Socket QX Stand Bedienungsanleitung
QX Stand SKU# AC4076-1538 P/N 9010-01538
ATTACHABLE
QX Stand
QUICK START GUIDE
USB Charging CableQX Stand AC Adapter
*Use the plug that is region-
ally appropriate
© 2015 Socket Mobile, Inc. All rights reserved. Socket, the Socket logo, and Sock-
etScan are registered trademarks or trademarks of Socket Mobile, Inc. The Blue-
tooth word mark and logo are registered trademarks of the Bluetooth SIG, Inc.
USA, and any use by Socket Mobile, Inc. is under license. All other trademarks
and trade names contained herein may be those of their respective owners.
Thank you for choosing Socket Mobile!
Let’s get started!
Magnet
Hook
*Illuminates Red when connected to AC Power.
Charging Pins
LED*
PRODUCT INFORMATION
or
3
PACKAGE CONTENTS
A. Flip the holder upside down and insert the cushion crown into the
bottom of the holder.
B. Insert the post into the bottom of the holder.
C. Turn the washer to the right until it is locked in place.
A. Holder
B. Base
C. Post
D. Micro USB (2m)
E. Cushion Crown
F. Pem Cap / Camera Mount*
G. Wood Screws (2)**
A.
C.
D.
F.
G.
E.
B. (Front view)
B. (Bottom view)
A.
B.
C.
ASSEMBLY OVERVIEW CONNECTING THE SCANNER HOLDER TO THE POST
54
*Optional for Camera Mount (See page 14)
**Optional for table mount (see page 12)
Insert Micro USB from under the base.
A. Remove Micro USB cover.
B. Insert Micro USB connector into port and t usb
cable into the cord keeper.
C. Leave enough slack to allow freedom of
movement. Place cover.
A.
B.
C.
Base (Top View)
Base (Bottom View)
Front
Back
INSERTING THE USB CABLE THROUGH THE BASE UNIT CONNECTING THE USB CABLE TO THE HOLDER
76
Insert the post into the top of the base lining up the marker on the post
to the unlock icon. Push down and turn the post towards the lock icon
until you hear a click.
1. To unlock, nd the small
latch on the bottom of the
base.
2. Pull the latch back and turn
the post clockwise aligning
the marker with the unlock
icon.
Small latch
Base (Bottom View)
CONNECTING THE SCANNER HOLDER TO THE POST HOW TO UNLOCK
98
4-6 inches
(10 - 15 cm)
QX STAND OPERATIONSQX STAND OPERATIONS
When charging the scanner, make
sure the charging pins on the
stand and the scanner make con-
tact with each other and the red
LED on the stand is illuminated.
1110
*CHS 7Qi & 7Xi only
“Beep
Beep”*
OPTIONAL QX STAND TABLE MOUNT OPTIONAL QX STAND TABLE MOUNT (CONTINUED)
12 13
Two keyholes are provided on the QX Stand Base for an optional instal-
lation on a wooden surface using the included screws (quantity 2) and
Drill Template.
1. Place the QX Stand on the Drill Template and situate these onto the
desired location of your surface. Rotate the Stand so that it aligns
with the solid Notch (not the dotted Notch) on the Template.
2. Rotate the Stand/Template combination so the Socket Mobile logo
faces in the direction you want the scanner to face.
3. Tape the Template to the surface and remove the Stand.
4. Drill two 3/32” holes through the drill marks on the Template.
5. Tighten the two screws with about 1/4” of the screw head exposed.
6. Place the Stand on the template aligned with the dotted Notch.
7. You can now remove (tear away) the Template.
8. Twist the Stand clockwise so the screws lock into the keyholes.
Magnet Magnet
Magnet Command Barcode
“Auto Mode”
Keyholes
Notch
OPTIONAL CONFIGURATION WHEN USING A CAMERA MOUNT
A. Attach the Pem cap
to your Camera Mount
(1/4” - 20 x 3/4”
thread) and turn to the
right.
B. Attach the holder to
the Pem cap
A.
B.
14
COMMAND BARCODES
QX Stand Modes
Mobile Mode - Normal (default)* Scanning
this bar code will enable the scanner to
enter mobile mode. It will always be in
manual trigger mode even when placed in
the stand or cradle.
