BK-T6112 Service Manual
- 3 -
1.3 Technical specification
Item Parameter
Print method Thermal
Resolution 203/305DPI
Paper width 79.5~112±0.5 mm
Max.104mm （4.1 "）
Print width Max.832 dots (203DPI)
Print height Max: 800 mm
Min: 80 mm
Print speed
203DPI 1ST (Max): 200mm/s
203DPI 2ST(Max): 100mm/s
305DPI 1ST (Max): 150mm/s
305DPI 2ST (Max): 75mm/s
RAM memory SDRAM: 8MB
Flash memory 2MB/4MB (depending on the size of font library)
Print
head
temperature
detection Thermal resistor
Print head position detection Microswitch
Paper/mark detection Photoelectric/Mechanical photoelectric sensor
Paper near end detection Photoelectric sensor
Printing
Communication interface USB, RS-232 (optional)
Barcode
CODE128, ITF , UPC-A, UPC-E, EAN13, EAN8
CODE39, CODE93, CODABAR, PDF417, GS1, QR,
Maxicode
Character set
Standard characters, compressed characters
Optional Asian character set (simplified Chinese,
traditional Chinese, Japanese, Korean)
Character processing
All characters can be enlarged 1 to 6 times vertically and
horizontally.
Rotation print (0°, 90°, 180°, 270°);
Bold, white/black reverse, underline.
Barcode
Character
Image
Image BMP bitmap can be downloaded to RAM and FLASH;
Support direct bitmap printing
Paper type Continuous paper/marked paper
Paper roll OD Max.180mm
Core ID ф18-60mm
Paper thickness 55～150 um
Media
Thermal layer Outward / Inward
Power
consumption
+24V power supply, at room
temperature, average value 2.5A
Paper out detection Photoelectric sensor
Paper out speed 600~1000mm/s
Retraction detection Photoelectric sensor
Retraction speed 1000mm/s
PRESENTER
Paper out mode Retraction/holding/closing/ejection/throw-out (optional)
Print head lifetime ≥100Km
Cutter lifetime ≥300, 000 (65μm-thick thermal paper)
Reliability
MTBF 360,000 hours
Operating environment 0～45 , 20℃～90%RH(40 )℃
Environmental
requirements Storage environment -40～60 , 20℃～93% RH(40 )℃
Overall size
180(L) X 156.4(W) X 121(H)
(excluding paper holder, paper roll, including control
board)
Physical features
Weight About 2.2Kg (excluding paper roll and paper holder)
Table 1.3-1 Printer technical specification
