SMC Networks Barricade SMC7004ABR Bedienungsanleitung

Barricade

™

Broadband Router

10/100 Mbps Broadband Router

◆ Internet access via –

• 10/100 Mbps WAN port connection to xDSL/Cable modem, or

• RS-232 console port connection to ISDN/PSTN modem

◆ Home networking via –

• Four/Eight 10/100 Mbps Ethernet switch ports

◆ Built-in Print Server

◆ Automatic IP configuration with DHCP

◆ Firewall – client privileges, hacker prevention, NAT

◆ Multi-user access (up to 253), single-user account

◆ Virtual server with network address translation

◆ Virtual Private Network using PPTP, L2TP, IPSec

User Guide

SMC7004ABR

38 Te s l a

Irvine, CA 92618

Phone: (949) 679-8000

Barricade™

Broadband Router

User Guide

From SMC’s Barricade line of Broadband Routers

February 2002

Revision Number: R02

Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable.

However, no responsibility is assumed by SMC for its use, nor for any infringements of patents or

other rights of third parties which may result from its use. No license is granted by implication or

otherwise under any patent or patent rights of SMC. SMC reserves the right to change specifications

at any time without notice.

SMC Networks, Inc.

38 Tesla

Irvine, CA 92618

Trademarks:

SMC is a registered trademark; and Barricade is a trademark of SMC Networks, Inc. Other product

and company names are trademarks or registered trademarks of their respective holders.

IMITED

ARRANTY

Limited Warranty Statement: SMC Networks, Inc. (“SMC”) warrants its products to

be free from defects in workmanship and materials, under normal use and service, for

the applicable warranty term. All SMC products carry a standard 90-day limited

warranty from the date of purchase from SMC or its Authorized Reseller. SMC may,

at its own discretion, repair or replace any product not operating as warranted with a

similar or functionally equivalent product, during the applicable warranty term. SMC

will endeavor to repair or replace any product returned under warranty within 30 days

of receipt of the product.

The standard limited warranty can be upgraded to a Limited Lifetime* warranty by

registering new products within 30 days of purchase from SMC or its Authorized

Reseller. Registration can be accomplished via the enclosed product registration card or

online via the SMC web site. Failure to register will not affect the standard limited

warranty. The Limited Lifetime warranty covers a product during the Life of that

Product, which is defined as the period of time during which the product is an “Active”

SMC product. A product is considered to be “Active” while it is listed on the current

SMC price list. As new technologies emerge, older technologies become obsolete and

SMC will, at its discretion, replace an older product in its product line with one that

incorporates these newer technologies. At that point, the obsolete product is

discontinued and is no longer an “Active” SMC product. A list of discontinued

products with their respective dates of discontinuance can be found at:

http://www.smc.com/index.cfm?action=customer_service_warranty.

All products that are replaced become the property of SMC. Replacement products

may be either new or reconditioned. Any replaced or repaired product carries either a

30-day limited warranty or the remainder of the initial warranty, whichever is longer.

SMC is not responsible for any custom software or firmware, configuration

information, or memory data of Customer contained in, stored on, or integrated with

any products returned to SMC pursuant to any warranty. Products returned to SMC

should have any customer-installed accessory or add-on components, such as expansion

modules, removed prior to returning the product for replacement. SMC is not

responsible for these items if they are returned with the product.

Customers must contact SMC for a Return Material Authorization number prior to

returning any product to SMC. Proof of purchase may be required. Any product

returned to SMC without a valid Return Material Authorization (RMA) number

clearly marked on the outside of the package will be returned to customer at

customer’s expense. For warranty claims within North America, please call our

toll-free customer support number at (800) 762-4968. Customers are responsible for all

shipping charges from their facility to SMC. SMC is responsible for return shipping

charges from SMC to customer.

IMITED

ARRANTY

WARRANTIES EXCLUSIVE: IF AN SMC PRODUCT DOES NOT OPERATE

AS WARRANTED ABOVE, CUSTOMER’S SOLE REMEDY SHALL BE REPAIR

OR REPLACEMENT OF THE PRODUCT IN QUESTION, AT SMC’S OPTION.

THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND

ARE IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS

OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY

OR OTHERWISE, INCLUDING WARRANTIES OR CONDITIONS OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SMC

NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO

ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE

SALE, INSTALLATION, MAINTENANCE OR USE OF ITS PRODUCTS. SMC

SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND

EXAMINATION DISCLOSE THE ALLEGED DEFECT IN THE PRODUCT

DOES NOT EXIST OR WAS CAUSED BY CUSTOMER’S OR ANY THIRD

PERSON’S MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING,

UNAUTHORIZED ATTEMPTS TO REPAIR, OR ANY OTHER CAUSE

BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE,

LIGHTNING, OR OTHER HAZARD.

