Solaxx SafeDip Bedienungsanleitung

Digital Chemistry Reader

Meter for Swimming Pools and Spas:

· Free Chlorine

· pH

· Salinity

· TDS

· ORP

· Temperature

WARNING!

This package contains pH calibration chemicals that may be

harmful if misused. Please read instructions carefully. Not to be

used by children except under adult supervision.

INTRODUCTION

SA FE- DI P ™ is a sw imm in g p ool w ate r t es ter o f

Cl/pH/Salt/TDS/ORP (Free Chlorine/pH/Salinity/TDS/ ORP). The

SAFE-DIP™ is an easy to use, accurate, and economical

measurement device that offers free chlorine level indication and

direct reading of pH, salinity, TDS and ORP with one device. It is a

device that covers almost all of the most important pool water

chemistry in order to maintain the water at its optimal condition for

bathers' safety and comfort as well.

Introduction & Safety Information

Specifications / Features

SAFE-DIP™ Meter Includes:

pH 7.0 Buffer Packet (for calibration)

PARTS & ACCESSORIES

pH Replacement Electrode

pH 7.0 Buffer Packet

 Operating range: 5~50°C, 0~12pH, 0 ~ 999mV (ORP),

1~80mS (Conductivity)

 Replaceable pH sensor. Resolution: 0.1 pH

 1 point pH calibration using 7.00pH standard buffer

 Automatic temperature compensation for pH and conductivity

 Temperature sensor. Resolution: 1°C; Accuracy: ±5% (~±1°C),

Selectable °C/°F system

 ORP sensor. Resolution: 1mV; Accuracy: ±20mV

(500~800mV)

 TDS and SALT. Resolution: 100ppm; Accuracy: ±20%

(200~5000ppm)

Important:

Please refer to www.safedip.com for a more detailed operator

instruction. The detailed instruction includes digital images in full

color as well as an online calculator which tells you exactly what to

add to your water based on the data retrieved from the Safedip

digital reader.

Go to www.safedip.com for more detailed instructions.

Front Panel Description

1. Battery compartment cap

2. LCD Display

3. ON/OFF button

4. START button – start a new measurement

5. CAL button – calibration of pH probe

o o

6. C/ F button – toggle between Celsius and

Fahrenheit

7. Sample Cup and

Electrode Compartment (inside)

8. Probe Electrode

9. Sleeve holding area (when meter is in use)

10. Probe Sleeve

Salt

TDS

ORP:

Good Low High

ppm

88.

8800

888 8 8

SAFE-DIP™ Display

1. Main display

2. Cl (free chlorine) indication Display Row

3. pH measurement Display Row

4. Salt (salinity) measurement Display Row

5. TDS measurement Display Row

6. ORP measurement Display Row

7. Hourglass: measurement in progress indicator

8. Battery indicator

9. Check mark: measurement done indicator

10. Disk icon: readings from memory

11. Tools icon: error warning

12. Temperature display

Meter Description

Go to www.safedip.com for more detailed instructions.

Getting Started

Setting up the meter

1. Place batteries (included) into the device. Refer to Battery

Replacement section of this manual.

2. Remove the sample cup in order to access the probes.

3. Remove the sleeve which protects the probes.

4. Calibrate the probe prior to first use and every month by referring to

the Calibration section of this manual.

Measurement

1. Fill the bottom 1/3 of the sample cup with the water sample. Make

sure to collect the water at least 1.5” from the surface. The other

option is to submerse the probes directly into the water sample.

2. Press the button.

The most recent measurement will always appear along with the

icon.

3. Remove the sleeve and attach it to holding area. Immerse the

Safedip probe in the water sample. Make sure the probes are

completely submersed.

4. Press the START button to begin a new measurement.

5. During the new measurement, the will blink before all stabilized

parameters are achieved.

6. When measurement is finished, a beep will be heard and newest

data will be displayed. The data will be saved in the memory until the

next measurement. Only the latest measurement is stored and all

prior measurements are discarded.

7. In order to view the latest readings at anytime, press .

8. If a new measurement is desired, repeat steps 3-6.

9. When finished using the meter, press the once to turn the

device off. If you forget to do so, the meter will turn off automatically

after 1 minute.

10. Always rinse the probes with fresh tap water after use. Replace

the sleeve in order to keep the probes wet. Failure to keep probes wet

will void the warranty.

___

Basic Operation

1) Power ON/OFF:

The SAFE-DIP™ uses two AAA batteries. If the batteries are weak,

the icon indicator will appear on the display. Press the ON/OFF

button to turn the SAFE-DIP™ on or off. The auto power off feature

will turn off the SAFE-DIP™ automatically after 1 minute of non-

use if no buttons are pressed.

