SNOWJOE SUNJOE 24V-XFP5-LTE-RM Bedienungsanleitung

A Division of Snow Joe®, LLC Model 24V-XFP5-LTE-RM Form No. SJ-24V-XFP5-LTE-RM-880E-M-V1

OPERATOR’S MANUAL

CORDLESS WATER TRANSFER PUMP

24V MAX* | 2.0 Ah | 330 GPH

SAVE THESE INSTRUCTIONS

A Division of Snow Joe®, LLC Model 24V-XFP5-LTE-RM Form No. SJ-24V-XFP5-LTE-RM-880E-M-V1

OPERATOR’S MANUAL

CORDLESS WATER TRANSFER PUMP

24V MAX* | 2.0 Ah | 330 GPH

SAVE THESE INSTRUCTIONS

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Any electrical appliance can be dangerous if used incorrectly.

Some of the safety precautions given in this manual apply

generally to many appliances. Other warnings are specic to

the use of this cordless transfer pump.

Always follow these safety guidelines. Failure to do so may

result in personal injury or property damage.

mWARNING! This unit can be dangerous! Careless or

improper use can cause serious injury.

General Safety

FOR HOUSEHOLD USE ONLY

Before using, be sure that everyone using this tool reads

and understands all safety instructions and other information

contained in this manual. Save this manual and review it

frequently prior to using this tool and when instructing

others on the proper operating procedures.

Before using the transfer pump, take the time to familiarize

yourself with the controls, especially how to stop the transfer

pump. The only individuals who should use the transfer

pump are those who have a thorough understanding of the

instructions and who know how to operate the machine.

Children should never be allowed access to the transfer pump.

Retain this manual for future reference.

mWARNING! Read all safety warnings, instructions,

illustrations and specications provided with the pump. Failure

to follow all instructions listed below may result in electric

shock, re and/or serious injury.

Work Area Safety

• Keep your work area clean and well lit. Cluttered

benches and dark areas invite accidents.

• Do not operate the product in explosive atmospheres,

such as in the presence of ammable liquids, gases, or

dust. Products create sparks which may ignite the dust or

fumes.

• Keep children and bystanders away while operating the

product. Distractions can cause you to lose control.

Personal Safety

• Do not overreach. Keep proper footing and balance at all

times. Proper footing and balance enable better control of

the product in unexpected situations.

• Do not use on a ladder or unstable support. Stable

footing on a solid surface enables better control of the

product in unexpected situations.

• Prevent unintentional starting. Ensure the switch is in the

o-position before inserting the battery pack, picking up or

carrying the tool. Carrying power tools with your nger on

the switch or energizing power tools that have the switch on

invites accidents.

• Stay alert, watch what you are doing and use common

sense when operating. Do not attempt to operate this

pump while you are tired or under the inuence of drugs,

alcohol or medication. A moment of inattention may result

in personal injury.

• Use the product only for its intended use as described in

this manual.

• If the product is not working properly, has been dropped,

damaged, left outdoors or dropped into water, contact

an authorized Snow Joe®+ Sun Joe®dealer or call

the Snow Joe®+ Sun Joe®customer service center at

1-866-SNOWJOE (1-866-766-9563) for assistance.

• Only use attachments and accessories specied by the

manufacturer.

Transfer Pump Use and Care

mCAUTION! The pump has been evaluated for use

with water only. Do not use with acids, alkalines, solvents,

ammable material, gasoline or petroleum products, bleaches,

or industrial grade solutions. These products can cause

physical injuries to the operator and irreversible damage to the

pump.

• Do not use the pump if the switch does not turn it on

and o. Any tool cannot be controlled with the switch is

dangerous and must be repaired.

• Remove the battery before making any adjustments,

changing accessories, or storing the product. Such

preventive safety measures reduce the risk of starting the

product accidentally.

• Release the pressure and drain water from pump before

servicing.

• Keep handles and grasping surfaces dry, clean and free

from oil and grease. Slippery handles and grasping surfaces

may result in lose of handling and control of the tool in

unexpected situations.

• Clean with only dry cloth.