LIMITATION OF LIABILITY: IN NO EVENT, WHETHER BASED IN

CONTRACT OR TORT (INCLUDING NEGLIGENCE), SHALL SMC BE

LIABLE FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR

PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE, LOSS

OF BUSINESS, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN

CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE,

PERFORMANCE, FAILURE, OR INTERRUPTION OF ITS PRODUCTS, EVEN

IF SMC OR ITS AUTHORIZED RESELLER HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES.

SOME STATES DO NOT ALLOW THE EXCLUSION OF IMPLIED

WARRANTIES OR THE LIMITATION OF INCIDENTAL OR

CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS, SO THE

ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, WHICH MAY

VARY FROM STATE TO STATE. NOTHING IN THIS WARRANTY SHALL

BE TAKEN TO AFFECT YOUR STATUTORY RIGHTS.

* SMC will provide warranty service for one year following discontinuance from the

active SMC price list. Under the limited lifetime warranty, internal and external power

supplies, fans, and cables are covered by a standard one-year warranty from date of

purchase.

SMC Networks, Inc.

38 Tesla

Irvine, CA 92618

vii

COMPLIANCES

FCC - Class B

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with instructions, may cause harmful interference to

radio communications. However, there is no guarantee that the interference will not

occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected

• Consult the dealer or an experienced radio/TV technician for help

EC Conformance Declaration - Class B

SMC contact for these products in Europe is:

SMC Networks Europe,

Edificio Conata II,

Calle Fructuós Gelabert 6-8, 2o, 4a,

08970 - Sant Joan Despí,

Barcelona, Spain.

This information technology equipment complies with the requirements of the

Council Directive 89/336/EEC on the Approximation of the laws of the Member

States relating to Electromagnetic Compatibility and 73/23/EEC for electrical

equipment used within certain voltage limits and the Amendment Directive 93/68/

EEC. For the evaluation of the compliance with these Directives, the following

standards were applied:

RFI

Emission: * Limit class B according to EN 55022:1998

* Limit class A for harmonic current emission according to EN 61000-3-2/

1995

* Limitation of voltage fluctuation and flicker in low-voltage supply system

according to EN 61000-3-3/1995

Immunity: * Product family standard according to EN 55024:1998

OMPLIANCES

viii

Industry Canada - Class B

This digital apparatus does not exceed the Class B limits for radio noise emissions from

digital apparatus as set out in the interference-causing equipment standard entitled

“Digital Apparatus,” ICES-003 of the Department of Communications.

Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux

appareils numériques de Classe B prescrites dans la norme sur le matériel brouilleur:

“Appareils Numériques,” NMB-003 édictée par le ministère des Communications.

Japan VCCI Class B

Australia AS/NZS 3548 (1995) - Class B

SMC contact for products in Australia is:

SMC Communications Pty. Ltd.

Suite 18, 12 Tryon Road,

Lindfield NSW2070,

Phone: 61-2-94160437

Fax: 61-2-94160474

* Electrostatic Discharge according to EN 61000-4-2:1995 (Contact Discharge:

±4 kV, Air Discharge: ±8 kV)

* Radio-frequency electromagnetic field according to EN 61000-4-3: 1996 (80

- 1000MHz with 1kHz AM 80% Modulation: 3V/m)

* Electrical fast transient/burst according to EN 61000-4-4:1995(AC/DC

power supply: ±1kV, Data/Signal lines: ±0.5kV)

* Surge immunity test according to EN 61000-4-5:1995(AC/DC Line to Line:

±1kV, AC/DC Line to Earth: ±2kV )

* Immunity to conducted disturbances, Induced by radio-frequency fields: EN

61000-4-6:1996(0.15 - 80MHz with 1kHz AM 80% Modulation: 3V/m)

* Power frequency magnetic field immunity test according to EN

61000-4-8:1993(1A/m at frequency 50Hz)

* Voltage dips, short interruptions and voltage variations immunity test

according to EN 61000-4-11:1994(>95% Reduction @10ms, 30% Reduction

@500ms, >95% Reduction @5000ms)

LVD: * EN60950(A1/1992; A2/1993; A3/1993; A4/1995; A11/1997)

OMPLIANCES

Safety Compliance

Underwriters Laboratories Compliance Statement

Important! Before making connections, make sure you have the correct cord set.

Check it (read the label on the cable) against the following:

The unit automatically matches the connected input voltage. Therefore, no additional

adjustments are necessary when connecting it to any input voltage within the range

marked on the rear panel.

Wichtige Sicherheitshinweise (Germany)

1. Bitte lesen Sie diese Hinweise sorgfältig durch.

2. Heben Sie diese Anleitung für den späteren Gebrauch auf.

3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Verwenden Sie keine

Flüssigoder Aerosolreiniger. Am besten eignet sich ein angefeuchtetes Tuch zur

Reinigung.

4. Die Netzanschlu ßsteckdose soll nahe dem Gerät angebracht und leicht zugänglich

sein.

5. Das Gerät ist vor Feuchtigkeit zu schützen.

6. Bei der Aufstellung des Gerätes ist auf sicheren Stand zu achten. Ein Kippen oder

Fallen könnte Beschädigungen hervorrufen.

7. Die Belüftungsöffnungen dienen der Luftzirkulation, die das Gerät vor Überhit-

zung schützt. Sorgen Sie dafür, daß diese Öffnungen nicht abgedeckt werden.

8. Beachten Sie beim Anschluß an das Stromnetz die Anschlußwerte.

9. Verlegen Sie die Netzanschlußleitung so, daß niemand darüber fallen kann. Es

sollte auch nichts auf der Leitung abgestellt werden.

10. Alle Hinweise und Warnungen, die sich am Gerät befinden, sind zu beachten.

Operating Voltage Cord Set Specifications

120 Volts UL Listed/CSA Certified Cord Set

Minimum 18 AWG

Type SVT or SJT three conductor cord

Maximum length of 15 feet

Parallel blade, grounding type attachment plug rated

15A, 125V

240 Volts (Europe only) Cord Set with H05VV-F cord having three conductors

with minimum diameter of 0.75 mm2

IEC-320 receptacle

Male plug rated 10A, 250V

OMPLIANCES

11. Wird das Gerät über einen längeren Zeitraum nicht benutzt, sollten Sie es vom

Stromnetz trennen. Somit wird im Falle einer Überspannung eine Beschädigung

vermieden.

12. Durch die Lüftungsöffnungen dürfen niemals Gegenstände oder Flüssigkeiten in

das Gerät gelangen. Dies könnte einen Brand bzw. elektrischen Schlag auslösen.

13. Öffnen sie niemals das Gerät. Das Gerät darf aus Gründen der elektrischen Sicher-

heit nur von authorisiertem Servicepersonal geöffnet werden.

14. Wenn folgende Situationen auftreten ist das Gerät vom Stromnetz zu trennen und

von einer qualifizierten Servicestelle zu überprüfen:

a. Netzkabel oder Netzstecker sind beschädigt.

b. Flüssigkeit ist in das Gerät eingedrungen.

c. Das Gerät war Feuchtigkeit ausgesetzt.

d. Wenn das Gerät nicht der Bedienungsanleitung entsprechend funktioniert oder

Sie mit Hilfe dieser Anleitung keine Verbesserung erzielen.

e. Das Gerät ist gefallen und/oder das Gehäuse ist beschädigt.

f. Wenn das Gerät deutliche Anzeichen eines Defektes aufweist.

15. Stellen Sie sicher, da? die Stromversorgung dieses Ger‰tes nach der EN 60950

gepr¸ft ist. Ausgangswerte der Stromversorgung sollten die Werte von AC 7,5-8V,

50-60Hz nicht ¸ber oder unterschreiten sowie den minimalen Strom von 1A nicht

unterschreiten..

Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 Teil 1000 beträgt 70dB(A)

oder weniger.

Andere Handbücher für Barricade SMC7004ABR

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere SMC Networks Netzwerk-Router Handbücher

SMC Networks

SMC Networks 7908A-ISP Bedienungsanleitung

SMC Networks

SMC Networks Barricade SMC7004ABR Bedienungsanleitung

SMC Networks

SMC Networks SMC-EZ1026DT Bedienungsanleitung

SMC Networks

SMC Networks ADSL2 Barricade N Pro SMC7904WBRA-N Bedienungsanleitung

SMC Networks

SMC Networks Barricade SMC7401BRA Bedienungsanleitung

SMC Networks

SMC Networks Barricade SMC7404BRA EU Bedienungsanleitung

SMC Networks

SMC Networks 7908VOWBRA2 Bedienungsanleitung

SMC Networks

SMC Networks Barricade SMC7004BR Bedienungsanleitung

SMC Networks

SMC Networks Barricade SMC7004ABR Bedienungsanleitung

SMC Networks

SMC Networks EZ6516TX - annexe 1 Bedienungsanleitung

SMC Networks

SMC Networks EZ Switch SMC-EZ1016DT Bedienungsanleitung

SMC Networks

SMC Networks FS1601 Bedienungsanleitung

SMC Networks

SMC Networks 7004VBR Bedienungsanleitung

SMC Networks

SMC Networks TigerSwith 100 SMC6924VF Bedienungsanleitung

SMC Networks

SMC Networks EZ Connect SMC7003ADSL Bedienungsanleitung

SMC Networks

SMC Networks 2585W-G FICHE Bedienungsanleitung

SMC Networks

SMC Networks 100BASE-TX Programmierhandbuch

SMC Networks

SMC Networks SMC6405TX Bedienungsanleitung

SMC Networks

SMC Networks SMC6152L2 Bedienungsanleitung

SMC Networks

SMC Networks BR14VPN - annexe 1 Bedienungsanleitung

SMC Networks

SMC Networks Barricade SMC7908VoWBRA Bedienungsanleitung

SMC Networks

SMC Networks GS1601 Bedienungsanleitung

SMC Networks

SMC Networks Barricade SMC7204BRA Bedienungsanleitung

SMC Networks

SMC Networks 7004VBR Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung