SME Model 6 Classic Bedienungsanleitung
INTEGRATED PRECISION TURNTABLE
OWNERS MANUAL
CLASSIC
Instrucons
This is not an ordinary turntable. These instrucons cover unpacking, adjustment and installaon
procedures and you owe it to yourself to read them carefully before proceeding further.
INTEGRATED PRECISION TURNTABLE
CLASSIC
Warning! Important Safety Instrucons:
RISK OF ELECTRIC SHOCK DO NOT REMOVE SPEED CONTROL UNIT COVER
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE SPEED CONTROL UNIT COVER.
THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
• Please read this manual carefully and keep it in a safe place for future reference.
• The slots in the speed control unit at the top and underside are provided for necessary venlaon. To ensure reliable operaon of this
apparatus, and protect from overheang, these slots must never be blocked or covered.
• Do not place a water containing vessel on this apparatus, as this can result in a risk of re or electric shock. Do not expose this apparatus
to rain or place it near water.
• If this apparatus accidentally gets wet, unplug it and contact an authorised dealer immediately.
• You can clean this apparatus with a damp cloth when necessary, but be sure to unplug the apparatus rst. To cut o the power source,
unplug the apparatus from the wall outlet.
• Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in re or electric shock.
• Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them,
paying parcular aenon to cords at the plug end, adaptors and the point they exit from the appliance.
• Before connecng the AC power cord to the speed control unit, make sure the voltage of the speed control unit, as marked on the label
at the rear, corresponds to the local electricity supply.
• Never insert anything metallic into the open parts of this apparatus.
• Only a qualied technician should remove the speed control unit cover.
• Be sure to hold the plug, not the cord, when disconnecng this apparatus from an electric socket.
• Locate this apparatus near an easily accessible AC outlet.
• If this apparatus does not operate normally, in parcular if there are any unusual sounds or smells, unplug it immediately and consult
an authorised dealer.
• Unplug this apparatus from the AC outlet before any service.
1
IMPORTANT NOTICE:
The mains lead on this equipment when supplied for use in the UK, is ed with a moulded plug incorporang a fuse. The value of the
fuse is indicated on the pin face of the plug and if it required replacing a fuse approved to BSI 1362 of the same rang must be used.
Never use the plug with the fuse cover omied if the cover is detachable. If the plug ed is not suitable for the power points in your
house or the cable is not long enough to reach the power point, you should obtain a suitable safety approved extension lead or consult
your dealer for assistance. However, if there is no alternave but to cut o the plug, remove the fuse rst and then safely dispose of the
plug. DO NOT connect the plug to a mains socket as there is a risk of shock hazard from the bared exible cord.
IMPORTANT:
The wires in the mains lead are coloured in accordance with the following code: BLUE NEUTRAL, BROWN LIVE. As these colours may
not correspond to the coloured markings idenfying the terminals in your plug, proceed as follows: The wire coloured BLUE must be
connected to the terminal marked with the leer N or coloured Blue or BLACK. The wire coloured BROWN must be connected to the
terminal marked with the leer L or coloured BROWN or RED.
WARNING:
DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, WHICH IS MARKED WITH THE LETTER E OR BY THE EARTH SYMBOL OR
COLOURED GREEN OR GREEN AND YELLOW.
WEEE SYMBOL INFORMATION
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable to the European Union and other European countries with separate collecon system).
The marking shown on this product or its literature, indicates that it should not be disposed with other household wastes at the
end of its working life. To prevent possible damage to the environment or human health from uncontrolled waste disposal, please
separate this from other types of wastes and recycle it responsibly to promote the sustainable re-use of material resources.
Household users should contact either the retailer where they purchased this product or their local government oce,
for more detailed informaon of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and condions of the purchase contract.
This product should not be mixed with other commercial wastes for disposal.
2
Introducon
Model 6 Precision Turntable
The SME Model 6 turntable is built to exacng engineering standards providing reliability
and freedom from crical adjustments. Build integrity, sophiscated electronics and
vibraon free moving parts allow the full capabilies of this premium sound system to
be fully explored.
The speed control unit is a highly sophiscated bi phase, frequency and amplitude, DSP
based sine wave generator, with a dedicated discrete power amplier to drive the motor.
It generates two pure sine waves which drive twin coils present inside the AC motor.
The frequency (speed) is user adjustable in approximately 0.0133 Hz steps allowing a very
accurate musical pitch to be set.
M2 - 9R Pick-up Arm
The M2- 9R precision pick-up arm is of a meculous build quality with all the most
important features including lightweight stainless-steel tone-arm tube, detachable
aluminium S2-R headhshell with double draw pins for extra security and azimuth
adjustment, tungsten balance weight, high quality ball race bearings in all planes and a
level of sness to suit a wide of cartridges.
3
Contents
1 Weights & Dimensions
2 Packing List
3 Parts Idencaon
4 Unpacking
5 Seng Up
6 Operaon – Speed Control
7 Operaon – Turntable
8 Pick-up Arm
9 Maintenance
10 Warranty
4
1. Weights & Dimensions (mm)
Turntable
Width: 420
Depth: 320
Height: 128
Plaer Diameter: 300
Spindle to Arm: 215.4
Net Weight: 9.1kg
Speed Control Unit
Width: 220
Depth: 200
Height: 85
Net Weight: 2.05kg
Power Consumpon: Idle 5W - Max 10W
5
2. Packing List
Qty Descripon Part No.3
1 Model 6 Serial No: ……………… □
1 Stroboscopic Disc 1087 □
1 Control Unit – 100V □ 115V □ 230V □ □
1 Power Cord – UK □ EUR □ USA □ □
1 Drive Belt □
1 Plaer □
1 Owner’s Manual □
1 Series M2-9R Precision Pick-up Arm □
1 Velcro Strap □
1 Detachable Headshell S2-R □
1 Alignment Protractor 2295 □
1 Headshell Hardware (Black) 2300-M2 □
1 2.0 A/F Hexagon Wrench 5924 □
1 Bias Weight 3520 □
1 Bias Guide 1916 □
1 0.89 A/F Hexagon Wrench 5926 □
1 Balance Weight 0554B2 □
1 Accessory Weight □
1 Spindle Washer □
1 Record Clamp □
6
2
5
6
11
10
9
12
7
1
3
4
1. Speed Control Unit
2. Power Buon
3. Rotary Speed Control
4. Plaer
5. Bias Weight
6. Bias Guide
7. Way Rod
8. Balance Weight
9. Pick-up Arm
10. Finger Li
11. Headshell
12. Way Rod / Rider Weight
3. Parts Idencaon
7
8
8
Phono Connectors & Power Output
Idencaon
Low Voltage
Power Cable 24V
Phono Output
Sockets
Mains
ON / OFF
Earth Point
Mains Input
AC Socket
Low Voltage Input
Socket 24V
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere SME Drehscheibe Handbücher
SME
SME Model 6 Bedienungsanleitung
SME
SME 20/3 Bedienungsanleitung
SME
SME 60 Bedienungsanleitung
SME
SME Model 6 Bedienungsanleitung
SME
SME 15 Bedienungsanleitung
SME
SME Diamond MK2 Synergy Bedienungsanleitung
SME
SME 10 Bedienungsanleitung
SME
SME 30/2 Bedienungsanleitung
SME
SME 10 Bedienungsanleitung
SME
SME 30/12 Bedienungsanleitung
