SMART Table 230i Bedienungsanleitung

PLEASE THINK BEFORE YOU PRINT

SMART Table™ 230i

Hardware User’s Guide

Product registration

If you register your SMART product, we’ll notify you of new features and software

upgrades.

Keep the following information available in case you need to contact SMART

Technical Support.

Serial Number: ___________________________________________________

Date of Purchase: ___________________________________________________

FCC Warning

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instructions, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the

user will be required to correct the interference at his own expense.

Trademark Notice

DViT, SMART Table, SMART Board, SMART Sync, SMART Podium, smarttech, all SMART taglines and the SMART logo

are trademarks or registered trademarks of SMART Technologies ULC in the U.S. and/or other countries. Windows is either

a registered trademark or a trademark of Microsoft Corporation in the U.S. and/or other countries. Mac and Macintosh are

registered trademarks of Apple Inc. Wi-Fi is a registered trademark of the Wi-Fi Alliance. All other third-party product and

company names may be trademarks of their respective owners.

transcribed, stored in a retrieval system or translated into any language in any form by any means without the prior written

consent of SMART Technologies ULC. Information in this manual is subject to change without notice and does not

represent a commitment on the part of SMART.

Patent No. US6141000; US6326954; USS6741267; US7151533; US7499033; CA2058219; and CA2252302. Other

patents pending.

03/2011

Important information

WARNING

• Failure to follow the installation instructions shipped with your SMART

Table™ could result in personal injury and product damage.

• Ensure that any cables extending across the floor to your SMART Table are

properly bundled and marked to prevent a tripping hazard.

• Make sure an electrical socket is near your SMART Table and remains easily

accessible during use.

• Lock the casters before allowing children to use your SMART Table.

• Do not climb (or allow children to climb) on your SMART Table. Climbing on

your SMART Table could result in personal injury and product damage.

• To reduce the risk of fire or electric shock, do not expose your SMART Table

to rain or moisture.

• Use caution when servicing your SMART Table’s internal parts even after you

disconnect the power. The uninterruptible power supply (UPS) continues to

provide dangerous voltages to the computer and projector after you

disconnect the AC power source.

• Do not stare (or allow children to stare) directly into the projector’s beam

of light.

• Do not attempt to service the projector other than performing routine lamp

replacement. Only an authorized service provider should provide service.

Aside from the lamp module, there are no user serviceable parts inside

the unit.

• Do not remove any screws other than those specified in the lamp replacement

instructions.

• Do not touch or replace the projector lamp (which will be very hot) for at least

an hour after shutdown. Touching the lamp can cause severe burns.

• Do not puncture, crush, heat or disassemble the remote control battery,

expose it to fire or any liquid, short its terminals, or abuse the battery in any

other way because this may cause the battery to explode or ignite, and could

cause a fire or personal injury.

ii | IMPORTANT INFORMATION

• If the remote control battery leaks, ensure that you do not get battery fluid in

your eye. If you do, immediately rinse the affected eye with water and seek

medical attention.

• Do not install the remote control battery backwards or reverse its polarity. Do

not install battery types other than the one specified in the documentation.

Both of these actions can cause damage to the remote control and can cause

a fire or personal injury.

CAUTION

• Disconnect the power cable only after you turn off the table as documented in

this guide and the indicator lights and fans turn off. Disconnecting the power

cable at any other time can cause shorten the life of the projector lamp.

• Do not place cords, boxes or other items on the surface of your SMART

Table. Doing so can scratch the surface.

• If your SMART Table becomes wet, dry it completely before turning it on.

• SMART Technologies recommends that you use the remote control to

complete only the procedures documented in this guide. Using the remote

control for other purposes may change the projector’s settings, which were

specifically configured for the SMART Table.

IMPORTANT

• Do not operate your SMART Table’s projector in environments that are higher

than 10,000' (3000 m) above sea level.

• Your SMART Table is sensitive to infrared light. Turn off or remove any pot

lights or other incandescent lighting in the room and close any open blinds or

curtains before calibrating your SMART Table.

• Your SMART Table’s surface does not respond to touch until the computer

completes its startup process. Wait 30 to 60 seconds after turning on your

SMART Table before touching the surface.

• Before you clean your SMART Table, turn it off so that you do not

inadvertently start applications when you wipe the surface.

• Do not place keyboards, mouse devices or other objects on the touch surface.

The camera may interpret these objects as touches if they are placed on the

touch surface.

• This product contains lithium button cell batteries in the computer

and the remote control (perchlorate material—special handling

may apply).

Contents

1Overview ............................................................................................................... 1

In this chapter ................................................................................................. 1

About your SMART Table............................................................................... 1

How your SMART Table works....................................................................... 2

Standard accessories ..................................................................................... 3

The USB bracelet ..................................................................................... 3

Power cable ............................................................................................. 4

Keys ......................................................................................................... 4

Projector remote control ........................................................................... 4

Installation instructions............................................................................. 4

Warranty information ................................................................................ 4

Uninterruptible power supply (UPS) ......................................................... 4

UPS installation instructions..................................................................... 5

Using the SMART Table with other SMART products .................................... 5

2Using your SMART Table ..................................................................................... 7

In this chapter ................................................................................................. 7

Turning your SMART Table on or off.............................................................. 8

Turning on your SMART Table................................................................. 8

Turning off your SMART Table................................................................. 9

Navigating SMART Table software............................................................... 10

Using SMART Document Camera with your SMART Table......................... 10

3Maintaining your SMART Table .......................................................................... 11

In this chapter ............................................................................................... 11

Cleaning your SMART Table ........................................................................ 11

Updating the software................................................................................... 11

iv | CONTENTS

Orienting the surface .................................................................................... 12

Replacing the projector bulb ......................................................................... 12

4Using the remote control ..................................................................................... 13

Locating the remote control .......................................................................... 13

Setting the projector for high altitude use ..................................................... 14

Replacing the remote control battery............................................................ 14

ATroubleshooting .................................................................................................. 17

Troubleshooting tips ..................................................................................... 17

To restart the table’s software. ........................................................ 18

To check camera cable connections ............................................... 18

Setting up your SMART Table for troubleshooting ....................................... 19

Diagnosing basic problems with touch ......................................................... 20

To access the SMART Touch Service screen ................................. 20

Remodeling the background......................................................................... 21

To restart the drivers in sequence ................................................... 21

Restarting SMART Table Activities............................................................... 22

BHardware environmental compliance .................................................................. 23

Waste electrical and electronic equipment regulations (WEEE directive) .... 23

Restriction of certain hazardous substances (RoHS directive)..................... 23

Batteries........................................................................................................ 23

Packaging ..................................................................................................... 24

Covered electronics devices......................................................................... 24

China’s electronic information products regulations ..................................... 24

U.S. Consumer Product Safety Improvement Act ........................................ 24

CCustomer support................................................................................................ 25

Online information and support..................................................................... 25

Training......................................................................................................... 25

Technical support ......................................................................................... 25

Shipping and repair status ............................................................................ 25

v| –

General inquiries........................................................................................... 26

Warranty ....................................................................................................... 26

Registration................................................................................................... 26

vi | –

Chapter 1

Overview

This guide is intended for teachers and support staff. It introduces you to the SMART

Table interactive learning center and explains how to use, maintain and troubleshoot

your table.

NOTE

For information on setting up your SMART Table, see the SMART Table 230i

textless installation instructions (smarttech.com/kb/141081) included with your

SMART Table.

In this chapter

•About your SMART Table on page 1

•How your SMART Table works on page 2

•Standard accessories on page 3

•Using the SMART Table with other SMART products on page 5

About your SMART Table

Your SMART Table is an interactive learning

center with a touch-sensitive surface. By touching

the surface, students can create, select, move

and resize digital objects. More than one student

can touch the surface at a time. This encourages

collaboration and cooperation as students learn

and play together.

Using the Wi-Fi® network connection to a

SMART Sync™ Teacher computer, a teacher can observe the student’s activities from

a distance, take control of the table, and capture and print the tabletop image.

2 | CHAPTER 1 – OVERVIEW

The software on your SMART Table includes interactive applications, learning

activities and educational games. You can customize the activities using the SMART

Table Toolkit. Install and run the toolkit on your computer and then transfer your

changes to the SMART Table using the USB bracelet or SMART Sync software.

NOTE

SMART Sync software is included with your toolkit. Other versions of SMART

Sync may not be compatible with the toolkit. Contact SMART Technical Support

for more information.

You can use your SMART Table with other SMART products as part of an overall

learning solution. For example, you can introduce a new concept to students on a

SMART Board™ interactive whiteboard, and then ask the students to explore the idea

in detail using the SMART Table.

How your SMART Table works

Your SMART Table contains five main components:

•Computer

•Projector

• Speakers

•Camera

•Surface

The computer runs the SMART Table software, the projector projects the computer’s

display onto the surface, the speakers play the computer’s audio and the camera

detects students’ touch on the surface. Combined, these components allow students

to interact with SMART Table software.

The computer, projector, speakers and camera are inside the SMART Table’s cabinet,

while the surface is on the SMART Table’s top. The UPS provides backup power to

the computer if power is unexpectedly disconnected from the SMART Table, allowing

the computer to shut down safely.

Your SMART Table uses DViT™ (Digital Vision Touch) technology to detect multiple

students’ touches. Other SMART products use DViT technology, including select

SMART Board interactive whiteboards, SMART Board interactive displays and

SMART Podium™ interactive pen displays.

Andere Handbücher für Table 230i

Inhaltsverzeichnis

Andere SMART Touchscreen Handbücher

SMART

SMART Sympodium ID350 Bedienungsanleitung

Beliebte Touchscreen Handbücher anderer Marken

FlowLine

FlowLine Data loop Bedienungsanleitung

ALPEX

ALPEX AEx-8 P Series Bedienungsanleitung

Ltech

Ltech E5S Bedienungsanleitung

Harman

Harman AMX MODERO S MSD-701-L2 Bedienungsanleitung

Acnodes

Acnodes PC 1150 Bedienungsanleitung

AIS

AIS IP10IA99 series Bedienungsanleitung

IBASE Technology

IBASE Technology ASTUT-152-RE1S Bedienungsanleitung

YASKAWA

YASKAWA TP 610C Bedienungsanleitung

B&R

B&R Power Panel C Series Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 control Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT321W-521 Bedienungsanleitung

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Bedienungsanleitung

Qomo

Qomo QIT1386 Bedienungsanleitung

DFI

DFI KS104-CD Bedienungsanleitung

AMX

AMX AXP-PPC Leitfaden

Sartorius

Sartorius X3 PR 5410 Bedienungsanleitung

AMX

AMX Modero X Series Bedienungsanleitung

Advantech

Advantech TPC-30 Series Bedienungsanleitung