*Scanner Factory Reset returns to Mobile
Mode. #FNB 41FBA50000#
Auto Mode (Presentation Mode)
Scanning this bar code will enable the
scanner to enter auto mode. When the
scanner is in auto mode, it will switch to
presentation trigger mode when it de-
tects power on the cradle pins. When the
scanner is removed from the cradle it will
remain in presentation trigger mode until
the users presses the trigger. At that point
it will switch to normal manual trigger
mode. Auto Mode command barcode is also
printed on the product label.
#FNB 41FBA50003#
15
AUTO MODE AUTO MODE (CONTINUED)
16 17
Action Behavior Notication
Beep Pattern LED Activity Vibrate
Place Scanner
in the Stand
Scanner
switches to
Presentation
Mode
High-high tone
conrms proper
seating*
Battery Status
LED is Disabled
None
Place a barcode
in the Scanners
Field of View
Decode Bar
Code
1 Beep when
Data success-
fully scanned
Green LED
blinks (while
scanning)
None
Action Behavior
Notication
Beep Pattern LED Activity Vibrate
Remove the
Scanner from
the Stand and
press the Trig-
ger button
Scanner
switches to
Mobile Mode
None Battery Status
LED is Enabled
Enabled
Press the Trig-
ger button
Decode Bar
Code
1 Beep when
Data success-
fully scanned
Green LED
blinks (while
scanning)
Vibrate when
Data success-
fully scanned
Presentation Mode: Bar Codes placed in the Scanner’s eld of view are automatically scanned.
Mobile Mode: Pressing the Trigger button initiates a scan.
*Note: 7Qi/7Xi will beep High-high tone even if the Scanner is Power Off (to indicate charging)
Auto Mode (In the Stand)
Mobile Mode (Not in the Stand)
1. Pair and connect the 7Qi/7Xi to your device prior to placing the scan-
ner in Auto Mode. The Scanner is not discoverable when in Auto Mode
and in the Stand. This facilitates a fast connection to the current
connected device when powered on (for example the start of the
new business day).
2. The Trigger button must be pressed to disable Presentation Mode
(and enable Mobile Mode) after the scanner is removed from the
Stand.
3. The Scanner will not turn off when its in Presentation Mode and in
the Stand under AC Power.
4. To avoid excessive power drain, the scanner should not be left out of
the Stand in Auto Mode. Either press the Trigger button or Power off
the scanner.
PRODUCT SPECIFICATIONS
Dimensions
Stand Height 8.75 in (222 mm)
Holder Width 1.80 in (46 mm)
Holder Length 5.50 in (140 mm)
Base Diameter 5.75 in (146mm)
Total Weight
Without Scanner and AC Adapter 16 oz (454 g)
With Scanner and without AC Adapter 17.6 oz (500 g)
Antimicrobial Rating JLS z2801:2000 Test:
2.49 on MRSA 6.07 when
cleaned with SaniCloth
Plus cloth wipes Biosafe
HM4100, EPA#83019-1
18
Technical Support & Product Registration:
http://support.socketmobile.com
Phone: 800-279-1390 +1-510-933-3020 (worldwide)
Warranty Checker:
http://warrantychecker.socketmobile.com/
Socket Mobile Developer Program:
Learn more at: http://developer.socketmobile.com
Series 7 User’s Guide (full installation and usage instructions) and Com-
mand Barcodes (Advanced Scanner Congurations) can be download at:
http://www.socketmobile.com/docs/default-source/series-7/chs-2d-
user’s-guide.pdf?sfvrsn=0
This web link is also provided in the below QR Code. To open the
web page, scan this QR Code using a QR Code Reader App.
HELPFUL RESOURCES
19
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Socket Rack & Stand Handbücher
Beliebte Rack & Stand Handbücher anderer Marken
Salamander
Salamander Acadia AC/W/L400/WH Bedienungsanleitung
Fohhn
Fohhn VAT-09 Benutzerhandbuch
ricoo
ricoo FS0522 Bedienungsanleitung
AMSOIL
AMSOIL BMK-22 Kurzanleitung
Kargo Master
Kargo Master 48220 Bedienungsanleitung
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung
