Smarter FridgeCam Bedienungsanleitung
FridgeCamTM
Guide
Get the app at smarter.am/app or search
‘Smarter 3.0’ on the app store. Available on
iOS and Android.
Follow the in-app instructions to set up
your FridgeCam.
For support, go to
www.smarter.am/troubleshooting
To charge, remove the camera from
the fridge and connect to power
with the USB cable provided.
During charging, the green LED will
remain lit. Ensure you fully charge
the FridgeCam before rst use with a
wall adapter plug.
Charging
When the battery is fully charged,
the green LED will turn o.
After charging, place back in the
fridge in the same mount position,
close the door and tap the“reset
after charging” button in the app
settings.
Ready to use
All Rights Reserved. Smarter Applications Ltd 2017. Due to continuous product improvement,
illustrations and instructions are subject to change.
If the product is not set up or
looking for WiFi credentials,
you may see the amber light.
It is normal to see during rst
installation and also when the
camera is initialising for a brief
moment.
Searching for WiFi
The red light indicates that the
FridgeCam is attempting to
re-connect to your WiFi router,
if this light is on continuously,
try moving the router closer to
the fridge and ensure your wi
details are correct.
WiFi not congured
After a successful set up to
your router and internet, the
FridgeCam will light green
indicating a connection.
Connected to WiFi Mounting the FridgeCam correctly is key to getting an optimal
view of your fridge.
Follow the in-app guide and video tutorials before tting your
FridgeCam or go to www.smarter.am/support to nd out more.
Fitting your FridgeCam
When the FridgeCam is in use in your fridge, some of
these lights may appear each time you open and close
your fridge door whilst its connecting, this is normal.
If you do not see new pictures of your fridge on your
app, please check the connection light status using this
guide to ensure it has an internet connection.
Quick setup
guide.
Before setting up, charge
the FridgeCam for up to 6
hours using the USB cable
provided in the box using
a standard smartphone
USB wall outlet power
adapter rated 5V 2A.
1. Charge your
FridgeCam
Follow
the steps.
For support, email us at
support@smarter.am or give
us a call. Lines are open
Monday to Friday 10am-
7pm GMT
EU Support line
0800 802 1237
US support line
+1 (855) 489 5522
In the box
FridgeCam
Universal mount
Charging cable
Spare mounting tape
Surface cleaning wipe
Reset pin
Search‘Smarter 3.0’on
your app store to
download the correct
Smarter app or visit our
website.
www.smarter.am/android
www.smarter.am/ios
2. Download
the app
Before mounting your
FridgeCam into your
fridge, follow the in-app
steps to connect it to your
wi router and tutorials
to mount the camera in
its optimal position.
3. Follow the
in-app steps
Having issues setting up or wish to return your product?
Please give us a call or contact us online before taking this
product back to the store.
www.smarter.am/support
IMPORTANT PRODUCT + SAFETY INSTRUCTIONS
IMPORTANT MODE D’EMPLOI DU PRODUIT + LES INSTRUCTIONS
RELATIVES A LA SÉCURITÉ
MODEL SFC01
WARNING
Important Product and Safety Instructions
For more detailed information about camera features and settings, download the user
manual for the product online at smarter.am/help.
• Always ensure that when the camera is in use or in the Fridge, that the housing is fully
closed and all seals including the Micro USB cover is closed and sealed.
Observe proper precautions when handling batteries. Batteries may leak or explode if
improperly handled.
Observe the following precautions to avoid a camera explosion or re:
• Do not drop, disassemble, open, crush, bend, deform, puncture, shred, microwave,
incinerate or paint the camera.
• Do not insert foreign objects into any opening on the camera, such as the USB port.
• Do not use the camera if it has been damaged—for example, if cracked, punctured
or harmed by water. Disassembling or puncturing the battery (whether integrated or
removable) can cause an explosion or re.
• Do not dry the camera or battery with an external heat source such as a microwave
oven or hair dryer.
• Do not directly pour water on the product or submerge in water.
• Store the camera out of reach of children and infants.
• Do not use organic solvents such as alcohol, benzine, or thinners to clean the product.
WARNING: Do not place naked ame sources, such as lighted candles, on or near the
product.
When charging the camera, do not handle the plug or charger with wet hands. Failure to
observe this precaution could result in electric shock.
Using a wall charger other than a Smarter Wall Charger can damage the camera battery and
could result in re or leakage. Only use chargers marked: Output 5V 2A. If you do not know
the voltage and current of your charger, use the included USB cable to charge the camera
from your computer.
CAUTION: When using the product near another device, read that device’s user guide for
any safety instructions. To limit potential interference with other digital transceivers. Power
your camera owhenever it is forbidden to use it or when it may cause interference. Do not
block any ventilation holes on the camera as the heat generated may hurt you and damage
the apparatus.
NOTICES: Avoid exposing your camera or battery to very cold or very hot temperatures.
Low or high temperature conditions may temporarily shorten the battery life or cause the
camera to temporarily stop working properly. Avoid dramatic changes in temperature or
humidity when using the camera or remote control, as condensation may form on or within
the product.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Clean only with a dry cloth.
6. Do not block any ventilation openings.
7. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus that produce heat.
8. Protect the power cord from being walked on or pinched particularly at plugs, conveni-
ence receptacles, and the point where they exit from the apparatus during charge.
9. Only use attachments/accessories and mounts specied by the manufacturer.
10. Unplug this apparatus during lightning storms or when unused for long periods of time.
11. Refer all servicing to qualied services personnel. Servicing is required when the
apparatus has been damaged in any way, such as when the plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, or the apparatus does not operate
normally or has been dropped.
Battery Warnings
WARNING: The battery pack shall not be exposed to excessive heat such as sunshine, re or
the like.
• Do not remove the battery from its housing or dismantle the housing.
• Do not dismantle, open or shred battery pack or cells.
• Do not replace the battery.
• Only use the supplied and pre-tted battery in the camera.
• Do not expose batteries or a battery pack to heat or re. Avoid storage in
direct sunlight.
• Do not short-circuit the battery. Do not store batteries in a box or drawer where they
may short-circuit each other or be short-circuited by other metal objects.
• Do not subject batteries or the camera to mechanical shock.
• In the event of a battery leaking, do not allow the liquid to come in contact with the
skin or eyes. If contact has been made, wash the aected area with copious amounts
of water and seek medical advice.
• Do not use any charger other than that specically provided for use with
the equipment.
• Do not use any battery pack or cell which is not designed for use with the product.
• Do not mix cells of dierent manufacture, capacity, size or type within a device.
• Keep batteries out of the reach of children.
• Seek medical advice immediately if a battery has been swallowed.
• Keep batteries clean and dry.
• Batteries need to be charged before use. Always use the correct charger and refer to
the manufacturer’s instructions or equipment manual for proper charging instructions.
• Do not leave a battery on prolonged charge when not in use.
• After extended periods of storage, it may be necessary to charge and discharge the batter-
ies several times to obtain maximum performance.
• Batteries give their best performance when they are operated at normal room temperature
68°F (20°C) ± 9°F (5°C).
• Use the battery only in the application for which it was intended.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Sprachen:
