Soehnle 2761 Bedienungsanleitung
2761
Getting Started and
Operating Instructions
470.620.022 Printed in Germany 2/1998
Subject to technical modifications
_Getting started
1
Set up the weighing platform at the
place required
Use the water level and the adjustable
feet to ensure that the scale is positioned
horizontally.
Fit the indicator or mount on the wall
using the bracket provided.
Connect the device to the mains
The scale is ready for use
The order in which the scales can
be connected
Space for fuse stamp
Serial number
Weighing range (weighing ranges
in the case of multi-range scales)
Range permitted for calibrated
weighing
Calibration value (graduation)
Serial number (scales type, last
digits of year of manufacture,
number).
EU conformity symbol with year
applied
D93-09-155 precision class, no.
of EU admission.
Code of the office quoted
Sign for EU admission
SNR
97
On - Off
Switch on (only when the scales are not
loaded)
After the test routine, the main display is
set to zero.
The scales are ready for use.
Switching between the scales
Higher resolution (hold down the key)
Zero setting
Gross weight
Data-transmission (printer/EDP)
Switching between kg and lb
Enter organisational data
Component weighing
Tare
Switch
Add
Count
Delete input (digit by digit)
Minus sign or hyphen when entering
organisational data
Numeric keyboard with decimal point
(manual entry)
Load values to memory
Recall of stored values input of data
Cancel input of data, clear memory.
The command is executed when the
appropriate function key is pressed
_Using the scales
2
If you use the display consistently and logically, you will soon discover the uni-
versally powerful capacity of the scales. Many functions only require one push
of a button - memory functions are available with just a few frequently used
key sequences.
The clearly laid out keyboard is divided into blocks of keys:
Control keysFunction keys
Numerial keysCommand keys
Numerical keys
Function keys
Command keys
Control keys
An acoustic signal confirms that the
entry is correct
Incorrect entries are indicated by means
of five acoustic signals in swift sucession.
Please check that your entry is correct. If
necessary, cancel the command sequence
by pressing the ”CI” key.
Loading values
Loading the value which is in the secon-
dary display or which has been entered
manually using the numeric keyboard:
Press the ”Ld” command key.
Now enter the number of the memory in
which you wish to store the value.
Confirm your entry by pressing the
appropriate function key (in this case
”Tare”)
The procedure is the same for organisa-
tional data memory, limit value memory
and tare memory. The reference weight
memory is only available in counting
mode. Switch over if necessary.
Recall of stored value
Press the ”i” command key and the
number of the memory where the value
you want is stored. Please note that
reference weights can only be called in
counting mode.
Confirm your entry by pressing the
appropriate function key (in this case the
limit memory)
Tare memory values and (in counting
mode) reference weight memory values
are activated by pressing the function key
again (in this case the limit value memory).
Clear memory
Press the ”CI” command key. Then enter
the number of the memory you want to
clear.
Confirm your entry by pressing the
appropriate function key (in this case
Count). Simply overwriting the memory as
described under ”Loading values” also
deletes the current value.
3
The indicator 2761 has a wide range of memory options:
10 tare memories
3 memories for organisational data
3 memories for set points or limit values
in the weighing and counting mode
and in counting mode
40 reference weight memories
These memory options are operated by means of the
numeric keyboard manual entry
and for calling the relevant memory number
command keys for loading, calling and deleting
function keys for activating the function
_Display symbols main display
secondary display
4
Zero message
Standstill indication
Active range in the case of multi-range scales.
Percentage display
Empty message
Set points activated
Gross weighing
Net weighing
Tare display
When battery is used (accessories): charge level
Status switching and checking
Totals memory
Active scale
Components weighing active
We recommend optimising the reference weight
within this range (wait for idle indicator)
Gross weight
Tare
Reference weight
Reference weight memory
Set point/limit value memory
Memory for organisational data
Weight totalled memory
Quantity totalled memory
Component weighed totalled memory
Tare memory
K
K
If the tare weight is unknown
Determine the tare of the empty container
Scales are ready to perform net weighing
If necessary, clear the tare after unloading
the scale
If the tare weight is known
Place the filled container on the scale.
Enter the tare weight in kg using the
numeric keyboard.
Confirm your entry by pressing the ”T”
function key
The net weight is displayed
Displaying the tare weight
(in the secondary display)
Clearing the tare weight
The gross weight appears in the main
display.
Storing the tare weight
Loading the tare weight which has been
determined or which has been entered
using the numeric keyboard.
Press the ”Ld” command key
Then enter the number of the tare
memory in which you wish to store the
value (there are 10 tare memories (0...9)
available for each connected scale.
Confirm your entry by pressing the ”T”
function key.
If necessary, clear the tare after unloading
the scale.
Recalling a tare memory value
Clearing a tare memory value
Weighing using the tare memory
Place the filled container on the scale.
Then call the tare memory value.
If you press ”T” function key again, the
tare value will be transferred to the current
weighing. The net value appears in the
main display.
_Weighing with tare
5
_Totalling weights
6
Tare the container if necessary. Place the
items to be weighed on the scale.
Transfer the weight value to the totals
memory.
Take the items take weighed off the scale.
Clear the tare if necessary
If necessary, enter a new tare. Place the
next items to be weighed on the scale.
Transfer the weight value to the totals
memory, etc.
The same container must not be tared
again after totalling to prevent a second
totalling.
Value - including minus values can be
entered by means of the numeric keyboard.
Enter the value
Transfer the value to the totals memory.
Displaying the totals memory.
By houlding the ”+” key the net-, gross-,
tare-total are displayed cyclically in the
secondary display.
Clearing the totals memory
By houlding the ”+” key the net-, gross-,
tare-total are displayed cyclically in the
secondary display.
If a printer is connected the ”+” function
key and the ”CI/+” key combination
activate printing. Printing will take place
according to the printing format definition.
For more detailed information, see
”Printing”.
There is a totals memory available for each connected scale in weighing
mode.
_Weighing using the removal
method _*see component weighing
7
Place the filled container on the scale.
If the tare is known , enter it manually if
necessary and tare the weight.
If it is important to determine the
weight of the remainder:
Transfer the weight value to the totals
memory.
Press function key ”T”. The overall weight
appears as the tare weight on the
secondary display.
If parts of original number of pieces are
removed, this is displayed with a minus
sign in the main display.
Determining the remaining quantity
If you have transferred the overall weight
to the totals memory, you can determine
the remaining quantity by pressing the
”+” function key.
The main display returns to ”0” after the
”T” function key has been pressed.
Displaying the contents of the totals
memory
(in the secondary display)
Clearing the totals memory
Clear the tare value after removing the
items from the scale.
If a printer is connected the ”+” function
key and the ”CI/+” key combination
activate printing. Printing will take place
according to the printing format definition.
For more detailed information, see
”Printing”.
When weighing using the removal
method the tare sum and the gross
sum are not correct.
_Components weighing
8
Tare the container if necessary
Place the items to be weighed on the
scale.
Transfer the weight value to the
component weighing memory.
The K-mode is indicated by an arrow.
Place the next items to be weighed on
the scale. Transfer the weight value to
the commission memory, etc.
Place the next items to be weighed on
the scale. Transfer the weight value to
the commission memory, etc.
Organisational data (also with minus
sign) can be entered by the numeric
keyboard.
Enter value
Transfer to the component weighing
memory with „K“.
Displaying the commission memory and
the current number of the component
lying on the scale.
By holding the K-key the K-, gross- and
tare-total are displayed cyclically in the
secondary display.
Clear the total memory and exit the
component weighing function.
By holding the K-key the K-, gross- and
tare-total are displayed cyclically in the
secondary display.
If a printer is connected the ”K” function
key and the ”CI/K” key combination
activate printing. Printing will take place
according to the printing format definition.
For more detailed information, see
”Printing”.
Commissioning is only possible in weighing mode and on one set of scales
K
K
K
K
K
_Switching and checking
in the weighing mode
9
Set points (limit values) can only be set in weighing and counting mode. 3
memories for limit values are available for each connected scale: Entry must be
additive, i.e. the weight of first limit value should be added to the second.
Limit values affect the net weight.
Loading memory
Enter the value for the set point with the
numeric keyboard.
Press the ”Ld” command key, followed
by the number of the memory.
Confirm your entry by pressing the
function key.
Memories 2 and 3 are entered and
displayed in the same way.
Recalling of stored values
Press the ”i” command key and the
number of the memory containing the
value you require.
Confirm your entry with the ” ”
function key.
Weighing with limit values
Tare the container
Place the items to be weighed on the scale.
The relevant symbol goes out when the
appropriate set point/limit value reached.
Clearing memory
Press the ”CI” command key.
Now enter the number of the memory
you wish to delete.
Confirm your entry with the appropriate
function key. Simply overwriting the
memory as described under ”Loading the
memory” also deletes the current value.
Control weighing
Enter the upper and lower tolerance
weights as in ”Loading memory” in S1
and S2. Place the items to be weighed on
the scales. The current weight value and
the tendency symbol appear on the main
display:
Weight is less than set value ”S1”
Weight is within the tolerance ”S1-S2”
Weight is greater than set value ”S2”
Inhaltsverzeichnis
Andere Soehnle Skala Handbücher
Soehnle
Soehnle 9055 Bedienungsanleitung
Soehnle
Soehnle 6803 Bedienungsanleitung
Soehnle
Soehnle CWC 7746 Bedienungsanleitung
Soehnle
Soehnle Body Balance Comfort F5 Bedienungsanleitung
Soehnle
Soehnle KSD PLATEAU Bedienungsanleitung
Soehnle
Soehnle STATIVWAAGE 7730 Bedienungsanleitung
Soehnle
Soehnle Easy Shape Bedienungsanleitung
Soehnle
Soehnle 7850 Bedienungsanleitung
Soehnle
Soehnle KWD Page Comfort 100 Bedienungsanleitung
Soehnle
Soehnle body fat monitor Bedienungsanleitung
Soehnle
Soehnle Shape Sense Control 200 Bedienungsanleitung
Soehnle
Soehnle Professional 8320 Bedienungsanleitung
Soehnle
Soehnle 9202 Bedienungsanleitung
Soehnle
Soehnle CWE 7745 Bedienungsanleitung
Soehnle
Soehnle Style Sense Multi 200 Bedienungsanleitung
Soehnle
Soehnle FT 4 Bedienungsanleitung
Soehnle
Soehnle 6803 Bedienungsanleitung
Soehnle
Soehnle 7850.02 Bedienungsanleitung
Soehnle
Soehnle 65843 Bedienungsanleitung
Soehnle
Soehnle Body Balance Shape F4 Bedienungsanleitung
