SMONET 2PCS Bedienungsanleitung
Wireless
Network Video Recorder System
User Manual
2PCS/4PCS/6PCS/8PCS
720P/960P/1080P
2CH/4CH/6CH/8CH NVR Kits
V.7-201709
Package Contents
How can I get product and technical support?
US Toll Free:1-866-678-0666 (Available after 5:00 PM at Pacific Time)
CA Toll Free:1-888-792-5254 (Available after 5:00 PM at Pacific Time)
Email:[email protected]
Skype ID: safeskysales003
FaceTime/What’s App/Viber/Tango: +86-158-1749-7067
Wechat ID: B997520270
Website: WWW.SMONETCCTV.COM
01
Thank you for choosing Smonet product.
Here is the list for product and relevant accessories.
S/N
1
2
3
4
5
6
7
8
Item
NVR
IP Camera(2CH/4CH/6CH/8CH)
DC 12V/2A power supply(for NVR)-3.3 feet
DC 12V/1A power supply(for IPC2CH/4CH/6CH/8CH)-10 feet
3.3 Ft network cable
USB mouse
4 Screws for HDD (only for systems without HDD)
User manual
Quantity
1pc
2/4/6/8 pcs
1pc
2/4/6/8 pcs
1pc
1pc
1bag
1pc
02
Getting Started
Before you begin installation, be sure to have the following:
PC or TV monitor
VGA or HDMI cable
Router (WAN)
Hard drive.If you purchased the system without hard drive, you must first install it.
If you do not have a hard drive, you will not be able to record and playback video.
Please see below for hard drive installation instructions
Do not attempt to install your cameras until you are able to view
images on your TV or PC monitor first.
Installing the hard drive – if your system has a pre-installed hard drive, please skip
this step and go directly the section below, Installing the NVR. If you purchased a
hard drive separately, it must be formatted after installed it. See the Frequently
Asked Questions section of this manual for instructions about how to format a hard
drive, refer the question, How do I format my new hard drive and check my hard
drive information?
1 Installing your Network Video Recorder System
Remove the cover from the unit,
and remove the top two screws
Remove the cover Insert the hard drive, secure it
to the bottom of the unit with the
four screws
Connect the data wire and
power wire as shown
Replace the cover and fasten screws
Installing the System
Connect the NVR and cameras with power adapters provided. Attach the anten
nas to the cameras, connect the mouse to the NVR. (Please note, power supply
for NVR box is 12V-2000mA)
Connect the PC or TV monitor to the NVR with a VGA or HDMI cable. You must
use a PC or TV monitor, you cannot connect to a laptop.
Connect the Router LAN Port to NVR WAN Port with Network Cable Provided.
The router must be WAN(Wide Area Network).
03
VGA Port
(PC Monitor)
HDMI Port
(TV Monitor)
Ethernet Port
(Router)
USB Port
(Mouse)
Power Supply
For step-by-step installation instructions, you can also watch our
video: https://youtu.be/NaVM6BK-dZY
04
Check NVR Network , Change NVR system login
password
2
Once you have completed connecting the NVR, wait approximately 2-3 minutes.
Next you will see the window below on your monitor screen. No password is neces-
sary, click ok to continue.
Right click on the home screen of your monitor, navigate to System setup > Network
setup. In the middle of the window you should see Cloud status as ONLINE and
Network Status as Healthy Network. If this does not appear, select DHCP and click
Enable as shown in the figure below. Click ok, then power off the NVR box, wait a
few seconds and power up.
05
Once you power up, repeat the steps outlined as above. Cloud status must be
ONLINE and Network Status must be Healthy Network. If this does not happen, you
will not be able to view remotely.
Right click on the home screen of your monitor, navigate to System setup > System
admin, click User on the left menu bar > Set password(Request: 8 Characters Max..
Keep it short.). Create a password and type it in the field, repeat new password, click
ok. Be sure to remember your password.
From your Smartphone, go to the App store. Download “IP PRO” or “Eseecloud”.
Ceate an account and password.Be sure to remember your account login
info.#Pic 1
Click "+", then click Add device by ID.#Pic2
On your device, either scan the QR code or manually enter your Cloud ID. You
can locate your Cloud ID on your monitor screen as seen earlier in section 2 of this
manual. (Use NVR login Username/password on your monitor screen here).#Pic3
If you have multiple Smartphones, you must register multiple accounts. You
cannot have one account across multiple devices.
06
Viewing on your SmartPhone
3
IOS
IP-Pro
Pic1 Pic2 Pic3
Android
Eseecloud
Click Settings > Device Manage & Add device
07
Viewing your system on your computer or laptop by
CMS software
4
For Windows system, please download CMS software from WWW.SMON
ETCCTV.COM.
Install CMS software first.
Select “By ESee ID”.
In the “ESee ID” box, enter the cloud ID(9 or 10 numbers). You can find it on your
home monitor screen. Look at your home monitor screen, right click the mouse,
Navigate to System setup> Network setup>find the Cloud ID.
Username is NVR system user name on your home monitor screen.(If you don’t
change it in your setup, it should be admin)
Password is your NVR system password on your home monitor screen.(If you
don’t change it in your setup, it should be blank, no password)
Channels: Input 4 or 6 or 8. If you have 4 cameras, enter 4 etc.
Click Confirm and you will see the video.
If that does not work, you may select “By IP
address” and go to your System Setup and
then go to the Network setup tab and get
your IP address, Gateway etc.
Please note, if you use MAC OS system,
E-mail Subject: Request CMS software for
MAC OS system
Record Video.
5
08
Here is an easy way to set the recording function if you need record 24 hours
everyday:
Right click on the home screen of your monitor, navigate to Manual record > select
all > click All on > click ok. Once you have completed setting up the recording
function, you will see a red dot in the upper right corner of each video. This indicates
the system is recording.
Here is another alternative way to set the recording.
From the home screen of your monitor, right click the mouse, navigate to System
setup >Record setup>Record Plan, pls select Everyday for Weekday, please select
time and click ok(If no hard drive or hard drive is not formatted, you cann’t record
and playback).
Playback Video.
6
09
Right click on the home screen of your monitor and navigate to System setup >
Record Setup again, click Copy to, check All, Click Ok. Copy the same setting for
Channel 1 for the remaining channels.
To use the playback feature, you must first set up the recording function as
described in the section above. To playback, from the home screen of your
monitor, right click and navigate to Video playback > Manual Search. Please note
that when the hard drive is full, the new recording will automatically overwrite the
prior recording.
Andere Handbücher für 2PCS
1
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