• Do not operate near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

ampliers) that produce heat.

• Do not remove hose while pump is still operating.

• Do not put any objects in ventilation openings. Do

not use the product with any opening blocked.

Keep

openings free of dust, lint, hair and anything that may

reduce air ow.

•

Maintain pump and accessories. Check for misalignment or

binding of moving parts, breakage of parts and any other

condition that may aect the pump’s operation. If damaged,

have the pump repaired before use. Accidents can be

caused by a poorly maintained pump.

Electric Safety

mWARNING! Read all safety warnings and instructions.

Failure to follow the warnings and instructions may result in

electric shock, re and/or serious injury.

1. Recharge only with the charger specied by the

manufacturer. A charger that is suitable for one type of

battery pack may create a risk of re when used with

another battery pack.

2. Use appliances only with specically designated battery

packs. Use of any other battery packs may create a risk of

injury and re.

3. When the battery pack is not in use, keep them away

from other metal objects, like paper clips, coins, keys,

nails, screws or other small metal objects, that can make

a connection from one terminal to another. Shorting the

battery terminals together may cause burns or a re.

4. Under abusive conditions, liquid may be ejected from

the battery; avoid contact. If contact accidentally occurs,

ush with water. If liquid contacts eyes, additionally seek

medical help. Liquid ejected from the battery may cause

irritation or burns.

5. Do not use a battery pack or appliance that is damaged

or modied. Damaged or modied batteries may exhibit

unpredictable behavior resulting in re, explosion or risk of

injury.

6. Do not expose a battery pack or appliance to re or

excessive temperature. Exposure to re or temperature

above 104°F(40.5°C) may cause explosion.

7. Follow all charging instructions and do not charge the

battery pack or appliance outside of the temperature

range specied in the instructions. Charging improperly

or at temperatures outside of the specied range may

damage the battery and increase the risk of re.

8. Do not modify or attempt to repair the appliance or the

battery pack (as applicable) except as indicated in the

instructions for use and care.

Transfer Pump Safety Warnings

1. Know your product. Read operator’s manual carefully.

Learn its applications and limitations, as well as the

specic potential hazards related to this product.

Following this rule will reduce the risk of electric shock,

re, or serious injury.

Do not allow children to operate the product or play with

the product as a toy. Close attention is necessary when

used near children.

3. Do not let the pump run dry.

4. Do not lift the pump by hoses.

5. Periodically inspect the pump and the hoses. Ensure

hoses are free from mud, sand and debris.

Disconnect

the battery before inspecting.

6. This pump has been evaluated for use with water only

7. The pump is not submersible.

8. Risk Of Electric Shock – this pump has not been

investigated for use in swimming pool or marine areas.

9. This pump is thermally protected.

10.

Battery tools do not have to be plugged into an electrical

outlet; therefore, they are always in operating condition.

Be aware of possible hazards when not using your battery

tool or when changing accessories. Following this rule will

reduce the risk of electric shock, re, or serious personal

injury.

11. Do not place the product or its batteries near re or

heat.

This will reduce the risk of explosion and possibly

injury.

12. Do not crush, drop or damage battery pack. Do not use a

battery pack or charger that has been dropped or received

a sharp blow. A damaged battery is subject to explosion.

Properly dispose of a dropped or damaged battery

immediately.

13. Batteries can explode in the presence of a source

of ignition, such as a pilot light. To reduce the risk of

serious personal injury, never use any cordless product

in the presence of open ame. An exploded battery can

propel debris and chemicals. If exposed, ush with water

immediately.

14. Do not charge battery tool in a damp or wet location. Do

not use, store, or charge battery packs or products in

locations where the temperature is less than 41°F or more

than 105°F. Do not store outside or in vehicles.

15. Do not incinerate the battery even if it is severely

damaged. The batteries can explode in a re.

16. To reduce the risk of re or electric shock, do not use this

product with any solid-state speed control device.

17. To reduce the risk of personal injury and electric shock,

the product should not be played with or placed where

small children can reach it.

18. To reduce the risk of electric shock, do not expose to

water or rain.