____

o o

2) Toggle C/ F:

To change the displayed temperature units between °C or °F:

o o

With the SAFE-DIP™ ON, press C/ F button .

3) New Measurement:

When the meter is powered on, the LCD display will display the

readings from the very last measurement. The icon will also be

displayed. Press START button to start a new measurement. During

the new measurement, the icon will blink before all stabilized data

are achieved. (Please see detailed explanation in the Measurement

Procedure section.)

Go to www.safedip.com for more detailed instructions.

This instrument is guaranteed to be free from defects

in material and workmanship for a period of one year

from the date of original purchase. The probes are

guaranteed to be free from defects in material and

workmanship for a period of six months from the date

of original purchase. Damages brought on by abuse,

operator negligence, accident, misapplication,

mishandling, or acts of God will void this warranty.

This warranty is limited to the repair or replacement

of the product at the discretion of the manufacturer

and will not include transportation costs. This

warranty does not cover batteries.

This product cannot be returned without a return

authorization number from Solaxx. For warranty

support or a Return Authorization number, log onto

www.solaxx.com and click on support or email:

WARRANTY

Icon Description Range Actions

Temperature out of range

TDS or SALT out of range

ORP out of range

pH out of range

pH offset out of range

Low Battery

5 ~ 50 C

200 ~ 8000ppm

0 ~ 999mV

0 ~ 12pH

-20 ~ 20mV

Bring solution to the temperature within range

Use other solution

Use other solution or replace pH probe

Recalibrate or use new buffer to calibrate or replace pH probe

Replace batteries

N/A

Meter will not calibrate in pH

Meter will not turn on

Clogged or contaminated reference junction

Damaged or worn sensing membrane

Contaminated pH buffers

Batteries low or dead

Wrong battery polarity

Clean junction

Replace probe

Use fresh buffers

Replace batteries

Replace batteries with correct polarity

PROBLEM POSSIBLE CAUSE SOLUTION

Go to www.safedip.com for more detailed instructions.

Troubleshooting

Go to www.safedip.com for more detailed instructions.

Calibration Procedure

Calibration should be performed once a month. In order to calibrate,

a buffer solution is used. This solution is easily made using the buffer

packets provided with the original purchase. The buffer solution

insures the accuracy of the Safedip digital reader.

To create a buffer solution, follow these steps:

1.Empty entire contents of 1 buffer packet into a cup with 8 oz tap

water.

2.Stir the solution using a spoon for 20 seconds or until powder is

completely dissolved.

To calibrate, follow these steps:

1. Turn ON the Safedip.

2. Immerse the probes completely into the cup with buffer solution.

3. Gently swirl the probes to remove possible gas bubbles on the

probe tip.

4. With the probe in the solution, press and hold the CAL button for

more than 3 seconds and the 7.0 value will be displayed.

Release the button and the 7.0 value will blink. Press CAL button

again and the will then be displayed until calibration is

finished.

5. After the calibration is completed, the will be displayed along

with the calibration value of 7.0. While the 7.0 value is blinking,

press at anytime to abort.

Maintenance

Probe Care and Storage

1. Rinse the probe in distilled or tap water.

2. Store the Safedip with the probe sleeve over the

electrode. Always keep the sponge in the cap soaked with

tap water or pH 7 buffer solution.

3. Always rinse the probes in distilled or tap water between

measurements to avoid cross contamination. Double rinsing

is recommended when high accuracy is required.

4. Do not touch the probes. Touching the surface of the

probes may damage and reduce the life of the probes.

pH Probe Replacement

1. Unscrew and remove the pH probe collar. Twist collar

counter-clockwise.

2. Gently pull the probe away from the meter until it

disconnects from the probe socket.

3. To attach a new probe, align the slots and carefully twist

the probe clockwise into the meter socket.

4. Firmly tighten the probe collar to create a seal with the

rubber gasket between the probe and the meter.

Probe Cleaning Recommendations

Do not soak the probe in any cleaning solution. To do so may

cause a reference potential shift which will cause

degradation in performance. When cleaning the probe, use

tap water and be careful not to scratch or damage the glass

sensing surface.

Battery Replacement

1. Use a coin to twist off the battery compartment cap.

2. Replace the two AAA batteries. Observe polarity.

3. Replace the battery compartment cap and make sure it is

tightly secured to avoid water intrusion.

[email protected]

Digital Chemistry Reader

Andere Solaxx Prüfgeräte Handbücher

Solaxx

Solaxx SALTDIP Pro Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung