Soehnle 6958 Bedienungsanleitung

6958

Animal scale

User manual

www.soehnle-professional.com

Thank you for choosing this Soehnle Professional product.

Soehnle Professional is a brand of Soehnle Industrial Solutions GmbH.

This product is equipped with all features of the latest technology.

If you have any questions or if you have problems with your device that are not

covered in the operating instructions, please contact your Soehnle Industrial

Solutions service centre or our customer service.

Telephone: +49 7191 3453-220

Fax: +49 7191 3453-211

E-Mail: [email protected]bh

For further information and documentation please refer to:

https://www.soehnle-professional.com/en/site/documents

This manual has been written for the following models:

 Animal scale 6958.01.002

Please read this manual completely before installation and operation.

1. Scope of delivery ........................................................4

2. Warnings .................................................................. 4

3. General information ....................................................5

3.1 Technical Data .........................................5

3.2 Connection types.....................................6

4. Installation .......................................... .......................7

4.1 Unpacking and installation .......................7

5. Controls and functions ................................................9

5.1 Display unit and key descriptions..............9

 5.2Displaycharacterdenitions ....................10

5.3 Terminal display.......................................11

5.4 Meaning of symbols on faceplate.............11

6. Operation ................................................................12

6.1 Normal weighing mode.............................12

6.2 Count weighing mode ..............................14

6.3 Percent weighing mode............................15

6.4 BMI working mode ...................................17

6.5 HOLD function.........................................18

6.6 Accumulation ..........................................19

 6.7Weightne-tuning....................................20

7. Explanation of symbols & Troubleshooting....................21

7.1 Explanation of symbols ............................21

7.2 Troubleshooting.......................................22

Content

 Verify that the input voltage range printed on the data label matches the local

AC power to be used.

 Make sure that the power cord does not pose a potential obstacle or tripping

hazard.

 Use only approved accessories and peripherals.

 Operatetheequipmentonlyunderambientconditionsspeciedintheseins-

tructions.

 Disconnect the equipment from the power supply when cleaning.

 Do not operate the equipment in hazardous or unstable environments.

 Do not immerse the equipment in water or other liquids.

 Service should only be performed by authorized personnel.

1. Scope of delivery

2. Warnings

 Terminal 

 Platform 

 Power supply 

 User manual 

3. General information

3.1 Technical data

Max. display range -999,999to999,999

Max. display resolution 1:100,000(primaryunit)

1:125,000(secondunit)

Max. approved resolution 1:5,000

Division 0.0001,0.0002,0.0005to10,20,50

Calibration unit kg or lb

Weighing units g,lb,lb:oz,g,oz,pcs,%

Display 6-digit,7-segment,25mmheight

LCD with blue backlight

Accuracy ≤0.01%

Power supply 4x AA batteries

or AC adapter: 9V DC / 600 mA with central positive

Work current ≤15mA(backlightoff,noloadcells)

≤30mA(backlighton,noloadcells)

≤50mA(backlighton,oneloadcell)

Functions Normalweighing,counting,percentweighing,

checkweighing,BMI,Hold,Accumulation

Zero range programmable zero range

Tare range full capacity

Stabilization time < 3 seconds

Keypad [HOLD/SETUP],[PRINT/FUNC],[ACC/TOTAL],

[UNIT/DATA],[TARE/PRESET],[ZERO/ON/OFF]

Operating temperature -10°to40°C

Humidity range <90%relativehumidity,non-condensing

Load cell excitation voltage 5V DC

Load cell drive -3mV/Vto3mV/V

Recommended actual scale

interval (d)

> 1 uV / display division

Max. load cell excitation 60 mA

Signal connection 4 or 6 lead with sense leads

Real clock built-innonvolatilerealtime&date

Dimensions of scale 1.040,5x1.000mmperplatform

resp. 1.940 x 1.000 mm complete scale

Dimensions of terminal with bracket: 250 x 125 x 70 mm

without bracket: 200 x 95 x 45 mm

3.2 Connection types

7-pins socket, assigned as follows:

 Pin 1: Excitation + -

 Pin 2: Sense +

 Pin 3: Signal +

 Pin 4: Excitation -

 Pin 5: Sense -

 Pin 6: Signal -

 Pin 7: Shield 7 holes socket (Terminal) 7 pins socket (Base)

3. General information

4.1 Unpacking and installation

Caution:

Do not pull on the load cell cable and connectors during installation, as this may damage the parts.

1. Remove the two platforms 1 & 2 with the same serial number from the boxes and align them as shown

below. Remember to unplug the two connection cables and plugs on each platform..

2. Lift platform 1 as shown below and plug the connection cable of platform 2 into the connection socket on

the terminal box of platform 1.

4. Installation

3. Mount the mounting brackets as shown in the picture below to align two platforms. Note: It is

necessary that the two platforms are loosely connected.

4. Installation

4. Plug the connection cable of platform 1 into the connection socket on the display.

5.1 Display unit and key descriptions

Key Mode Description

HOLD/

SETUP

Weighing, counting

or percent mode

< 3 seconds Enters or exits HOLD mode

> 3 seconds Enters SETUP mode

Input data mode < 3 seconds Returns to last sub-menu

> 3 seconds Input decimal point

Menu selection mode Returns to last sub-menu

PRINT/

FUNC

Weighing, counting

or percent mode

< 3 seconds Sends output data via the serial port

> 3 seconds Selects mode: Weighing, counting or percent

Input data mode

Increases digit in ashing data entry position by one

Menu selection mode Returns to last item of current sub-menu

ACC/

TOTAL

Weighing, counting

or percent mode

< 3 seconds

Adds accumulation values to memory, displays

instances and totals

> 3 seconds Displays accumulation instances and totals

Input data mode

Decreases the digit in the ashing data entry position by 1

Menu selection mode Goes to the next item of current sub-menu

UNIT/

DATA

Weighing mode < 3 seconds Changes weighing unit of measure

Counting or

percent mode < 3 seconds Enters the submenu to input piece weight for counting

or to enter reference weight for percent-weighing

Weighing, counting

or percent mode

> 3 seconds Enters the submenu to input the comparative data

range for check-weighing

Time or date mode

> 3 seconds Enters time or date setting mode

Input data mode

Shifts the ashing data entry position from right to left

Display ADC code Select displaying code from no-lter, lter1, lter2

Menu selection mode Goes to next item of current sub-menu

TARE/

PRE-

SET

Weighing, counting

or percent mode

< 3 seconds Tare the weight

> 3 seconds Enters pre-determined tare input mode

Input data mode Conrms the input data and forwards to next step

Menu selection mode Conrms the input data and forwards to next step

ZERO/

ON-

OFF

Power Off Power On

Weighing, counting

or percent mode

< 3 seconds Zeros the platform weight

> 3 seconds Power off

Input data mode Ignores the modication

Menu selection mode Exits from current working mode

5. Controls and functions

5.2Displaycharacterdenitions

5. Controls and functions

Inhaltsverzeichnis

Andere Soehnle Skala Handbücher

Soehnle

Soehnle 9330 Bedienungsanleitung

Soehnle

Soehnle FT 4 Bedienungsanleitung

Soehnle

Soehnle 3020 Bedienungsanleitung

Soehnle

Soehnle 9115 Bedienungsanleitung

Soehnle

Soehnle 3700 BASIC Bedienungsanleitung

Soehnle

Soehnle Body Balance Slim F5 Bedienungsanleitung

Soehnle

Soehnle Professional 8320 Bedienungsanleitung

Soehnle

Soehnle Body Balance Shape F3 Bedienungsanleitung

Soehnle

Soehnle Comfort XXL Bedienungsanleitung

Soehnle

Soehnle 9202 Bedienungsanleitung

Soehnle

Soehnle 65070 Bedienungsanleitung

Soehnle

Soehnle Body Balance Milano Bedienungsanleitung

Soehnle

Soehnle 9330 Bedienungsanleitung

Soehnle

Soehnle 9055 Bedienungsanleitung

Soehnle

Soehnle COMPACT 61501 Bedienungsanleitung

Soehnle

Soehnle 2761 Bedienungsanleitung

Soehnle

Soehnle Shape F3 Bedienungsanleitung

Soehnle

Soehnle 7800 Bedienungsanleitung

Soehnle

Soehnle 6730 Bedienungsanleitung

Soehnle

Soehnle Slimdesign Riva Bedienungsanleitung

Soehnle

Soehnle verona Bedienungsanleitung

Soehnle

Soehnle 8122 g/oz Bedienungsanleitung

Soehnle

Soehnle Atlantic Bedienungsanleitung

Soehnle

Soehnle 67014 VERA CHROME Bedienungsanleitung

Beliebte Skala Handbücher anderer Marken

AWS

AWS ZEO-50 Bedienungsanleitung

Gima

Gima Glass Body Fat Analyzer Stücklistenhandbuch

Seca

Seca 374 Bedienungsanleitung

TEC

TEC TEC SL59 SERIES Bedienungsanleitung

Axis

Axis B/E Series Bedienungsanleitung

Alecto

Alecto ACW-40 Bedienungsanleitung

Rice Lake

Rice Lake MSI-4260 IS Bedienungsanleitung

IKA

IKA RCT basic safety control Bedienungsanleitung

ADE

ADE M20011 Bedienungsanleitung

Duronic

Duronic KS3000 Bedienungsanleitung

Digi

Digi SM-720 Bedienungsanleitung

Cardinal

Cardinal CS Series Bedienungsanleitung

Korona

Korona Kastella Bedienungsanleitung

A&D

A&D FC-50Ki Bedienungsanleitung

BDA

BDA CAMARGUE Bedienungsanleitung

Tanita

Tanita HD-357 Bedienungsanleitung

Leifheit

Leifheit 03173 Bedienungsanleitung

Lumme

Lumme LU-1340 Bedienungsanleitung