19. Not for potable water or other potable liquids.

20.

Do not pump water with a temperature over 104°F (40°C).

Do not pump sand, particulate, or large debris. Damage to

the pump will occur.

21.

Do not allow this pump to operate unattended. Failure to

follow this warning could result in personal injury.

22.

Do not pump water from a creek, pond, or source where

foreign objects may be sucked into the pump. Solids may

enter the inlet hose.

23.

Secure the discharge hose before starting the pump.

An unsecured discharge hose may whip. Personal injury

and/or death could result.

Service

1. Have servicing performed by a qualied repair person

using only identical replacement parts. This will ensure

that the safety of the product is maintained.

2. When servicing the product, use only identical

replacement parts. Follow instructions in the Maintenance

section of this manual. Use of unauthorized parts or failure

to follow Maintenance Instructions may create a risk of

shock or injury.

Battery + Charger

Safety Instructions

We pay a great deal of attention to the design of every battery

pack to ensure that we supply you with batteries that are safe,

durable and have a high energy density. The battery cells have

a wide range of safety devices. Each individual cell is initially

formatted and its electrical characteristic curves are recorded.

This data is then used exclusively to be able to assemble the

best possible battery packs.

Despite all the safety precautions, caution must always be

exercised when handling the battery. The following points must

be obeyed at all times to ensure safe use. Safe use can only

be guaranteed if undamaged cells are used. Incorrect handling

of the battery pack can cause cell damage.

IMPORTANT! Analyses conrm that incorrect use and poor

care of high-performance batteries are the main factors

responsible for personal and/or product damage.

mWARNING! Use only approved replacement batteries;

other batteries may damage the cordless transfer pump and

cause it to malfunction, which can lead to serious personal

injury.

mWARNING! Do not use a battery pack or appliance that

is damaged or modied. Damaged or modied battery may

exhibit unpredictable behavior resulting in re, explosion or risk

of injury.

Do not modify or attempt to repair the appliance or the battery

pack except as indicated in the instructions for use and care.

Have your battery pack serviced by a qualied repair person

using only identical replacement parts. This will ensure that the

safety of the battery pack is maintained.

mCAUTION! To reduce the risk of injury, charge the 24V

iON+ lithium-ion battery pack only in the designated 24V iON+

lithium-ion charger. Other types of chargers present risk of re,

personal injury and damage. Do not wire the battery pack to

a power supply plug or car cigarette lighter. Such misuse will

permanently disable or damage the battery pack.

• Avoid dangerous environments – Do not charge the

battery pack in rain, snow or in damp or wet locations.

Do not use the battery pack or charger in the presence of

explosive atmospheres (gaseous fumes, dust or ammable

materials) because sparks may be generated when

connecting or disconnecting the battery pack, which could

lead to a re.

• Charge in a well-ventilated area – Do not block the

charger vents. Keep them clear to allow for proper

ventilation. Do not allow smoking or open ames near a

charging battery pack. Vented gases may explode.

NOTE: The safe temperature range for the battery is 41°F –

105ºF (5°C – 40.5°C). Do not charge the battery outside in

freezing weather; charge it at room temperature.

• Maintain charger cord – When unplugging the charger, pull

the plug, not the cord, from the receptacle to reduce the

risk of damage to the electrical plug and cord. Never carry

the charger by its cord or yank it by the cord to disconnect

it from the receptacle. Keep the cord away from heat, oil

and sharp edges. Make sure the cord will not be stepped

on, tripped over or subjected to damage or stress when the

charger is in use. Do not use the charger with a damaged

cord or plug. Replace a damaged charger immediately.

• Do not use an extension cord unless it is absolutely

necessary – Using the wrong, damaged or improperly

wired extension cord poses a risk of re and electric shock.

If an extension cord must be used, plug the charger into a

properly wired 16 gauge or larger extension cord with the

female plug matching the male plug on the charger. Make

sure that the extension cord is in good electrical condition.

• Charger 24VCHRG-AC is rated for 100 – 240 volt AC

only – The charger must be plugged into an appropriate

receptacle.

• Use only recommended attachments – Use of an

attachment not recommended or sold by the battery

charger or battery pack manufacturer may result in risk of

re, electric shock or personal injury.

• Unplug charger when not in use – Make sure to

disconnect battery pack from unplugged charger.

mWARNING! To reduce the risk of electric shock,

always unplug the charger before performing any cleaning

or maintenance. Do not allow water to ow into the charger.

Use a Ground Fault Circuit Interrupter (GFCI) to reduce shock

hazards.

• Do not burn or incinerate battery pack – Battery pack

may explode, causing personal injury or damage. Toxic

fumes and materials are created when the battery pack is

burned.

• Do not crush, drop or damage battery pack – Do not use

the battery pack or charger if they have sustained a sharp

blow, been dropped, run over or have been damaged in any

way (i.e. pierced with a nail, hit with a hammer, stepped on,

etc.).

• Do not disassemble – Incorrect reassembly may pose

a serious risk of electric shock, re or exposure to toxic

battery chemicals. If the battery or charger are damaged,

contact an authorized Snow Joe®+ Sun Joe®dealer or

call the Snow Joe®+ Sun Joe®customer service center at

1-866-SNOWJOE (1-866-766-9563) for assistance.

• Battery chemicals cause serious burns – Never let a

damaged battery pack contact the skin, eyes or mouth.

If a damaged battery pack leaks battery chemicals, use

rubber or neoprene gloves to safely dispose of it. If skin

is exposed to battery uids, wash the aected area with

soap and water and rinse with vinegar. If eyes are exposed

to battery chemicals, immediately ush with water for 20

minutes and seek medical attention. Remove and dispose

of contaminated clothing.

• Do not short circuit – A battery pack will short circuit if

a metal object makes a connection between the positive

and negative contacts on the battery pack. Do not place a

battery pack near anything that may cause a short circuit,

such as paper clips, coins, keys, screws, nails and other

metallic objects. A short-circuited battery pack poses a risk

of re and severe personal injury.

• Store your battery pack and charger in a cool, dry

place – Do not store the battery pack or charger where

temperatures may exceed 105ºF (40.5ºC), such as in direct

sunlight or inside a vehicle or metal building during the

summer.

Information about the battery

1. The battery pack supplied in your cordless transfer pump

is only partially charged. The battery pack has to be

charged completely before you use the tool for the rst

time.

2. For optimum battery performance, avoid low discharge

cycles by charging the battery pack frequently.

3. Store the battery pack in a cool place, ideally at 77°F

(25°C) and charged to at least 40%.

4. Lithium-ion batteries are subject to a natural aging

process. The battery pack must be replaced at the latest

when their capacity falls to just 80% of its capacity when

new. Weakened cells in an aged battery pack are no

longer capable of meeting the high power requirements

needed for the proper operation of your cordless transfer

pump, and therefore pose a safety risk.

5. Do not throw the battery pack into an open re as this

poses a risk of explosion.

6. Do not ignite the battery pack or expose it to re.

7. Do not exhaustively discharge the battery. Exhaustive

discharge will damage the battery cells. The most

common cause of exhaustive discharge is lengthy storage

or non-use of partially discharged battery. Stop working as

soon as the performance of the battery fall noticeably or

the electronic protection system triggers. Place the battery

pack in storage only after it has been fully charged.

8. Protect the battery and the tool from overloads. Overloads

will quickly result in overheating and cell damage inside

the battery housing even if this overheating is not apparent

externally.

9. Avoid damage and shocks. Immediately replace the

battery that has been dropped from a height of more

than one meter or has been exposed to violent shocks,

even if the housing of the battery pack appears to be

undamaged. The battery cells inside the battery may have

suered serious damage. In such instances, please read

the waste disposal information for proper battery disposal.

10. If the battery pack suers overloading and overheating,

the integrated protective cuto will switch o the

equipment for safety reasons.

IMPORTANT! Do not press the ON/OFF switch any more

if the protective cut-o has been activated. This may

damage the battery pack.

11. Use only original battery pack. The use of other batteries

poses a re risk and may result in injuries or an explosion.

Information about the charger and the

charging process

1. Please check the data marked on the rating plate of the

battery charger. Be sure to connect the battery charger

to a power supply with the voltage marked on the rating

plate. Never connect it to a dierent mains voltage.

2. Protect the battery charger and its cord from damage.

Keep the charger and its cord away from heat, oil and

sharp edges. Have damaged cords repaired without delay

by a qualied technician at an authorized Snow Joe®+

Sun Joe®dealer or call the Snow Joe®+ Sun Joe®

customer service center at 1-866-SNOWJOE

(1-866-766-9563).

3. Electrical plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs with

grounded appliances. Unmodied plugs and matching

outlets will reduce the risk of electric shock.

4. Keep the battery charger, battery pack and the cordless

tool out of the reach of children.

5. Do not use the supplied battery charger to charge other

cordless tools.

6. During periods of heavy use, the battery pack will become

warm. Allow the battery pack to cool to room temperature

before recharging.

7. Do not overcharge the battery. Do not exceed the

maximum charging times. These charging times only apply

to discharged batteries. Frequent connection of a charged

or partially charged battery pack will result in overcharging

and cell damage. Do not leave the battery connected with

the charger for days on end.

8. Never use or charge battery if you suspect that it has

been more than 12 months since the last time they were

charged. There is a high probability that the battery pack

has already suered dangerous damage (exhaustive

discharge).

9. Charging the battery at a temperature below 41°F (5°C)

will cause chemical damage to the cells and may cause a

re.

10. Do not use batteries that have been exposed to heat

during the charging process, as the battery cells may have

suered dangerous damage.

11. Do not use the battery if it suered curvature or

deformation during the charging process or exhibit other

atypical symptoms (gassing, hissing, cracking, etc.).

12. Never fully discharge the battery pack (maximum

recommended depth of discharge is 80%). A complete

discharge of the battery pack will lead to premature aging

of the battery cells.

Protection from environmental inuences

1. Wear suitable work clothes. Wear safety goggles.

2. Protect your cordless tool and the battery charger

from moisture and rain – Moisture and rain can cause

dangerous cell damage.

3. Do not use the cordless tool or the battery charger near

vapors and ammable liquids.

4. Use the battery charger and cordless tools only in dry

conditions and at an ambient temperature of 41ºF – 105°F

(5°C – 40.5°C).

5. Do not keep the battery charger in places where the

temperature is liable to reach over 105°F (40.5°C). In

particular, do not leave the battery charger in a car that is

parked in the sunshine.

6. Protect batteries from overheating. Overloads,

overcharging and exposure to direct sunlight will result

in overheating and cell damage. Never charge or work

with batteries that have been overheated – replace them

immediately, if possible.

7. Store the charger and your cordless tool only in dry

locations with an ambient temperature of 41ºF – 105°F

(5°C – 40.5°C). Store your lithium-ion battery packs in a

cool, dry place at a temperature of 77°F (25°C). Protect

the battery pack, charger and cordless tool from humidity

and direct sunlight. Only place fully charged batteries in

storage (charged to at least 40%).

8. Prevent the lithium-ion battery pack from freezing. Battery

packs that were stored below 32°F (0°C) for more than

60 minutes must be discarded.

9. When handling the battery, be wary of electrostatic

charge. Electrostatic discharges can damage the

electronic protection system and the battery cells. Avoid

electrostatic charging and never touch the battery poles.

Safety Symbols

The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all

instructions on the machine before attempting to assemble and operate.

READ THE OPERATOR'S

MANUAL(S) – Read, understand,

and follow all instructions in the

user manual(s) before attempting

to assemble and operate.

SAFETY ALERT – Indicates a

precaution, a warning, or a danger.

WARNING! Do not expose the

unit to rain or wet conditions.

Keep dry.

WARNING! Electrical shock hazard.

Symbols SymbolsDescriptions Descriptions

Store indoors. Never store the transfer pump outdoors.

If the pump freezes, permanent damage may result.

Know Your Cordless Transfer Pump

Read the owner’s manual and safety instructions carefully before operating the cordless transfer pump. Compare the illustration

below to the cordless transfer pump in order to familiarize yourself with the location of the various controls and adjustments.

Save this manual for future reference.

1. Battery compartment cover

2. Battery compartment

3. Motor housing

4. Oil bottle

5. Base

6. Charge socket

7. 24V iON+ lithium-ion battery

(24VBAT-LTE) featuring exclusive

EcoSharp®technology

8. 24V iON+ lithium-ion charger

(24VCHRG-AC)

9. Charger plug

10. Push-button for battery power

status

11. Battery power indicators

12. Puddle strainer

13. Intake hose

14. Water inlet

15. Impeller cover plate

16. Water outlet

17. Flow direction indicator

18. LED indicator

19. Handle

20. On/O switch

5 6

1011

16 17

19 20

Technical Data

Battery Voltage*....................................

24 V D.C.

Battery Capacity

..................................

2.0 Ah

Battery Run Time Max

..........................

20 min

Charger Input

........................................

100 – 240 V AC,

50 - 60 Hz, 50 W

Charger Output

.....................................

25.2 V DC

1.4 A

Charge Time Max .................................

80 min

Motor

....................................................

150 W

Max Water Inlet Temperature ...............

104ºF/40ºC

Intake Hose Length ..............................

5.9 ft (1.8 m)

Max Flow Rate .....................................

330 GPH

Max Head Height .................................

52 ft (15.8 m)

Max Suction Lift

...................................

13 ft (4 m)

Fittings ..................................................

3/4" GHT male

Enclosure ..............................................

Type 2

Weight (unit only) ..................................

4 lbs (1.9 kg)

Weight (with battery installed) ..............

5 lbs (2.3 kg)

* Initial no-load voltage, when fully charged, peaks at 24 volts; nominal voltage

under typical load is 21.6 volts.

Unpacking

Carton Contents

• Cordless transfer pump

• Puddle strainer

• Intake hose

• Oil bottle

• M5 tapping screws (4)

• 24V iON+ lithium-ion battery

• 24V iON+ lithium-ion charger

• Manuals with registration card

1. Carefully remove the transfer pump and check to see that

all of the above items are supplied.

2. Inspect the product carefully to make sure no breakage or

damage occurred during shipping. If you nd damaged or

missing parts, DO NOT return the unit to the store. Please

call the Snow Joe®+ Sun Joe®customer service center at

1-866-SNOWJOE (1-866-766-9563).

NOTE: Do not discard the shipping carton and packaging

material until you are ready to use your new cordless

transfer pump. The packaging is made of recyclable

materials. Properly dispose of these materials in

accordance with local regulations.

IMPORTANT! The equipment and packaging material are

not toys. Do not let children play with plastic bags, foils,

or small parts. These items can be swallowed and pose a

suocation risk!

mWARNING! Do not insert battery until assembly is

complete. Failure to comply could result in accidental starting

and possible serious personal injury.

Battery Pack Operation

The equipment is powered by a lithium-ion battery. The battery

pack is completely sealed and maintenance free.

Battery Charge Level Indicator

The battery pack is equipped with a push button for checking

the charge level. Simply press the push button to read o the

battery charge level from the LEDs of the battery indicator:

• All 3 level monitoring LEDs are lit: Battery charge level

is high.

• 2 level monitoring LEDs are lit: Battery charge level is

decreasing. Stop work as soon as possible.

• 1 level monitoring LED is lit: Battery is at. Stop work

IMMEDIATELY and charge the battery. Otherwise the

battery’s service life will be greatly shortened.

NOTE: If the charge level button does not appear to be

working, connect to the charger and charge as needed.

NOTE: Immediately after using the battery pack, the charge

level button may display a lower charge than it will if checked

a few minutes later. The battery cells “recover” some of their

charge after resting.

Charger Operation

mWARNING! Charge only 24V iON+ lithium-ion battery

pack with its compatible 24V iON+ lithium-ion charger. Other

types of batteries may cause personal injury and damage.

To reduce the risk of electric shock, do not allow water to ow

into the charger's AC/DC plug.

Charge level button

The battery is at 30% capacity

and requires charging

The battery is at 60% capacity

and requires charging soon

The battery is at full capacity

Light IndicatorsLights

When to Charge the iON+ 24VBAT-LTE

Lithium-iON Battery

NOTE: The iON+ 24VBAT-LTE lithium-iON battery pack does

not develop a "memory" when charged after only a partial

discharge. Therefore, it is not necessary to run down the

battery pack before inserting the charger plug.

• Use the battery indicator lights to determine when to charge

your iON+ 24VBAT-LTE lithium-iON battery pack.

• You can "top-o" your battery pack's charge before starting

a big job or after a long day of use.

Charging the Battery

1. Open the battery compartment cover, and push the push

lock buttons to pull both the battery pack out from the

battery compartment (Fig. 1).

2. Check that the mains voltage is the same as that marked

on the rating plate of the battery charger. Then, plug the

charger adapter into an appropriate AC power outlet.

Connect the charger plug into the charge socket of the

battery to start charging (Fig. 2).

3. The battery will take approximately 80 minutes to charge.

The battery indicator LEDs will twinkle and illuminate one

by one during the charging process. Unplug the charger

immediately when the 3 LEDs are all illuminated.

mCAUTION! FIRE HAZARD. When disconnecting the

charger from the battery, be sure to unplug the charger from

the outlet rst, then disconnect the charger from the battery.

mWARNING! This charger does not automatically

turn o when the battery is fully charged. Please take care

not to leave the battery plugged into the charger. Switch

o or unplug the charger at the mains when charging is

complete.

4. Timely recharging of the battery will help prolong the

battery's life. You must recharge the battery pack when

you notice a drop in the equipment's power.

IMPORTANT! Never allow the battery pack to become fully

discharged as this will cause irreversible damage to the

battery.

Assembly

mWARNING! Do not insert the battery before the unit is

fully connected with hoses and ready for use.

1. The equipment comes fully assembled. If needed, fasten

it securely to a suitable surface (e.g., a work-bench) in a

suitable place (protected against dust, dry, well-lit) with

the 4 provided M5 tapping screws (Fig. 3). Otherwise,

place the pump on a level, dry surface securely.

2. Connect a discharge hose onto the water outlet. It's

recommended to use a garden hose with standard 3/4"

GHT female connector. Thread to secure (Fig. 4).

Fig. 1

Battery

compartment

cover Battery pack

Push lock

button

Fig. 2

Battery

indicators

Fig. 3

Base Screws

Inhaltsverzeichnis

Andere SNOWJOE Wasserpumpe Handbücher

SNOWJOE

SNOWJOE SUNJOE 24V-XFP5-CT-RM Bedienungsanleitung

Beliebte Wasserpumpe Handbücher anderer Marken

Neptun

Neptun NPHW 5500 Bedienungsanleitung

Sensidyne

Sensidyne Gilian BDX-II Montage- und Bedienungsanleitung

Draper

Draper 47808 Bedienungsanleitung

Trolla

Trolla 12820 Bedienungsanleitung

Sunfab

Sunfab SVH Series Bedienungsanleitung

WilTec

WilTec 50740 Bedienungsanleitung

Fieldmann

Fieldmann FVC 5015 EK Bedienungsanleitung

Everbilt

Everbilt EFSUB5-122HD Bedienungsanleitung

Graco

Graco Husky 3300e Bedienungsanleitung

esotec

esotec 101018 Bedienungsanleitung

Becker

Becker BASIC VASF 2.80/1-0.AC230 Bedienungsanleitung

Sykes AmeriPumps

Sykes AmeriPumps GP100M Fehlerbehebungshandbuch

DUROMAX

DUROMAX XP WX Series Bedienungsanleitung

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Bedienungsanleitung

Franklin Electric

Franklin Electric IPS Bedienungsanleitung

Xylem

Xylem e-1532 Series Bedienungsanleitung

Milton Roy

Milton Roy PRIMEROYAL Bedienungsanleitung

STA-RITE

STA-RITE ST33APP Bedienungsanleitung