Smartwares RM218 Bedienungsanleitung

Users m anual 4 - 140

Gebruikershandleiding 27 - 37

Gebrauchsanweisung 15 - 26

Mode d’emploi 38 - 48

Manual de usuario 60 - 70

Instrukcja obsługi 49 - 59

RM218 - 10.006.74

-1-

LED

1Activat e - Ak tivier en - Activa r = 5 sec.

Test - Prüfung - Prueba = 1x

-2-

Lock - Fixierstift

Fijación pin

-3-

Test - Prüfung - Prueba

Entree

5 0 cm

MI NI MUM EXTRA

100cm

GROUND/ ERDGESCHOSS/ BEGANEGROND/ Pr.ETAGE/ PARTER/ PLANTA BAJA

ATTI C/ BODEN/ ZOLDER/ MANSARD/ PODDASZE/ ÁTI CO

-4-

I MPORTAN T I NFORMATI ON

1. Gener al product inform at ion:

The smoke alarm device, if properly installed and m aintained,

sounds the alarm at an early stage of the fire. This can give

you those extra valuable seconds to evacuate your home and

call the fire departm ent. The sm oke alarm device works with

an 3V lithium battery. Under norm al conditions the service life

of the battery is up t o 10 years. When the battery is (almost)

empty, the smoke detector indicates this by an audible “beep”.

This indicator sounds every 30-40 seconds during minim um 30

days. End of life, replace com plete smoke alarm device!

2. M ake/ m odel num ber: Smartwares RM218

3. Pow er supply: 3V DC CR123A Lithium

(not replaceable battery)

4. Certificat ion m arks:

5. Scope of application: Smoke alarm device for buildings with

residential function.

GB SMOKE ALARM DEVI CE

0786

RM218-001CPR

EN14604:2005/AC:2008

Smartwares RM218 G214064

-5-

6. Function: Gives a warning when smoke caused by a fire is

detected.

7. Description: Smoke alarm device based on the photocell

principle, which means that the alarm m onitors the air for

sm oke caused by fire. smoke alarm device does not detect

heat, gas or fire.

8. Advice: Keep these inst ructions in a safe,

easily accessible place.

9. Caution: The alarm is designed in order to detect smoke; it

cannot prevent a fire.

10.Caut ion: The sm oke alarm device should not be painted.

Protect the smoke alarm device from dust during renovation

work.

11.Caut ion: The sm oke alarm device should not be

taped/ covered (this causes loss of functionality).

12.Caut ion: Keep the sm oke alarm device out of the reach of

children.

Press test button (1) and hold it for above 5 seconds until LED

lights, and release it within 1 second, the unit will generate a

“beep” indicates that it is activated and goes into work status.

CAUTI ON: Activate sm oke alarm first or else there is no function

for this unit.

Test the unit to ensure proper operation by pressing the test

button, this will sound the alarm if the electronic circuitry, horn,

and battery are working. I f no alarm sounds, t here is a defective

battery or other failure.

ACTI VATI ON

TESTI NG

-6-

NOTE: WEEKLY TESTI NG I S REQUIERED

DO N OT: Use an open flam e to test your alarm , you could

dam age t he alarm or ignite combustible m aterials and st art a fire.

CAUTI ON: Due t o the loudness (85 decibels) of the alarm .

Always stand an arm s-length always from the unit when testing.

Test the alarm weekly to ensure proper operation. Erratic or low

sound com ing from your alarm m ay indicate a defect ive alarm .

1. What is the best place to m ount a smoke alarm device

* In the m iddle of the ceiling but at least 50cm from every edge.

* At least one on each floor.

* In every bedroom .

* In the hallway and stairwell.

* On the landing.

* In the living room.

* In the storage room or rooms with electrical appliances.

2. The alarm should not be installed in:

* A space where the temperature can drop below 4

and above 40° C

* In hum id areas.

* Right next to doors or windows and not near a fan or radiator.

Do not install sm oke alarm device on the W all !

I NSTALATI ON

-7-

Do not install the alarm in a place with difficult access, which could

make it difficult to operate the test button and m aintenance. The

alarm can be installed quickly and easily. I nstall the base plate on the

selected locat ion using the provided screws.

3. Mount ing

* Take the fixation pin out of the ground plate

* Screw the m ounting plate with 2 screws on the celling

* Activate the sm oke alarm device before m ounting

* Fix t he smoke alarm device on t he m ounting plate by turning,

till you hear a “click”

* Put the fixation pin in the hole

* Test the smoke alarm device by pushing t he test butt on

4. Caution

* Do not cover the smoke alarm device with tape! When SMOKE

is detected, you will hear a loud intermittent sound (85dB) .

5. Recommendation

* Increase the detection area by installing several smoke alarm

devices

During the smoke alarm is alarm ing, you push the test button, it will

be paused t he smoke alarm alarm ing for approx. 10 m inutes. The

red LED will flash every 8 seconds, it indicates the sm oke alarm

device is running into the hush mode. > > >

ALARM SI LEN CE ( hush m ode)

-8-

Sm oke alarm devices are designed to m inim ize nuisance alarm s.

Com bustion particles from cooking may set off the alarm if the alarm

is located close to the cooking area. Large quantities of combust ible

particles are generated from spills or when grilling/ frying. Using the

fan on a range hood that vents to outside (non- recirculating type)

will also help rem ove these combustible particles from the kitchen.

The alarm silence (test but ton) is extrem ely useful in a kitchen area

or other areas prone to nuisance. The hush feature is to be used only

when a known alarm condit ion, such as sm oke from cooking

activates the alarm . The sm oke alarm device is desensitized by push

the alarm silence ( hush mode) on t he sm oke alarm device cover, if

the smoke is not too dense, the alarm will silence to indicat e that t he

alarm is in a t em porarily desensitized condition. The smoke alarm

device will autom atically reset after approxim ately 10 minutes, if

after this period, particles of com bustion are still present, the alarm

will sound again. The alarm silencer (hush m ode) can be repeatedly

until the air has been cleared of the condition causing t he alarm .

NOTE: Dense sm oke will override the alarm silencer and sound a

continuous alarm , the smoke alarm goes back to norm al work

status from hush m ode

CAUTI ON: Before using the alarm silence (hush), identify the

source of the sm oke and be certain a safe condition exists.

-9-

PREVENTI VE MAI NTENAN CE

I MPORTAN T I NSTRUCTI ONS I N CASE OF FI RE ALARM

Testing

The smoke alarm device is provided with a test button. Push it in

until the alarm sounds. The signal stops when the button is

released. Test the alarm at least once a week.

Cleaning

For the best perform ance, the smoke alarm device must be

dusted once a month and vacuum ed every 6 m onths. Remove the

detector from t he ceiling plate and carefully vacuum t he detector.

Do not touch the inside with the nozzle of the vacuum cleaner.

Then test t he alarm .

Caution : The smoke detector loses it s effect iveness if it is

covered.

W arning : The smoke alarm device should not be painted /

taped. Do not test the smoke alarm device with

candles, flames, cigarettes, etc.

A sm oke alarm device is part of your fire protection t ogether with fire

extinguishers, escape ladders, ropes as well as your choice of

building materials during renovations. Also make sure t hat there is

an escape route; discuss t his with your children, make sure any room

can be evacuated without opening the door, > > >

Andere Handbücher für RM218

Inhaltsverzeichnis

Sprachen:

Andere Smartwares Rauchmelder Handbücher

Smartwares

Smartwares FSM-114 Bedienungsanleitung

Smartwares

Smartwares RM220 Bedienungsanleitung

Smartwares

Smartwares RM174RF Bedienungsanleitung

Smartwares

Smartwares RM218 Bedienungsanleitung

Smartwares

Smartwares RM149H Bedienungsanleitung

Smartwares

Smartwares FSM-121 Bedienungsanleitung

Smartwares

Smartwares RM149 Bedienungsanleitung

Smartwares

Smartwares RM520 Bedienungsanleitung

Smartwares

Smartwares SH8-90126 Bedienungsanleitung

Smartwares

Smartwares FSM-123 Bedienungsanleitung

Smartwares

Smartwares RM520 Bedienungsanleitung

Smartwares

Smartwares RM250 Bedienungsanleitung

Smartwares

Smartwares FSM-114 Bedienungsanleitung

Smartwares

Smartwares ELRO RM142F Bedienungsanleitung

Smartwares

Smartwares RM520 Bedienungsanleitung

Smartwares

Smartwares RM520 Bedienungsanleitung

Smartwares

Smartwares RM149A Bedienungsanleitung

Smartwares

Smartwares RM620 Bedienungsanleitung

Smartwares

Smartwares FSM-127 Bedienungsanleitung

Smartwares

Smartwares FSM-127 Bedienungsanleitung

Smartwares

Smartwares 10.006.74 Bedienungsanleitung

Smartwares

Smartwares FSM-126 Bedienungsanleitung

Smartwares

Smartwares RM620 Bedienungsanleitung

Beliebte Rauchmelder Handbücher anderer Marken

x-sense

x-sense SD19-W Bedienungsanleitung

FireAngel

FireAngel Thermoptek ST-622 Bedienungsanleitung

teko

teko Astra-42A Bedienungsanleitung

Siemens

Siemens PE-11C Bedienungsanleitung

System Sensor

System Sensor DH500ACDC Bedienungsanleitung

Resolution Products

Resolution Products RE612 CryptiX Bedienungsanleitung

First Alert

First Alert PC900V Bedienungsanleitung

Eminent

Eminent EM6590 E-Domotica Bedienungsanleitung

Ei Electronics

Ei Electronics Ei Ei168RC Bedienungsanleitung

Carrier

Carrier Kidde Quell Q301 Bedienungsanleitung

VESDA

VESDA VLF-500 Bedienungsanleitung

ELRO

ELRO FS8110 Bedienungsanleitung

Heiman

Heiman SMOKI NS-626PHS Bedienungsanleitung

Family Gard

Family Gard FG225 Bedienungsanleitung

Regin

Regin SDD-S65 Bedienungsanleitung

Aparton

Aparton ASD-10 Bedienungsanleitung

Greystone

Greystone DSD120 Bedienungsanleitung

LST

LST ÜMS-55000-841 Bedienungsanleitung