SMC Networks SMC EZ Connect Turbo SMC2402W Bedienungsanleitung

11/22Mbps Wireless

CardBus / PCI Adapters

User Guide

SMC2435W & SMC2402W

V2.0

The EZ Connect TURBO Cards are IEEE 802.11b - compliant 11/22

Mbps auto-sensing wireless network adapters. They meet the needs of

small business and corporate users who require backwards

compatibility with a 11 Mbps wireless connection to an existing LAN.

In addition, they provide exceptional scalability to 22 Mbps through

the use of Packet Binary Convolutional Code (PBCC) technology.

These new adapters feature an operating range of up to 1,155 feet

and true plug-and play installation in all notebook computers.

System Requirements

• SMC2435W: Available Cardbus PCMCIA Type II slot

• SMC2402W: Available PCI Bus-Master slot

• Windows 98/Me/2000/XP

• Minimum of 1 MB available hard disk space for utility and driver

installation

• Another IEEE 802.11b compliant device installed in your network,

such as the SMC2404WBR Barricade Turbo Wireless Cable/DSL

Broadband Router, or another PC with a wireless adapter, such as

the SMC2662W EZ Connect Wireless USB Adapter.

Equipment Checklist

After unpacking the EZ Connect TURBO 11/22 Mbps Auto-Sensing

Wireless Adapter, check the contents of the box to be sure you have

received the following components:

• 1 Wireless Cardbus Adapter (SMC2435W) or 1 Wireless PCI Card

(SMC2402W)

• 1 Driver, Utility, & Documentation CD

•Manual

Immediately inform your dealer in the event of any incorrect,

missing or damaged parts. If possible, please retain the carton

and original packing materials in case there is a need to return

the product. The EZ Connect TURBO Wireless Adapters are

covered by a limited lifetime warranty.

SMC2435W: Installation Instructions

Warning:

• Network cards are sensitive to static electricity. To protect the

card, avoid touching its electrical components and always touch

the metal chassis of your computer before handling the card

1) Turn on your computer and insert the Driver, Utility, and

Documentation CD. Run the utility software and then reboot when

requested.

2) Find an available Cardbus slot in your computer.

3)With the SMC2435W Wireless Cardbus Adapters 68-pin

connector facing the Cardbus slot, and the “EZ Connect

TURBO”label facing up, slide the card completely into the

Cardbus slot as shown below:

4) For Windows 98/Me/2000, Cardbus specification is required. Please

check the documents for your Cardbus adapter driver before

installing the software driver for the EZ Connect TURBO Wireless

Cardbus Adapter.

English

1 2

Driver Installation Option #1 (Recommended)

Windows 98/Me/2000/XP

NOTE: Installation processes such as these usually require the use of

your original, licensed copy of Windows. Please have your Windows

CD on hand BEFORE proceeding with the installation.

This Installation method makes the process as simple and Plug-and-

Play as possible. Simply run the driver/utility program, reboot your

machine and insert your EZ Connect TURBO Wireless Card. It's as easy

as 1-2-3.

Step 1: Insert the Driver, Utility and Documentation CD.

Step 2: Click [Start], click [Run] and type [?:\Utility\setup.exe]

(Note: The ? equals the letter of your CD-ROM drive. In most cases,

this is D.)

Step 3: The installation wizard will begin.

Step 4: Click [Next >] to continue.

English

5) The card will be automatically installed upon insertion. Once

complete, you may take advantage of the wireless functionality

this adapter has to offer.

SMC2402W: Installation Instructions

1) Turn on your computer and insert the Driver, Utility, and

Documentation CD. Run the utility software and then reboot when

requested.

2) Switch off the computer, unplug the power cord, and remove the

computer's cover. Select an unused PCI bus-master slot and remove

its protective bracket.

3) Carefully insert the card and press until all edge connectors are

firmly seated inside the slot. Then, screw the card's bracket

securely into the PC's chassis and put the computer's cover back in

place.

4) Boot up the machine.

5) The card will be automatically installed during the Operating

System's boot-up process. Once complete, you may take advantage

of the wireless functionality this adapter has to offer.

3 4

Step 5: You will be given the option to choose the location where

the Configuration Utility will be installed. It is recommended to leave

this at the default value. Click [Next >] to continue.

Step 6: Please set the selection to [Yes] and click [Finish] to reboot

the machine. Then shut down the computer, insert your EZ Connect

TURBO Cardbus Adapter or PCI Wireless Card, and boot up your

machine again.

Step 7: Once the OS is booted up, it will find the new hardware and

automatically install it.

The following are OS specific options that may appear during this

installation procedure:

Windows 98: If you are using Windows 98, you must have your

original Windows CD on hand. The system will request it near the end

of the installation process.

Windows Me: The installation process is fully Plug-and-Play. You will

be asked to reboot when the process is complete.

Windows 2000: Click [Yes] if asked to continue the installation

with-out a Digital Signature.

Windows XP: Select [Install the software automatically] if asked and

click [Next] to complete the installation. Click [Continue Anyway] if a

Logo testing window appears.

Continue to the Utility Configuration section for documentation on

how to use the utility application for your adapter.

Driver Installation Option #2

Click on the icon for your OS to view the directions:

Note: Windows 98, Me, 2000 and XP are registered trademarks of

Microsoft.

English

5 6

Windows 98 - Driver Installation

NOTE: Installation processes such as these usually require the use of

your original, licensed copy of Windows. Please have your Windows

CD on hand BEFORE proceeding with the installation.

Step 1: After you have inserted the EZ Connect TURBO 11/22 Mbps

Auto-Sensing Wireless Card in your machine, the OS will

automatically recognize the adapter and prompt you for the

appropriate drivers. Click the [Next >] button to begin the

installation.

Step 2: Insert the Driver CD and select the [Search for the best driver

for your device] option and click [Next >].

Step 3: Clear all checkboxes except for [Specify a location:]. Then

press the [Browse] button and look for the drivers on your CD-ROM.

Browse to ?:\Driver. (Note: The "?" equals the letter of your CD-ROM

drive. In most cases, this is D.)

Step 4: The system should find the drivers. Now click the [Next >]

but-ton to continue the installation. The wizard will show

"SMC2402W 22Mbps Wireless PCI Adapter" if you purchased the PCI

Card or "SMC2435W 22Mbps Wireless Cardbus Adapter" if you

purchased the Cardbus Adapter.

(Note: If the system could not find the drivers, click the [< Back]

but-ton, and select the [Display a list of all the drivers...] option.

Select [Network Adapters] from the list of devices, press [Have Disk]

and once again browse to the location of the drivers)

English

7 8

English

Step 5: Once the system has copied the SMC drivers from the CD, it

may then request files from your original Windows disk. Please insert

the Windows CD at this time.

Step 6: The system will copy the files. Do NOT press [Cancel].

Step 7: Once all the necessary files are copied from the Windows

disk, the driver install process will be complete. Click [Finish] to exit

the wizard.

Step 8: You will then be prompted to reboot the machine. Please

press [Yes]. Upon reboot, the EZ Connect TURBO Wireless Card will be

initialized and ready for use.

Windows Me - Driver Installation

NOTE: Installation processes such as these usually require the use of

your original, licensed copy of Windows. Please have your Windows CD

on hand BEFORE proceeding with the installation.

Step 1: After you have inserted the EZ Connect TURBO Wireless Card in

your machine and turned it back on, the OS will automatically

recognize the adapter and prompt you for the appropriate drivers.

Select the [Specify the location of the driver] option. Then click the

[Next >] button to begin the installation.

Step 2: Insert the Driver CD and select the [Specify a location:]

option. Clear the [Removable Media] checkbox. Then press the

[Browse] button and look for the drivers on your CD. This should be

located in ?:\Driver. (Note: The ? equals the letter of your CD-ROM

drive. In most cases, this is D.) Then click [Next >].

910

English

Step 3: The system should find the drivers. Now click the [Next >]

button to continue the installation. The wizard will show "SMC2402W

22Mbps Wireless PCI Adapter" if you purchased the PCI Card or

"SMC2435W 22Mbps Wireless Cardbus Adapter" if you purchased the

Cardbus Adapter.

(Note: If the system could not find the drivers, click the [< Back]

but-ton, and select the [Display a list of all the drivers] option.

Select [Network Adapters] from the list of devices, press [Have Disk]

and once again browse to the location of the drivers)

Step 4: Once all the necessary files have been copied, the driver

installation is complete. Click [Finish] to exit the wizard.

Step 5: You will then be prompted to reboot the machine.

Please press [Yes]. Upon reboot, the EZ Connect TURBO Wireless

Card will be initialized and ready for use.

Windows 2000 - Driver Installation

Step 1: After you have inserted the EZ Connect TURBO Wireless

Card in your machine and turned it back on, the OS will

automatically rec-ognize the adapter and prompt you for the

appropriate drivers. Click the [Next >] button to begin the

installation.

Step 2: Insert the Driver CD and select the [Search for a

suitable driver...] option. Then click [Next >].

Step 3: Clear all checkboxes except for [Specify a location].

Then click [Next >].

11 12

Step 4: You will then be prompted to enter the location of the

driv-ers. This should be ?:\Driver. (Note: The ? equals the letter

of your CD-ROM drive. In most cases, this is D.) Then click [OK].

You can also click Browse] and browse to the location of the

drivers on the CD for fur-ther verification.

Step 5: The system should find the drivers. Now click the [Next

>] button to continue the installation. (Note: If the system

could not find the drivers, click the [< Back] button, and select

the [Display a list of the known drivers...] option. Select

[Network Adapters] from the list of devices, press [Have Disk]

and once again browse to the location of the drivers)

Step 6: Click [Yes] to continue the installation. Please do NOT click

[No] as this will cancel the driver wizard and the card will not be

installed properly. The wizard will show "SMC2402W 22Mbps Wireless

PCI Adapter" if you purchased the PCI card or "SMC2435W 22Mbps

Wireless Cardbus Adapter" if you purchased the Cardbus Adapter.

Step 7: You have now completed the driver installation. Click [Finish]

to initialize the adapter.

English

13 14

Windows XP - Driver Installation

Step 1: After you have inserted the EZ Connect TURBO Wireless

Card in your machine and turned it back on, the OS will

automatically rec-ognize the adapter and prompt you for the

appropriate drivers. Click the [Next >] button to begin the

installation.

Step 2: Insert the Driver CD and check the [Include this

location in the search] option. Make sure the [Search removable

media] option is not checked. Click [Browse] and find the

location of the drivers. This should be ?:\Driver. (Note: The ?

equals the letter of your CD-ROM drive. In most cases, this is D.)

Then click [Next >].

Step 3: Click [Continue Anyway] to continue the installation.

Please do NOT click [STOP Installation] as this will cancel the

driver wizard and the card will not be installed properly. The

wizard will show "SMC2402W 22Mbps Wireless PCI Adapter" if

you purchased the PCI card or "SMC2435W 22Mbps Wireless

Cardbus Adapter" if you pur-chased the Cardbus Adapter.

Step 4: This process will be completed once the drivers are

copied to the hard drive and installed. Please click [Finish] to

exit the wizard.

After clicking [Finish], you will see the following message in

your system tray:

English

15 16

How Do I Know the Card is Installed?

This section will help you verify that the adapter is installed

properly. Click on the icon for your OS to view the directions:

Note: Windows 98, Me, 2000 and XP are registered trademarks of

Microsoft.

Windows 98 - Verification

Step 1: Right-click the My Computer icon on your desktop and click

[Properties].

Step 2: Then go to the [Device Manager] tab and open the [Network

adapters] section. You should see your EZ Connect TURBO Wireless

Adapter in this menu. Highlight it and click [Properties].

Step 3: The Device Status shows that the "This device is

working properly". If there are any error messages displayed

here, you will need to click the SMC adapter and click [Remove].

Then reboot the machine and go through the installation process

again.

Windows Me - Verification

Step 1: Right-click the My Computer icon on your desktop and

click [Properties].

Step 2: Then go to the [Device Manager] tab and open the

[Network adapters] section. You should see your EZ Connect

TURBO Wireless Adapter in this menu. Highlight it and click

[Properties].

Step 3: The Device Status shows that the "This device is

working properly". If there are any error messages displayed

here, you will need to click the SMC adapter and click [Remove].

Then reboot the machine and go through the installation process

again.

English

17 18

Andere Handbücher für SMC EZ Connect Turbo SMC2402W

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere SMC Networks Adapter Handbücher

SMC Networks

SMC Networks SMCWCB-N Bedienungsanleitung

SMC Networks

SMC Networks 2209USB/ETH Bedienungsanleitung

SMC Networks

SMC Networks 2870W - annexe 1 Bedienungsanleitung

SMC Networks

SMC Networks SMCWAA-B Bedienungsanleitung

SMC Networks

SMC Networks WUSBS-N2 FICHE Bedienungsanleitung

SMC Networks

SMC Networks EZ Connect SMC2635W Bedienungsanleitung

SMC Networks

SMC Networks EZ Networking SMC2209USB/ETH Bedienungsanleitung

SMC Networks

SMC Networks HP1D-USB - annexe 1 Bedienungsanleitung

SMC Networks

SMC Networks WCB-G2 FICHE Installationsanleitung

SMC Networks

SMC Networks EZ Connect SMC2635W Bedienungsanleitung

SMC Networks

SMC Networks SMCWAA-G Bedienungsanleitung

SMC Networks

SMC Networks SMCWUSBT-G Bedienungsanleitung

SMC Networks

SMC Networks 2635W Bedienungsanleitung

SMC Networks

SMC Networks 2670W Bedienungsanleitung

SMC Networks

SMC Networks SMCWCBT-G Bedienungsanleitung

SMC Networks

SMC Networks 2671W Bedienungsanleitung

SMC Networks

SMC Networks SMCWAPS-G Bedienungsanleitung

SMC Networks

SMC Networks HPAV-ESW - FICHE TECHNIQUE Bedienungs- und Sicherheitshinweise

SMC Networks

SMC Networks EZ Connect SMC2602W Bedienungsanleitung

SMC Networks

SMC Networks EZ Connect Powerline SMCHPAV-ETH Bedienungsanleitung

SMC Networks

SMC Networks 2862W-G Bedienungsanleitung

SMC Networks

SMC Networks SMC2862W-G EZ Connect Bedienungsanleitung

SMC Networks

SMC Networks SMC2336W-AG Bedienungsanleitung

SMC Networks

SMC Networks EZ Connect Powerline SMCHPAV-ETH2 Bedienungs- und Sicherheitshinweise

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

RCA

RCA AH57R Bedienungsanleitung