There is a
line on the
convex
parts of
the legs.
1 2
Instruction manual (this document)
2 Units can be installed IGT Low Height 400mm Leg×４
SpecificationSet Contents
●Material: Frame / Aluminum Alloy (Anodized), Stainless Steel
Legs / Stainless Steel (Cationic Electrodeposition Coating), Resin
●Size: Frame / 596x496x30 (h) mm (L 23.5” W 19.5” H 1.2”), Legs Φ 25x410mm (L 16.0” W 0.98”)
●Weight: Pole / 3.5 kg (7.7lbs), Legs / 250gx4 (0.6lbs x 4pcs)
Thank you for purchasing a Snow Peak product. This is a set that includes the IGT Short Low Style Set Black and IGT Low Height 400mm Leg Set. To use this product safely and correctly, please take the time
to carefully read these instructions. After reading the instructions, keep this manual safe for future reference. If you find anything in the instruction manual that is difficult to understand or find a defect with the
product, stop using it immediately and contact the dealers where the product was purchased or Snow Peak Customer Service.
Safety precautions (Before use, please read this manual thoroughly to ensure safety and avoid accidents.)
DANGER / Misuse could easily result in a serious accident or death.
WARNING / Misuse could result in serious injury or death to the user.
●When setting up this product in combination with other products, read the instruction manuals of both products carefully before use.
●Do not use this product indoors in combination with other products; it's only designed for outdoor use.
●Do not use two cookers side by side on this product. Be sure to keep half units or more units between cookers for optimal safety.
●When replacing a fuel canister of the combustors or during refueling, make sure there is no fire nearby to prevent burns or even accidental fires.
●Before using the product, inspect it to ensure there are no abnormalities or defects in any of the parts. If any abnormalities are found, stop using it immediately and contact the dealer where the
product was purchased or Snow Peak Customer Service for inspection or repair. ●This product has complex structure to customize your cooking space. Do NOT let small children touch this product
during use to avoid unexpected accidents. ●Before using the product, inspect it to ensure there is no deformation on the convex part of the legs. ●Before replacing or changing the layout of the unit,
make sure that the unit and the item are cool enough. Otherwise, you may burn yourself. ●Avoid using this product under the blazing sun or with other IGT unit items. This product and surroundings
may become hot, and it may cause burns. ●When using this product, make sure that all legs touch the ground equally for maximum balance, and the setup weight, including the unit items, shouldn't
exceed 100 kg (220.5 lbs). ●When using this product with combustors, do not place it under or near flammable objects, such as tents, tarps, or dry grasses. Such areas have a high risk of fire. ●
Inspect the legs for looseness and confirm that everything is set up correctly before use. Loose legs could be accidentally undone, causing the product to fall or tip over and resulting in a fire or burns.
●Use this product on firm, flat ground. Do not use it in unstable or uneven areas. Using the product on a slope or in an unstable place may cause the product to fall and cause serious accidents. ●
Do not move this product during use. ●Avoid moving this product during use, especially when it's connected to other items or parts. Remember to separate everything before moving. ●Do not sit or
stand on this product. Sitting or standing on the product may cause unexpected accidents or damage. ●Do not attempt to modify this product. Modifications may impair its functionality or decrease
its strength and safety. Modifications make the product ineligible for after-sale services or warranty coverage.
We took many safety considerations when designing this product. Please read the CAUTION section thoroughly to avoid accidents such as property damage or injury caused by improper use.
Maintenance method
●If your product has not been used for a long time, please ask Snow Peak Customer Service to check
it before using it again.
●To remove dirt from the product, wipe it off with a dry cloth and dry it well. Do not wash the product
with water as water may get into the product, leading to corrosion.
●After use, remove any dirt and store it in a well-ventilated area and away from direct sunlight.
●To remove light dirt or moisture from the product, wipe it off quickly with a dry cloth and dry it well.
●Please always keep the joints between the frame and leg clean. To remove any dirt or dust from the
product, wipe it off with a dry cloth and dry it well.
●After use, wipe off any dirt and store it in a well-ventilated place.
CAUTION / Misuse could result in injury to the user and/or damage to property.
●This product is designed as a table and cooking table frame. Do not use it for any other purposes outside its intended use. ●Please store this product in a shaded, well-ventilated area after use. ●Do not
remove dirt, grease, and splatters with a metal spatula or an abrasive brush. There is a risk of scratches and deformation. Please refer to the "Maintenance Method" when removing dirt or cleaning the product.
●Unit items with a heat source, such as charcoal BBQ boxes and gas burners, should not be laid out next to wooden top plates, such as bamboo top plates (sold separately). The product may be damaged
or burned due to heat. Be sure to use our stainless-steel top plate next to a unit filled with a heat source. ●Never use this product near a bonfire. The product may get hot and cause burns. ●Falling, dropping,
or hitting this product may cause structural damage. ●During use and after use, the body and surrounding parts become extremely hot. Be careful not to burn yourself and keep the product away from children.
●Please always keep the joints between the frame and leg clean. If the legs are assembled with sand, dust, or dirt on them, it may cause sticking or poor stability. Also, please do not add any lubricants to
joint parts. ●Do not crush the joint frame parts on the legs. The leg locks will no longer work. ●Do not apply excessive force to the legs after they are secured, as they may become damaged. It will cause the
legs to bend or break and reduce durability. Also, do not secure the legs with excessive force. ●Please always keep the screw part clean to prevent sand or dust from getting into the parts. Do not expose the
screw part of the adjuster more than 25 mm(0.98"). ●The frame and legs have a black anodized coating to provide a protective finish. Do not scrub the surface with abrasive or sharp objects. It may cause
scratches and discolorations. Due to the structure of the leg joint parts, the metal base is exposed by the joint, but this does not affect the performance of the product. ●Depending on its usage and storage
conditions, the frame and legs may become discolored over time. Do not store the product in areas with direct sunlight for long periods of time. ●When carrying the frame and the legs together in the carrying
case, please ensure they're not touching each other as they will get surface scratches or even be damaged. ●Do not wipe this product with a high alcohol concentration disinfectant such as ethanol or other
organic solvents with a concentration of 80% or more. The coating on the surface may come off, exposing the product to rust and other deformations.
How to assemble and use
*This product has two units of space to customize the setup. Please do not let small children touch this product during use to avoid unexpected accidents.
Turn the frame upside down and place it on
the ground, as shown below.
insert convex parts of the legs into
the leg holes. Make sure that the tip
of the legs protrudes through the top
of the hole to the opposite side of the
frame.
Rotate legs to ensure a secure
fit. The lock works either
clockwise or counterclockwise.
The legs are designed to tilt
when installed.
Do not apply a horizontal force to the
legs when turning the setup or product
upside down. Please make sure the
frame is cooled down before disassem-
bling it; be sure to disassemble it in the
reverse order of the initial setup.
Do not place your weight on this
product by leaning or sitting on it; it
may fall over and cause damage or
accidents.
Iron Grill Table (IGT) Short Low Style Set Black
FES-153
MADE IN CHINA
Snow Peak guarantees the quality of all its products. Please contact your local Snow Peak dealer if you have any problems with this product. Snow Peak will replace or repair if the product is shown to have manufacture
defects. In other instances, Snow Peak may repair at an appropriate fee. Please note, the warranty does not apply under the following conditions: 1. Natural product deterioration over time. / 2. Damage caused by
alterations or careless handling. / 3. Damage caused by improper handling that is prohibited in the instruction manual. / 4. Product failure due to user accidents. / 5. Any damage except due to manufacturing defects. /
6. Damage caused by dirt and rust. / 7. Damage caused by disassembly. / 8. Deformation and damage caused by dropping or other similar incidents. / 9. Product failure due to wear and tear caused by the user. / 10.
Damage caused by use with other unrelated products.
Warranty
●For repairs, please contact the retailer where you purchased the product or Snow Peak Customer Service ●When you
request a repair, please make sure that the product is dry and clean. ●Please attach a memo or some kind of tag
indicating the needed repair and detail when and how the damage occurred. ●Shipping cost and repair fee for the repair
will be determined as follows. 1. Within warranty: Return shipping cost and repair fee will be covered by Snow Peak. /
2. Outside warranty: Return shipping cost and repair fee will be covered by the user.
Repair
Instruction Manual : Ver 1.00
WARNING
Snow Peak, Inc. 456, Nakanohara, Sanjo-Shi, Niigata 955-0147 Japan
Tel. +81 256-46-5858 Fax. +81 256-46-5860
www.snowpeak.co.jp
Snow Peak USA, Inc. 404 NW 23rd Avenue, Portland, Oregon 97210, USA
Tel. +1-503-697-3330 Instagram. @snowpeakusa www.snowpeak.com
