SMC Networks Barricade Cable/DSL Router Bedienungsanleitung

Cable/DSL Router

User Guide

The information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and

reliable. However, no responsibility is assumed by SMC for its use, nor for any

infringements of patents or other rights of third parties which may result from its use. No

license is granted by implication or otherwise under any patent or patent rights of SMC.

SMC reserves the right to change specifications at any time without notice.

SMC Networks, Inc.

6 Hughes, Irvine, CA 92618

-1-

Trademarks:

SMC is a registered trademark; and Barricade is a registered trademark of SMC Networks,

Inc. Other products and company names are trademarks or registered trademarks of their

respective holders.

FCC Interference Statement:

This equipment has been tested and found to comply with the limits for a Class B digital

devicepursuanttoPart15oftheFCCrules.These limits are designed to provide reasonable

protection against radio interference in a commercial environment. This equipment can

generate, use and radiate radio frequency energy and, if not installed and used in accordance

with the instructions in this manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause

interference, in which case the user, at his own expense, will be required to take whatever

measures are necessary to correct the interference.

CE Declaration of Conformity:

This equipment complies with the requirements relating to electromagnetic compatibility,

EN55022/A1ClassB,andEN50082-1. This meets the essential protection requirements of

the European Council Directive 89/336/EEC on the approximation of the laws of the

member states in relation to electromagnetic compatibility.

-2-

Table of Contents

Chapter 1 Introduction.................................................................................4

1.1 Functions and Features...................................................................4

1.2 Packing List....................................................................................5

Chapter 2 Hardware Installation..................................................................6

2.1 Panel Layout...................................................................................6

2.2 Installation Requirements...............................................................7

2.3 Procedure for Hardware Installation ..............................................8

Chapter 3 Network Settings and Software Installation.............................10

3.1 Setting your computer network settings properly........................10

3.2 Install the Software into Your Computers ....................................11

Chapter 4 Configuring the Barricade........................................................14

4.1 Startup and Log in........................................................................14

4.2 Status ............................................................................................15

4.3 Toolbox.........................................................................................16

4.4 Primary Setup ...............................................................................17

4.5 DHCP Server................................................................................19

4.6 Virtual Server................................................................................20

4.7 Special AP....................................................................................21

4.8 Access Control..............................................................................22

4.9 Miscellaneous Items .....................................................................23

Chapter 5 Print Server................................................................................24

5.1 Configuring on Windows 95/98 Platforms...................................24

5.2 Configuring on Windows NT Platforms.......................................26

5.3 Configuring on Windows 2000 Platforms ....................................27

-3-

5.4 Configuring on Unix based Platforms ..........................................27

Appendix A: Console Mode......................................................................28

Appendix B: TCP/IP Configuration for Windows 95/98 ..........................29

B.1 Installing TCP/IP protocol into your PC......................................29

B.2 Setting TCP/IP protocol to work with the Barricade...................30

Appendix C: Installation Guide For Specific ISP .....................................38

C.1 @Home........................................................................................38

C.2 MediaOne ....................................................................................39

-4-

Chapter 1 Introduction

Congratulations on your purchase of the Barricade. The Barricade is specifically designed

for small office and home office needs. It provides a complete SOHO solution for Internet

surfing and for sharing office resources. Step-by-step instructions make installation easy.

Before installing and using the Barricade, please take the time to read this manual for

complete operating information.

1.1 Functions and Features

lBroadband modem and IP sharing

-connects multiple computers to a broadband (cable or DSL) modem or an

Ethernet router to surf the Internet.

lAuto-sensingEthernetSwitch

-equipped with a 7-port 10/100Mbps auto-sensing Ethernet switch.

lVPN supported

-supports multiple PPTP sessions and allows you to set up VPN server and VPN

clients.

lPrinter sharing

-embeds a print server to allow all of the networked computers to share one

printer.

lFirewall

-allunwantedpacketsfromoutsideintrudersareblockedtoprotectyourIntranet.

lDHCP server supported

-all of the networked computers can retrieve TCP/IP settings automatically from

the Barricade.

-5-

lWeb-based configuring

-configurablethroughanynetworkedcomputer’s web browser using Netscape or

Internet Explorer.

lAccess Control supported

-allows you to assign different access rights for different users.

lVirtual Server supported

-enables you to expose WWW, FTP and other services on your LAN to be

accessible to Internet users.

lUser-DefinableApplication Sensing Tunnel

-users can define the attributes to support the special applications requiring

multiple connections such as Internet gaming, video conferencing, Internet

telephony, et al. Then the Barricade can sense the application type and open a

multi-port tunnel for it.

lDMZ Host supported

-allows a networked computer to be fully exposed to the Internet; this function is

used whenthe specialapplicationsensingtunnelfeatureisinsufficient to allow an

application to function correctly.

1.2 Packing List

lBarricade Broadband Router

lInstallation CD

lPower adapter

lTwo CAT-5 UTP Ethernet cables

-6-

Chapter 2 Hardware Installation

2.1 PanelLayout

2.1.1. Front Panel

All LED indicators and RJ-45 connectors are allocated to the front panel.

WAN: the port where you will connect your cable (or DSL) modem or Ethernet router.

Port 1-7: the ports where you will connect networked computers and other devices.

LED indicators:

LEDs Function Color

Status Description

POWER

Powerindication

Green

On Power is being applied to the

Barricade.

On The WAN port is linked

WAN WAN port

activity Green

Blinking The WAN port is sending or

receiving data

On The LAN port is linked

LAN LAN port

activity Green

Blinking The LAN port is sending or

receiving data

M1 System status 1

Orange

Blinking The Barricade is functioning

properly

On The Barricade is working for a

specific service

M2 System status 2

Orange

Blinking

The Barricade is being configured

or upgraded. Don’t turn it off !

COM Serial port

activity Green

Blinking Data transfer is in progress

through COM port

-7-

COL Collision

indication Orange

On Transmission collisions have

occurred on the LAN

LOOP Loop indication

Orange

On Loop connection has been

detected

On The corresponding port is linked

Link/Act.

Link status Green

Blinking

The corresponding port is sending

or receiving data

100M 10/100M

indication Green

On The corresponding port is

transmitting or receiving data in

100Mbps.

FDX Full Duplex

indication Orange

On The corresponding port is

transmitting or receiving data in

full duplex mode.

2.1.2. Rear Panel

Ports Function Specification

POWER Inlet Power inlet AC 90V-230V/50-60Hz

COM

Serial port (connect analog

modem or console cable)

9-pins D-type male connector

PRINTER Printer port 25-pins D-type female connector

Power Switch Power on/off On/Off

2.2 Installation Requirements

The Barricade can be positioned at any convenient place in your office or home. No special

wiringorcooling requirements are needed. You should, however comply with the following

-8-

guidelines:

lPlace product on a flat horizontal plane.

lKeep product away from any heating devices.

lDo not place product in a dusty or wet environment.

The recommended operational specifications of the Barricade are:

Temperature 0 oC ~ 55 oC

Humidity 5 % ~ 90 %

You should also remember to turn off the power, remove the power cord from the outlet, and

keep your hands dry when you install the hardware.

2.3 Procedure for Hardware Installation

1. Set-up LAN connection: connect an Ethernet cable from your computer’s Ethernet

port to one of the LAN ports of the Barricade.

2. Set-up WAN connection: connect the networkcable from your cable or DSL modem

to the WAN port of the Barricade.

-9-

3. Connecting the Barricade with other hubs:

In case you do not need to connect with another hub, skip this step.

If you want to connect the Barricade with another hub, connect one of the ports 1-7 to

that hub by crossover Ethernet cable. If the hub you connected has an UPLINK port,

you can also connect the Barricade with straight-through Ethernet cable to that

UPLINK port.

4. Connecting the Barricade with your printer: use the printer cable to connect your

printer to the printer port of the Barricade.

5. Power on:

Byconnecting the power cord to power inlet and turning the power switch on, the

Barricade will automatically enter the self-test phase. When it is in the self-test phase,

the indicatorsM1 and M2 will be lit ON for about 5 seconds, and then M1 and M2 will

be flashed 3 times to indicate that the self-test operation has finished. Finally, the M1

will be continuously flashed once per second toindicate that the Barricade is in normal

operation.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere SMC Networks Netzwerk-Router Handbücher

SMC Networks

SMC Networks SMC7901BRA5 Bedienungsanleitung

SMC Networks

SMC Networks Barricade SMCWBR14S-N Bedienungsanleitung

SMC Networks

SMC Networks TigerAccess SMC7824M/VSW Installationsanleitung

SMC Networks

SMC Networks GS501 Bedienungsanleitung

SMC Networks

SMC Networks SMCFS1601 - FICHE TECHNIQUE Bedienungsanleitung

SMC Networks

SMC Networks SMCWBR14-3GN Bedienungsanleitung

SMC Networks

SMC Networks EZ Connect SMC2870W Bedienungsanleitung

SMC Networks

SMC Networks SMCGS10C-Smart Bedienungsanleitung

SMC Networks

SMC Networks FS1601 Bedienungsanleitung

SMC Networks

SMC Networks SMCGS10P-Smart Bedienungsanleitung

SMC Networks

SMC Networks ADSL2 Barricade SMC7904BRA3 Bedienungs- und Sicherheitshinweise

SMC Networks

SMC Networks SMC6752AL2 Programmierhandbuch

SMC Networks

SMC Networks 7901WBRA2 FICHE Bedienungsanleitung

SMC Networks

SMC Networks Barricade Plus SMC7004FW Bedienungsanleitung

SMC Networks

SMC Networks Barricade SMC2804WBR38 Bedienungsanleitung

SMC Networks

SMC Networks FS1601 Bedienungsanleitung

SMC Networks

SMC Networks SMC6826MPE Bedienungsanleitung

SMC Networks

SMC Networks 6726AL2 FICHE Programmierhandbuch

SMC Networks

SMC Networks 7904WBRA-N FICHE Installationsanleitung

SMC Networks

SMC Networks 7301TA Bedienungsanleitung

SMC Networks

SMC Networks TigerSwitch 100 SMC6724L3 Bedienungsanleitung

SMC Networks

SMC Networks 7004VBR Bedienungsanleitung

SMC Networks

SMC Networks BR14VPN - annexe 1 Bedienungsanleitung

SMC Networks

SMC Networks 8708L2 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung