SMC Networks Barricade g SMC2804WBRP-G Bedienungsanleitung

Barricade g Wireless Router with USB Print Server Manual

Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable.

However, no responsibility is assumed by SMC for its use, nor for any infringements of patents or

other rights of third parties which may result from its use. No license is granted by implication or

otherwise under any patent or patent rights of SMC. SMC reserves the right to change specifications

at any time without notice.

SMC Networks, Inc.

38 Tesla

Irvine, CA 92618

Trademarks:

SMC is a registered trademark; and Barricade is a trademark of SMC Networks, Inc. Other product

and company names are trademarks or registered trademarks of their respective holders.

Barricade g Wireless Router with USB Print Server Manual

TABLE OF CONTENTS

CHAPTER 1 | Introduction

Features and Benefits

Package Contents

Minimum Requirements

CHAPTER 2 | Getting to know the Barricade g

LED Indicators

Resetting the Barricade g

CHAPTER 3 | Getting Connected

Basic Installation Procedure

3-click Installation Wizard

CHAPTER 4 | Configuring your Computer

Configuring Windows 95/98/Me

Configuring Windows 2000

Configuring Windows XP

Configuring a Macintosh Computer

CHAPTER 5 | Configuring the Barricade g

Browser Configuration

Disable Proxy Connection

Accessing the Barricade Management

CHAPTER 6 | Navigating the Web-based Administration

Making Configuration Changes

CHAPTER 7 | Setup Wizard

CHAPTER 8 | Advanced Setup

CHAPTER 9 | Setting up the Print Server

Install the SMC Printer Port Monitor

Configure the Print Server using the SMC Printer Port Monitor

Configure LPR port on Windows 2000/XP

APPENDIX A | PC Troubleshooting

APPENDIX B | Internet Connection Troubleshooting

APPENDIX C | Frequently Asked Questions

APPENDIX D | Port List – Application / Games

APPENDIX E | Technical Specifications

APPENDIX F | Compliances

APPENDIX G | Technical Support

Barricade g Wireless Router with USB Print Server Manual

CHAPTER 1 | Introduction

Congratulations on your purchase of a Barricade™ g Broadband Router with USB Print Server

(SMC2804WBRP-G). SMC is proud to provide you with a powerful yet simple communication device

for connecting your local area network (LAN) to the Internet and sharing a USB printer on your

network.

1.0 | Features and Benefits

•EZ 3-Click Installation Wizard - A new and improved way to install your Barricade in

seconds

•Built-in USB print Server to share your USB-enabled printer

•Internet connection to ethernet broadband modem via a 10/100 Mbps WAN port

•Local network connection via a 4-port auto-sensing 10/100 Mbps Ethernet switch

•DHCP for dynamic IP configuration, and DNS for domain name mapping

•Firewall with Stateful Packet Inspection, client privileges, hacker prevention, DoS, and NAT

•NAT also enables multi-user access with a single-user account, and virtual server

functionality (providing protected access to Internet services such as web, mail, FTP, and

Telnet)

•Virtual Private Network support using PPTP, L2TP, or IPSec pass-through

•User-definable application sensing tunnel supports applications requiring multiple

connections

•Parental controls allows the user to block access to certain web sites

•Email alerts when the users network is being compromised

•Easy setup through a web browser on any operating system that supports TCP/IP

•Compatible with various internet applications, including Peer-to-Peer file sharing, Online

Games, and Instant Message utilities.

1.1 | Package Contents

Before installing the Barricade™ g Broadband Router with USB Print Server, verify that you have the

items listed under “Package Contents.” Also be sure that you have the necessary cabling. If any of

the items are missing or damaged, contact your local SMC distributor.

•Barricade g Broadband Router with USB Print Server

•Power adapter (9v/1a)

•One CAT-5 Ethernet cable

•CD with User Guide and EZ 3-Click Installation Wizard

•Quick Installation Guide

If possible, retain the carton and original packing materials in case there is a need to return the

product.

1.2 | Minimum Requirements

•Cable or DSL Modem with Ethernet connection and Internet access from your local

telephone company or Internet Service Provider (ISP) using a DSL modem or cable modem.

•A computer equipped with a 10 Mbps, 100 Mbps, or 10/100 Mbps Fast Ethernet card, or

USB-to-Ethernet converter.

•Network adapter with Ethernet (UTP CAT 5) cabling and TCP/IP protocol installed per PC

•Internet Explorer 4.0 (or Higher) or Netscape Navigator 4.7 (or Higher) for Web-based

configuration of the Barricade

Barricade g Wireless Router with USB Print Server Manual

CHAPTER 2 | Getting to Know the Barricade

The SMC2804WBRP-G Barricade Cable/DSL Broadband Router is the perfect solution for the

home/office environment. This full-featured router offers:

•1 - USB 1.1 Print Server port

•802.11g Wireless with Performance Enhancing Nitro™ Technology

•4 - 10/100 Mbps Auto-Sensing LAN ports with Auto-MDI MDIX feature

•1 - 10/100 Mbps WAN port with Auto-MDI MDIX feature

•Comprehensive LEDs for network status and troubleshooting

•Reset Button

2.1 | LED Indicators

The Barricade includes LED indicators on the front panel that simplify installation and network

troubleshooting.

LED ON OFF FLASHING

PWR (POWER) Receiving power Not receiving power N/A

SPD (WAN) 100Mbps WAN

connection detected

10Mbps WAN

connection detected

N/A

Link/ACT (WAN) Good WAN connection

detected

No WAN connection

detected

Data transmitting

through the WAN

WLAN Wireless function is

enabled

Wireless function is

disabled

Data transmitting

through wireless

Link/ACT (LAN) Good LAN connection

detected

No LAN connection

detected

Data transmitting

through the LAN

Resetting the Barricade

The Reset button is located on the rear panel of the Barricade Broadband Router. Use a paper clip

or a pencil tip to push the Reset button.

Reset

If the Router is having problems connecting to the Internet, simply unplug the router for 3 seconds

then plug back in.

Restore Factory Defaults

If resetting the router does not resolve your issue, then you can follow these steps:

1. Leave power plugged into the router

2. Locate the reset button on the back panel, press and hold until WAN LED flashes off.

3. Release reset button.

Barricade g Wireless Router with USB Print Server Manual

CHAPTER 3 | Getting Connected

The SMC2804WBRP-G Barricade g Router with USB Print Server is connected between the Ethernet

Broadband Modem and your computers, either wired or wireless. If you have more then one

computer to connect, simply plug the other computers into the LAN ports on the back of the router

or connect via a wireless signal.

MODEM

connected

o WAN Portt

COMPUTER

connected to

LAN Port

3.1 | Basic Installation Procedure

1. CONNECT the WAN

Connect an Ethernet cable from your cable or DSL modem to the Barricade g WAN port on the

back on the router.

2. CONNECT the LAN

Run an Ethernet cable from one of the LAN ports on the back of the Barricade g to your

computer’s wired network adapter.

3. POWER on

Connect the power cable to the Barricade.

NOTE: It is highly recommended that you do you initial configuration from a wired connection.

Once you have completed connecting all of the hardware, simply insert the Barricade g CD-ROM

and the EZ 3-Click Installation Wizard will automatically get you connected you to the Internet.

For manual configuration of the PCs, see Chapter 4.

For advanced configuration of the Barricade Broadband Router, see Chapter 5.

Barricade g Wireless Router with USB Print Server Manual

CHAPTER 4 | Configuring your Computer

The information outlined in this chapter will guide you through the configuration for the following

Operating Systems:

•Windows 95/98

•Windows Me

•Windows 2000

•Windows XP

•Apple Macintosh

4.1 | Configuring Windows 95/98/Me

1. Access your Network settings by clicking [Start], choose [Settings], and then select [Control

Panel].

2. In the Control Panel, locate and double-click the [Network] icon.

3. Highlight the TCP/IP line that has been assigned to your network card on the

[Configuration] tab of the [Network] properties window.

4. Next, click the [Properties] button to view that adapter’s TCP/IP settings.

Barricade g Wireless Router with USB Print Server Manual

5. From the TCP/IP Properties dialog box, click the [Obtain an IP address automatically]

option.

6. Next click on the [Gateway] tab and verify the Gateway field is blank. If there are IP

addresses listed in the Gateway section, highlight each one and click [Remove] until the

section is empty.

7. Click the [OK] button to close the TCP/IP Properties window.

8. On the Network Properties Window, click the [OK] button to save these new changes.

NOTE: Windows may ask you for the original Windows installation disk or additional files.

Check for the files at c:\windows\options\cabs, or insert your Windows CD-ROM into your

CD-ROM drive and check the correct file location, for example, D:\win98, D:\win9x.

(assume “D” is your CD-ROM drive).

9. Windows may prompt you to restart the PC. If so, click the [Yes] button. If Windows does

not prompt you to restart your computer, do so anyways to ensure your settings.

4.2 | Configuring Windows 2000

1. Access your Network settings by clicking [Start], choose [Settings], and then select [Control

Panel]

2. In the Control Panel, locate and double-click the [Network and Dial-up Connections] icon

3. Locate and double-click the [Local Area Connection] icon for the Ethernet adapter that is

connected to the Barricade. When the Status dialog box window opens, click the

[Properties] button.

4. On the [Local Area Connection] Properties box, verify the box next to Internet Protocol

(TCP/IP) is checked. Then highlight the Internet Protocol (TCP/IP), and click the Properties

button.

5. Select Obtain an IP address automatically to configure your computer for DHCP. Click the

[OK] button to save this change and close the Properties window.

6. Click the [OK] button again to save these new changes.

7. Reboot your PC.

Barricade g Wireless Router with USB Print Server Manual

4.3 | Configuring Windows XP

The following instructions assume you are running Windows XP with the default interface. If you

are using the Classic interface (where the icons and menus look like previous Windows versions),

please follow the instructions for Windows 2000 outlined above.

1. Access your Network settings by clicking [Start], choose [Control Panel], select [Network

and Internet Connections] and then click on the [Network Connections] icon.

2. Locate and double-click the Local Area Connection icon for the Ethernet adapter that is

connected to the Barricade Router. Next, click the [Properties] button.

3. On the [Local Area Connection] Properties box, verify the box next to Internet Protocol

(TCP/IP) is checked. Then highlight the Internet Protocol (TCP/IP), and click the Properties

button.

4. Select Obtain an IP address automatically to configure your computer for DHCP. Click the

[OK] button to save this change and close the Properties window.

5. Click the [OK] button again to save these new changes.

6. Reboot your PC.

Barricade g Wireless Router with USB Print Server Manual

4.4 | Configuring a Macintosh Computer

You may find that the instructions here do not exactly match your screen. This is because these

steps and screenshots were created using Mac OS 8.5. Mac OS 7.x and above are all very similar,

but may not be identical to Mac OS 8.5.

1. Pull down the Apple Menu. Click [Control Panel] and select TCP/IP.

2. In the TCP/IP dialog box, make sure that [Ethernet] is selected in the [Connect Via:] field.

If [Using DHCP Server] is already selected in the [Configure] field, your computer is already

configured for DHCP. Close the TCP/IP dialog box, and skip to Step 2 Disable HTTP Proxy

(bottom of this page).

3. All the information that you need to record is on the [TCP/IP] dialog box. Use the space

below to record the information.

4. Select [Using DHCP Server] in the [Configure] field and close the window.

5. Another box will appear asking whether you want to save your TCP/IP settings. Click

[Save].

Andere Handbücher für Barricade g SMC2804WBRP-G

Inhaltsverzeichnis

Andere SMC Networks Netzwerk-Router Handbücher

SMC Networks

SMC Networks Barricade SMC7401BRA Bedienungsanleitung

SMC Networks

SMC Networks EZ109DT Bedienungsanleitung

SMC Networks

SMC Networks Barricade SMC2804WBR38 Bedienungsanleitung

SMC Networks

SMC Networks EZ Connect g Bedienungsanleitung

SMC Networks

SMC Networks Barricade SMC7404BRA EU Bedienungsanleitung

SMC Networks

SMC Networks 7824M/VSW Bedienungsanleitung

SMC Networks

SMC Networks WUSB32 Bedienungsanleitung

SMC Networks

SMC Networks TigerSwitch SMC6709L2 Programmierhandbuch

SMC Networks

SMC Networks SMCGS502 - FICHE TECHNIQUE Bedienungs- und Sicherheitshinweise

SMC Networks

SMC Networks Barricade SMC7401BRA Bedienungsanleitung

SMC Networks

SMC Networks BR14VPN - annexe 1 Bedienungsanleitung

SMC Networks

SMC Networks GS501 Bedienungsanleitung

SMC Networks

SMC Networks SMC6405TX Bedienungsanleitung

SMC Networks

SMC Networks SMCWBR14-N5 Bedienungsanleitung

SMC Networks

SMC Networks SMC7901BRA5 Bedienungsanleitung

SMC Networks

SMC Networks SMC8612T2 Programmierhandbuch

SMC Networks

SMC Networks Barricade SMC7004ABR Bedienungsanleitung

SMC Networks

SMC Networks SMC Barricade Plus SMC7004WFW Bedienungsanleitung

SMC Networks

SMC Networks Barricade SMC7901BRA4 Bedienungs- und Sicherheitshinweise

SMC Networks

SMC Networks SMCGS10C-Smart Bedienungsanleitung

SMC Networks

SMC Networks SMC6724AL2 Bedienungsanleitung

SMC Networks

SMC Networks Barricade SMCWBR14S-N Bedienungsanleitung

SMC Networks

SMC Networks Barricade SMC7004VBR Bedienungsanleitung

SMC Networks

SMC Networks 2304WBR-AG Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung