Snom ONE mini Bedienungsanleitung
snom.com
snom ONE mini
Quick Start Guide
Page 2 © 2012 snom technology, Inc.
Copyright © 2012 snom technology, Inc.—All rights reserved.
This document is supplied by snom technology. No part of this document may be reproduced,
republished or retransmitted in any form or by any means whatsoever, whether electronically
or mechanically, including, but not limited to, by way of photocopying, recording, information
recording or through retrieval systems, without the express written permission of snom
technology. snom technology reserves the right to revise this document and make changes
at any time and without the obligation to notify any person and/or entity of such revisions and/
or changes. Product specifications contained in this document are subject to change without
notice.
Page 3 © 2012 snom technology, Inc.
Contents
Package Contents .......................................................... 4
At a Glance................................................................... 4
Install the Device............................................................ 4
Log In ......................................................................... 6
Accept the License Agreement ........................................... 6
Configure a Static IP Address............................................. 7
Choose a Password ........................................................ 8
Register a Phone............................................................ 8
snom 3xx and snom 8xx ..................................................8
Customize the Name .................................................9
Customize Phone Assignment....................................... 9
m9 DECT Phones ...................................................... 10
Third-Party Phones ..................................................... 11
Wiki Help Topics........................................................... 12
Advanced Configuration ................................................. 13
Additional Languages .................................................... 13
More Information.......................................................... 13
Page 4 © 2012 snom technology, Inc.
Package Contents
Power Supply
(5V DC)
Plug Adapters for
Power Supply
snom ONE mini Unit
At a Glance
Reset
Button
Ethernet
(PoE)
Power
Install the Device
1. Connect an Ethernet cable to the NET port of the device.
Page 5 © 2012 snom technology, Inc.
2. Connect the other end of the Ethernet cable into the network. Following are
a couple of common scenarios.
1 2 3 4
Ethernet
Reset
Power
Power
3. Optional: If you are NOT using PoE, connect the power adapter to a power
outlet (A). Then connect the other end to the power port on the unit (B).
B
A
4. Confirm that the green LED on the face of the unit is lit. This indicates con-
nectivity to the network.
Important! Please read the configuration instructions on Page 4
before calling technical support!
Page 6 © 2012 snom technology, Inc.
Log In
To log in to the web interface of the snom ONE mini:
1. Point your web browser to the following address:
http://[fe80::204:13ff:fe44:xxxx]
This IP address is an IPv6 link-local IP address and will work as long as
your computer is connected to the same LAN as the snom ONE mini.
The address depends on the device’s MAC address, which is located
on the label on the back of the device. The last four digits (which in the
example above are indicated by xxxx) are unique for your snom ONE mini
device, while all other digits are the same for all snom ONE mini devices
because they belong to the same MAC address range (000413440000
to 00041344FFFF). For example, if your device has a MAC address of
0004134485DC, point your web browser to the following address (use
lowercase when entering the last four digits).
http://[fe80::204:13ff:fe44:85dc]
2. The login screen for the snom ONE mini is displayed. Log in with the
username admin and no password.
Accept the License Agreement
To license the product:
1. Switch to the administrator mode by clicking the Admin link on the top right
side of the page.
Page 7 © 2012 snom technology, Inc.
2. Click the Settings tab, then click License.
3. Click Accept.
Configure a Static IP Address
The snom ONE mini is a server in your network, so it is best to configure the device with
a static IP address so you’ll always know the IP address. While in administrator mode:
1. Click the System/IP Setup tab.
2. Click No on the DHCP setting.
3. Enter the IPv4 configuration, then click Save.
4. Reboot the system to apply this change.
Note: You can reboot the system from the web interface from the configuration
screen (Schedule Reboot) or by power-cycling the device.
Page 8 © 2012 snom technology, Inc.
Choose a Password
Once the network configuration has been set up, create a password for the system. You
can do this from within the administrator mode from the Settings tab.
Note: The operating system for the root account uses this same password.
Register a Phone
snom 3xx and snom 8xx
The snom ONE mini has been configured to automatically plug and play all snom
phones in the 3xx and 8xx series once the phones have been plugged into the network.
Each phone automatically grabs one of the pre-configured extensions on the snom ONE
mini (see below). Before the phones are plugged in, however, the extensions should be
customized for each user (see next page).
Page 9 © 2012 snom technology, Inc.
Customize the Name
The default names on the extensions should be changed to reflect the names of your
users.
1. Click the Accounts tab, then click on the extension.
2. Enter the user’s name into the first/last name fields, as shown below.
3. Click Save.
Customize Phone Assignment
By default, extensions are randomly assigned to phones, and this is appropriate if either
all the phones are of the same model (i.e., everyone gets the same type of phone any-
way) or it is not important as to who gets which phone, even if different phone models
are involved. However, if you have a few phones (e.g., snom 821) that must be as-
signed to specific extensions, you will need to bind the MAC address of the phone to
the extension that should be using that phone.
1. Locate the MAC address of the phone (the MAC address consists of 12 digits,
begins with 000413, and is located on the back of the phone).
2. From within the user’s extension on the snom ONE mini, navigate to the
Registrations page.
Page 10 © 2012 snom technology, Inc.
3. Enter the MAC address of the phone into the Bind to MAC Address field.
4. Click Save.
The phones can be plugged in once you have finished customizing the extensions.
m9 DECT Phones
The m9 DECT phones can easily be plug and played on the snom ONE mini once you
configure the MAC address of the m9 base station to the extensions of the snom ONE
mini.
1. Retrieve the MAC address from the m9 base station (the MAC address
consists of 12 digits, begins with 000413, and is located on the back of the
device).
2. From within the user’s extension on the snom ONE mini, navigate to the
Registrations page.
3. Enter the MAC address into the Bind to MAC Address field.
4. Click Save.
Inhaltsverzeichnis
Beliebte Telefonanlage Handbücher anderer Marken
Allo.com
Allo.com Nano 2 Bedienungsanleitung
ZYCOD
ZYCOD ZX50 Bedienungsanleitung
Panasonic
Panasonic KX-TDA100BX Bedienungsanleitung
LV switch
LV switch IPPBX800 Gebrauchsanweisung
Edge-Core
Edge-Core VST3305 Bedienungsanleitung
Panasonic
Panasonic KX-T7625 - Digital Proprietary Speakerphone 24... Bedienungsanleitung
Rauland-Borg
Rauland-Borg Telecenter IV Bedienungsanleitung
Grandstream Networks
Grandstream Networks UCM6208 Bedienungsanleitung
ATCOM
ATCOM IPPBX IP02 Bedienungsanleitung
Panasonic
Panasonic KX-TVS50 - 2 Port Voicemail System Bedienungsanleitung
bintec elmeg
bintec elmeg elmeg hybird 600 Bedienungsanleitung
Panasonic
Panasonic KX-NS300 Bedienungsanleitung
