24AWG or better cable)

 Rack-mountable

 Front panel can be locked to prevent accidental changes

APPLICATIONS

 Wall Displays

 Digital Signage

 Airports

 Dealer Rooms

 Control Rooms

 Audio/Visual Presentations

 Shopping Centers

 Security

 Point-of-Sale

 Hotels/Resorts

TECHNICAL SPECIFICATIONS

VIDEO

HDTV Resolutions 480p, 720p, 1080i, 1080p, Supports all DVI-D Resolutions

TV Resolution 480i

Input Interface (16) HDMI Type A 19-pin Female TMDS

Output Interface (16) HDMI Type A 19-pin Female TMDS

Input Cable Length Up to 40 ft.

Output Cable Length Up to 40 ft.

CONTROL

Front Panel Buttons & LCD Display

RS-232 DB9 Female, 9600 bps, N, 8 1, No flow control

TCP/IP Optional with NET-IP-PRO

OTHER

Warranty Limited 1 Year Parts and Labor

Power 100-240 VAC

Dimensions 17 3/8”W x 7 7/8”H x 11 1/2”D

Front Panel is 19” wide to fit a 19” rack

Weight 17.3 lbs.

ENVIRONMENTAL

Operating Temperature 0 to +40° C (+32° to 104° F)

Operating Humidity 10% to 85% (Non-condensing)

Storage Temperature -20° to +60° (+20° to +140° F)

Storage Humidity 10% to 85% (Non-condensing)

Figure 4-1

RESET BUTTON: Sets the HDR16X16 to the default factory configuration. The reset button is shown on

the left side of Figure 4-1.

HARDWARE INSTALLATION

1. Turn off all input devices and displays.

2. Connect male to male HDMI cables to the input devices or sources and the “IN” ports on the

HDR16X16.

3. Connect the displays to the “OUT” ports on the HDR16X16.

4. Power on the input devices and the displays.

5. Connect the power cord and power-on the HDR16X16.

IMPORTANT:

Each input and output can support up to 10mA/5VDC.

Do not connect extenders that are powered by HDMI.

Figure 5-1

FRONT PANEL CONTROL

There are multiple ways to control the HDR16X16: via the front panel, via RS-232 using the SmartControl

software, via RS-232 commands (with AMX, Crestron), and with an optional TCP-IP module.

Input and output are relative to the HDR16X16. Output refers to displays or monitors. Input refers to

video sources such as DVD players or computers.

During normal operation, you will see a list of ports on the front panel display. See Figure 6-2.

Default Display HDR16X16

Figure 6-1

Figure 6-2

RS-232 Acknowledge: Sets the HDR16X16 to send a confirmation that an RS-232 command has been

received. The enter key toggles this on and off.

Send Update: Sets the HDR16X16 to send an RS-232 command back to the controller when the configu-

ration is changed via the front panel. The enter key toggles this on and off.

Memory Save: Sets the HDR16X16 to save the configuration when powered off. The enter key toggles this

on and off.

Display Input Status: This displays the status of the inputs. If no input is present, the display will read

NONE. See figure 7-2.

Restore Factory Settings: This sets the HDR16X16 to factory defaults and reboots. See figure 7-3.

Manage EDID: “1) Learn EDID from monitor” only learns from the monitor connected to output port 1.

See figure 7-4.

Figure 7-2

Figure 7-3

Figure 7-4

Figure 7-1

FRONT PANEL CONTROL (Continued)

Main Menu

To view the menu, press MENU. There are 6 menu options available: Use the UP and DOWN keys to posi-

tion the cursor next to the desired item and press the ENTER key to open the items display or toggle the

item on or off. Press ESC to return to the Main Menu display.

To assign a display (output) to a video source (input) using the front panel controls perform

the following:

Press the SWITCH key, The “Select OUTPUT” screen will display. See figure 8-2.

Press the number key for the display (output) and press the ENTER key.

The “Set INPUT” screen will now display. See figure 8-3.

Press the number key for the source (input) and press the ENTER key.

An alternative way to assign an output to an input is:

Press SWITCH. A blinking block cursor will appear. Use the UP and DOWN keys to select the output/

display that you would like to assign. Once the cursor is over the desired output port, press ENTER.

Press the UP and DOWN keys to select the input/source port. Once you have selected an input, press EN-

TER to save the configuration. To return to the default screen, press ESC.

IMPORTANT: Because HDCP takes time to negotiate, when switching ports, wait 2 seconds for the proc-

ess to complete. Failure to do so may cause an error with the HDCP and the HDR16X16 may lock up.

Figure 8-2

Figure 8-3

Figure 8-1

FRONT PANEL CONTROL (Continued)

ESTABLISHING AN RS-232 CONNECTION

Before you start:

Controlling a Smart-AVI device via RS-232 requires an RS-232 card installed on your computer or a USB

to RS-232 adapter. Below are instructions on how to create an RS-232 connection between a PC and the

Smart-AVI device.

Use terminal client software such as the PuTTY to connect to the Smart-AVI device. Make sure to use

communication settings 9600 bps, N, 8, 1, No flow control.

Check the device and your PC to determine if you need a male to male or a male to female cable and how

long it needs to be. The Smart-AVI device requires a straight through cable. You can use a Null Modem

Adapter to convert a crossed cable to a straight through cable. Examples of crossed and straight thorough

cable pin-outs are shown below. The standard maximum length for an RS-232 cable is 50 feet. Call our

Smart-AVI Support Engineer if you require more information.

Figure 9-1

Examples of 9 pin RS-232 Straight Through and Crossed Cables

Establish a connection to the Smart-AVI device:

1. Connect an RS-232 cable to the RS-232 connector on the PC.

2. Connect the other end of the cable to the RS-232 port of the Smart-AVI device.

3. Use Windows Control Panel / Device Manager to identify the Com port number. See instructions and

Figure 9-2 below.

4. Power on the device.

If you are using a USB to COM port adapter on a Win-

dows PC and need to identify the COM port used, do

the following:

1. Click on the start button.

2. Click on Control Panel.

3. Click on Device Manager.

4. Click on the arrow next to Ports (COM & LPT).

You should see the name of your adapter and the

COM port number in use.

Figure9-2

USING THE SmartControl SOFTWARE

RS-232: Controlling the HDR16X16 has never been simpler with SmartControl software. With SmartCon-

trol, you can assign a unique name to each port on the HDR16X16, as well as each display, customizing

projects to meet your needs. Although all the functions of the matrix are available locally on the front

panel of the HDR16X16, using SmartControl allows for customization of all the matrix functions.

 Download the Smart Control Pro software from the Smart-AVI website. www.smartavi.com

 Double click SmartControlPro-v5-0-03_Installer.exe in order to initiate software installation.

 Click Install. After installation has completed, click CLOSE.

 In order to use the software, click on the START button>Programs>SmartControl Pro.

 There you should see a help file, the SmartControl Pro launcher as well as a shortcut to uninstall

SmartControl Pro.

Click on SmartControl Pro in order to launch the software. When the software starts you will see a

screen like this:

Advanced Configuration:

If you have more than one

Router installed you will

want to check this box.

Router Type:

Select HDR16X16

Inputs/Outputs:

Enter the number of Inputs/Outputs your HDR16X16 has.

The HDR16X16 can have up to 16 inputs and 16 outputs.

Com Port:

Select the appropriate com port that your computer is using to access the router.

To find the com port number that your computer is using click on the Start Menu. Right click on computer.

Click on Properties. Click on Device Manager. Click on the symbol next to Ports (COM & LPT). Your com

port number should be listed here.

Router Time out:

This field is set to 0 by default, meaning the computer acknowledges commands almost instantly. Some-

times a computer takes longer to respond. This setting should be left at 0. If you need to change it, it

should be no higher than 0.2.

After you have entered in the necessary information click OK. This will now take you to the Main Routing

Window where you can route the different video/audio connections.

Figure 10-1

Inhaltsverzeichnis

Andere SMART-AVI Schalten Handbücher

SMART-AVI

SMART-AVI D2H-4P Quad Bedienungsanleitung

SMART-AVI

SMART-AVI SM-DVN-4S Bedienungsanleitung

SMART-AVI

SMART-AVI SM-DVN-4D Bedienungsanleitung

SMART-AVI

SMART-AVI DPN-4DUO Bedienungsanleitung

SMART-AVI

SMART-AVI SM-DPN-4Q-S Bedienungsanleitung

SMART-AVI

SMART-AVI HDN-4 Quad Bedienungsanleitung

SMART-AVI

SMART-AVI DPN-2P Bedienungsanleitung

SMART-AVI

SMART-AVI DPN-4 Quad Bedienungsanleitung

SMART-AVI

SMART-AVI HDR8x8 LP Bedienungsanleitung

SMART-AVI

SMART-AVI V2VMax Bedienungsanleitung

SMART-AVI

SMART-AVI DV-SW4S Bedienungsanleitung

SMART-AVI

SMART-AVI DPN-4P Bedienungsanleitung

SMART-AVI

SMART-AVI HDMV-8X Bedienungsanleitung

SMART-AVI

SMART-AVI DV-SW2S Bedienungsanleitung

SMART-AVI

SMART-AVI DVN-8PRO Bedienungsanleitung

SMART-AVI

SMART-AVI DVNET-4Quad Bedienungsanleitung

SMART-AVI

SMART-AVI SM-UHN-4Q Bedienungsanleitung

SMART-AVI

SMART-AVI SM-DPN Series Bedienungsanleitung

SMART-AVI

SMART-AVI SM-UHO Series Bedienungsanleitung

SMART-AVI

SMART-AVI DVN-4PRO Bedienungsanleitung

SMART-AVI

SMART-AVI SM-DVN-4S Bedienungsanleitung

SMART-AVI

SMART-AVI DPN-2P Bedienungsanleitung

SMART-AVI

SMART-AVI DVNET-4Trio-DL Bedienungsanleitung

SMART-AVI

SMART-AVI SKM-04-PLUS Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung