SMC Networks EZ1026DT Bedienungsanleitung
SMC-EZ1026DT V.2
1
SMC-1026DT V.2
Unmanaged
Ethernet/Fast Ethernet
Switch
User Guide
EZ Switch 10/100
SMC-EZ1026DT V.2
2
Table of Contents
1. Introduction ................................................................. 3
1.1 Features ............................................................................. 4
1.2 Package Contents .............................................................. 5
2. Hardware Description.................................................... 6
2.1 Hardware Description......................................................... 6
The Front Panel .............................................................................6
10/100Base-TX RJ-45 ports (Auto MDI/MDIX ):.............................7
Expansion Slots: ............................................................................7
Console Port: .................................................................................7
2.2 LED Indicators.................................................................... 7
Rear Panel .....................................................................................8
Power On .......................................................................................9
3. Connecting to the Network............................................ 9
3.1 Pre-Installation Requirements ............................................ 9
3.2 Mounting the Switch ......................................................... 10
Desktop Mounting ........................................................................10
Rack-mounted Installation............................................................ 11
3.3 Connecting to the Switch.................................................. 12
3.4 Login in the Console Interface.......................................... 13
4. Network Configuration................................................. 21
4.1 Collapsed Backbone Application...................................... 21
4.2 Departmental Bridge ........................................................ 22
4.3 High Performance Switched Workgroup .......................... 23
4.4. VLAN Application ............................................................ 24
Port-based VLAN Workgroup.......................................................24
Shared Server..............................................................................25
5. Product Specifications................................................. 27
SMC-EZ1026DT V.2
3
Figure 1-1. The
SMC-EZ1026DT V.2
1. Introduction
Welcome to the World of Switching-Network.
In modern society, communication and information sharing are
fundamental to our lifestyle. Computer networks are one of the
fastest mean of communication.
As your company grows, your network demands will increase. …
The SMC-EZ1026DT V.2 Switch is designed to provide your network
with Ethernet, Fast Ethernet, and Gigabit Ethernet connectivity over
twisted pair and fiber optic cabling. Two expansion slots on the front
panel of the SMC-EZ1026DT V.2 Switches further add to the
flexibility of the systems.
The SMC-EZ1026DT V.2 is a Smart Fast Ethernet switch, that
provides a number of exceptional features with extremely flexible
configuration expansions without compromising the wire speed
performance.
The SMC-EZ1026DT V.2 switch provide wire-speed switching with
advanced bridging functions like VLAN, link aggregation (Trunk) and
port mirroring. It can also support two different GBIC type as Mini
GBIC LC and standard GBIC SC.
SMC-EZ1026DT V.2
4
1.1Features
▓ Conforms to IEEE802.3,IEEE 802.3 ab,
IEEE802.3u,IEEE802.3z ,IEEE802.3x IEEE802.1p
24 auto-sensing 10/100Mbps Ethernet RJ-45 ports
2 Expansion slots for optional modules: 1-port Gigabit
( SX/LX ), 1-port Gigabit Copper, and 1-port 100M Fiber
Module
Automatic MDI/MDIX crossover for each 10/100Base-TX port
One Console-connecting port for communication parameter
configuration
Auto-negotiation & Full-duplex/half-duplex supported
Store-and- Forward error free packet forwarding scheme
8K-entry MAC address table
6Mbits share memory
Full wire speed forwarding rate
LED-indicators for Power, 10/100M, LK/ACT, FD/ COL
statuses
Intelligent Management Features
Console Configuration
Port Based VLAN supported
IEEE802.3x Flow Control Mechanism is used in Full-Duplex
mode and back-pressure is used in half-duplex
Link Aggregation function supported
Port Mirror supported
Bandwidth Control
SMC-EZ1026DT V.2
5
1.2 Package Contents
Unpack the carton of the SMC-EZ1026DT V.2 Switch and verify
them against the checklist below.
SMC-EZ1026DT V.2 Switch Rubber Feet
Rack-mounted Kit RS-232 cable
Power Cord
Figure 1-2. Package Contents
Compare the contents of your SMC-EZ1026DT V.2 Switch package
with the standard checklist above. If any item is missing or damaged,
please contact your local dealer for service.
SMC-EZ1026DT V.2
6
2. Hardware Description
This section mainly describes the hardware of the SMC-EZ1026DT
V.2, and gives a functional overview of the Switch.
The physical dimensions of the SMC-EZ1026DT V.2 is: 440mmx
225mmx 44.5mm ( L x W x H )
2.1 Hardware Description
The SMC-EZ1026DT V.2 Switch has fixed 24-port auto-sensing
Ethernet RJ-45 connectors, and its chassis contains two expansion
slots.
The Front Panel
The Front Panel of the SMC-EZ1026DT V.2 consists of 24x
auto-sensing 10/100Mbps Ethernet RJ-45 Ports, two optional
expansion slots, and Console port. The LED Indicators are also
located on the front panel of the Switch.
Figure 2-1. The Front Panel of SMC-EZ1026DT V.2 Switch
LED Indicators
RJ-45 Ports
Console Port
Expansion Slots for Optional Module
SMC-EZ1026DT V.2
7
10/100Base-TX RJ-45 ports (Auto MDI / MDIX):
24x 10/100Mbps auto-sensing port for 10Base-T or 100Base-TX
devices connection. Note: [MDI/MDIX means that you can connect
to another Switch or workstation without changing non-crossover or
crossover cable.]
Expansion Slots:
For two of the following Optional modules:
1 Port Gigabit 1000Base-T Intelligent Switch Modules,
1 Port Gigabit 1000Base-SX/LX Intelligent Fiber Modules.
1 Port 100Base-FX Intelligent Fiber Module
GBIC/Mini GBIC Module
Console Port:
Console Management can be done through the Console Port. It
requires a direct connection between the SMC-EZ1026DT V.2
Switch and an end station (PC) via a RS-232 cable.
2.2LEDIndicators
All LED indicators are located on the front panel of the
SMC-EZ1026DT V.2 Switch. They provide a real-time indication of
system and operational status. The following table
gives descriptions of the LED status and their meanings.
Figure 2-2 The LED
Indicators
SMC-EZ1026DT V.2
8
LED Status Description
Green Power On
PWR
Off Power is Off.
Green The port is operating at the speed of 100Mbps.
100
Off No device attached or in 10Mbps mode
Green The port is connecting with the device.
Blinks The port is receiving or transmitting data.
LK/ACT
Off No device attached.
Yellow The port is operating in Full-duplex mode.
Blinks Collision of Packets occurs in the port.
FD/COL
Off No device attached or in half-duplex mode .
Table 2-3. The Descriptions of LED Indicators
Rear Panel
The 3-pronged power plug, On/Off switch are located at the Rear
Panel of the SMC-EZ1026DT V.2 Switch. (The Ventilation fan is
located on the side of the switch). The Switch will work with AC in
the range 100-240V AC, 50-60Hz.
Figure 2-4. The Rear Panel of the SMC-EZ1026DT V.2 Switch
SMC-EZ1026DT V.2
9
Power On
After all network cables are connected, plug the power cord into the
power socket on the back panel and the other end into a power
outlet. Turn the power On using the power switch on the back panel.
Check the front panel Power indicator to see if power is properly
supplied. The Switch uses a universal power supply that requires no
additional adjustment.
3. Connecting to the Network
This section provides the installation procedure and instructions for
assigning IP address.
3.1Pre-InstallationRequirements
Before you start hardware installation, make sure your installation
environment has below items:
PCs with 10/100Mbps Ethernet NICs/100/1000Mbps Fiber
NICs:
Your PC must have a standard Ethernet interface to connect to
the Switch.
UTP cable with RJ45 connectors/ Fiber cable with MT-RJ/
VF-45 connectors: Check if the cable and connectors work
properly.
A power outlet: 100 to 240V AC at 50 to 60 Hz: Make sure that
the Switch power is accessible and cables can be connected
easily.
Dedicated power supply: Use a dedicated power circuits or
power conditioners to supply reliable electrical power to the
network devices.
A dry cool place: Keep the Switch away from moisture. Avoid
SMC-EZ1026DT V.2
10
direct sunlight, heat source, and high amount of electromagnetic
interference around.
Mounting tools: If you intend to mount the Switch on a rack,
make sure you have all the tools, mounting brackets, screws etc.
Caution:
Cabling must be away from sources of electrical noise such as
radio, computers, transmitters, broadband amplifiers, power
lines and keep away from TVs, hair dryers, and microwave.
Airflow around the Switch and through its vents on the rear
cannot be restricted.
3.2 Mounting the Switch
The SMC-EZ1026DT V.2 Switch is suitable for use in an office
environment where it can be rack-mounted in standard EIA 19-inch
racks or standalone.
Desktop Mounting
1. Set the Switch on a sufficiently large flat space with a power
outlet nearby, and about the center of all networked devices.
2. Make sure mounting surface on the bottom of the Switch is
grease dust free.
3. Remove adhesive backing from your Rubber Feet.
Figure 3-1. Attaching Rubber Feet to each corner
on the bottom of the Switch
Dieses Handbuch passt für folgende Modelle
6
Inhaltsverzeichnis
Andere SMC Networks Netzwerk-Router Handbücher
SMC Networks
SMC Networks SMCGS10P-Smart Bedienungsanleitung
SMC Networks
SMC Networks Barricade SMC7404WBRA EU Bedienungsanleitung
SMC Networks
SMC Networks 7004VBR Bedienungsanleitung
SMC Networks
SMC Networks TigerSwitch SMC6709L2 Programmierhandbuch
SMC Networks
SMC Networks 7901BRA2 - annexe 2 Bedienungsanleitung
SMC Networks
SMC Networks SMCFS1601 - FICHE TECHNIQUE Bedienungsanleitung
SMC Networks
SMC Networks 24/16 Bedienungsanleitung
SMC Networks
SMC Networks ADSL2 Barricade N Pro SMC7904WBRA-N Bedienungsanleitung
SMC Networks
SMC Networks SMC7901BRA5 Bedienungsanleitung
SMC Networks
SMC Networks Barricade ADSL2/2+ Modem Router SMC7901BRA2 Bedienungsanleitung
SMC Networks
SMC Networks Barricade Plus SMC7004FW Bedienungsanleitung
SMC Networks
SMC Networks 7204BRB Bedienungsanleitung
SMC Networks
SMC Networks SMC6826MPE Bedienungsanleitung
SMC Networks
SMC Networks SMC Barricade SMCBR24Q Bedienungsanleitung
SMC Networks
SMC Networks 7401BRA V.2 Bedienungsanleitung
SMC Networks
SMC Networks Barricade Plus SMC7004FW Bedienungsanleitung
SMC Networks
SMC Networks Barricade Bedienungsanleitung
SMC Networks
SMC Networks 8708L2 Bedienungsanleitung
SMC Networks
SMC Networks Barricade SMC7908VoWBRA Bedienungsanleitung
SMC Networks
SMC Networks SMC6752AL2 Programmierhandbuch
Beliebte Netzwerk-Router Handbücher anderer Marken
NETGEAR
NETGEAR FS526T - Switch Bedienungsanleitung
Korenix
Korenix JetNet 5710G Series Bedienungsanleitung
Automated Logic
Automated Logic ZN551 Betriebsanleitung
Cisco
Cisco ASR 1000 Series Bedienerhandbuch
EnGenius
EnGenius ESR-9710 Bedienungsanleitung
Cisco
Cisco 805 Series Bedienungs- und Sicherheitshinweise