Soleus Air FCM-30 Bedienungsanleitung

12 IN. OSCILLATING

CONVERTIBLE

STAND/TABLE FAN

OWNER’S MANUAL

Model # FCM-30

PLEASE READ AND SAVE THESE INSTRUCTIONS

12 IN. OSCILLATING CONVERTIBLE STAND/TABLE FAN

Thank you for choosing a Soleus Air fan. This owner’s manual will provide you with

valuable information necessary for the proper care and maintenance of your new

product. Please take a few moments to thoroughly read the instructions and familiarize

yourself with all the operational aspects of your new fan.

For your own records, please attach a copy of your sales receipt to this manual. Also,

write the store name/location and date purchased below:

Store Name: ____________________________________________________

Location: ______________________________________________________

Date Purchased: _________________________________________________

WARNINGS

When using this electric unit, basic safety precautions should always be followed to

reduce the risk of fire, electric shock and personal injury, including the following:

1) Read all instructions before using this unit.

2) Use only for intended household use as described in this manual.

3) Plug the fan directly into a 120 V A/C electrical outlet.

4) Never insert your fingers, pencils, or other objects through the fan grill during

operation.

5) The fan should be used on a stable and level surface. Do not operate without the

grill being properly in place.

6) Do not expose the fan to excessive heat or humidity. This could cause damage

to the electrical components.

7) Do not immerse in any type of liquid. Do not use near water.

8) The fan should be kept out of the reach of children. Close supervision is

necessary when the fan is used by or near children.

9) Do not operate this or any appliance with a damaged cord, if the unit

malfunctions, or if it has been dropped or damaged in any manner. Connect to

properly polarized outlets only.

10) Do not cover the cord or place near heat sources. Keep the cord away from high

traffic areas, and do not submerge in water.

11) Unplug the fan before moving, cleaning or making repairs. NOTE: If for any

reason this unit requires service, return appliance to manufacturer or a similarly

qualified service agent to ensure safety.

12) To reduce the risk of fire or electric shock, do not use this fan with any solid-state

speed control device.

13) To disconnect, grip plug and pull from wall outlet. Never pull on the cord to

unplug.

14) For indoor use only.

WARNING

This fan has a grounded three

pronged plug intended to fit

into a three slot outlet. (A) An

adapter is available for

connecting three pronged

plugs into two slot outlets. (B)

When doing so, the green

grounding tab extending from

the adapter must be fastened

under the wall plate’s mounting

screw. The adapter should not

be used if a three-slot outlet is

available.

DO NOT DEFEAT THE

SAFETY PURPOSE OF THE

GROUNDED PLUG.

TECHNICAL SPECIFICATIONS

Voltage Rating 120V, 60Hz

Power Consumption 33W

Unit Size Stand: 13.5 in. (W) x 13.5 in. (D) x 38.5 in. (H)

Table: 13 in. (W) x 11 in. (D) x 16.5 in. (H)

Unit Weight 13.5 lbs

PRODUCT DIAGRAM

A) Front Grill

B) Fan Blade

C) Securing Screw

D) Mounting Nut

E) Back Grill

F) Carrying Handle

G) Motor Shaft

H) Speed Control Knob

I) Oscillation Knob

J) Motor Housing

K) Fan Head Neck

L) Pole

M) Adjustable Height Knob

N) Stand Fan Base

O) Black Weight

P) Washer

Q) Locking Lever

R) Adjustable Tilt Knob

S) Range of Motion Screw

T) Range of Motion Hole

U) Securing Knob

V) Carriage Bolt

)

Table Fan Base

ASSEMBLY INSTRUCTIONS

Tools required: Phillips screwdriver (not included).

Remove the fan and packaging materials from the box.

Stand Fan Base Assembly:

1) Unscrew the locking lever from the bottom of the pole.

2) Turn the pole upside down and slide the opening in the center of the fan base over

the pole. Place the black weight onto the base followed by the washer.

3) Insert the threaded end of the locking lever into the hole of the washer and through

the base into the bottom of the stand. Turn the locking lever clockwise to secure

and tighten the base to the pole.

4) Turn the base over and set it on the floor.

5) On the neck of the fan head, remove the securing knob, carriage bolt and

adjustable tilt knob. Loosen the range of motion screw.

6) Slide the fan head neck over the top of the pole so that the range of motion screw

aligns with the range of motion hole.

7) Insert the carriage bolt into the square slot on the fan head neck and push through

the hole.

8) Tighten the range of motion screw. Screw on the securing knob and the adjustable

tilt knob.

Table Fan Base Assembly:

1) On the neck of the fan head, remove the securing knob, carriage bolt and

adjustable tilt knob. Loosen the range of motion screw.

2) Slide the fan head neck over the top of the table base so that the range of motion

screw aligns with the range of motion hole.

3) Insert the carriage bolt into the square slot on the fan head neck and push through

the hole.

4) Tighten the range of motion screw. Screw on the securing knob and the adjustable

tilt knob.

Fan Head Assembly:

1) Remove the black sleeve and mounting nut from the motor shaft.

2) Position the back grill over the motor shaft, fitting the holes in the back grill over the

knobs that protrude from the motor. Make sure the rear grill fits securely against

the motor housing and the handle is at the top.

3) Secure the back grill by screwing on the mounting nut. Turn clockwise and tighten

firmly.

4) Loosen the securing screw on the fan blade. Slide the fan blade onto the mounting

shaft with the shaft sleeve facing the motor. Align securing screw with flat groove in

the motor shaft and tighten with Phillips screwdriver.

5) Remove the small securing bolt from the bottom of the front grill. Position front grill

so logo is horizontal and make sure the grill clips are open. Secure the top tab to

the back grill. Fasten the grills together with securing bolt. Hold the front grill

against the rear grill and snap the grill clips closed to complete the assembly.

Converting:

1) On the neck of the fan head, remove the securing knob, carriage bolt and

adjustable tilt knob. Loosen the range of motion screw.

2) Remove the fan head from the old base and slide over the new base so that the

range of motion screw aligns with the range of motion hole.

3) Insert the carriage bolt into the square slot on the fan head neck and push through

the hole.

4) Tighten the range of motion screw. Screw on the securing knob and the adjustable

tilt knob.

OPERATING INSTRUCTIONS

1) Set the fan on a stable, level surface.

2) Confirm that the Speed Control Knob is set to “O” (off). Plug the cord into a

standard 120V A/C outlet.

3) Adjust to the desired speed setting:

O: Off

I: Low Speed

II: Medium Speed

III: High Speed

4) The fan can operate in oscillation or stationary mode. Press the Oscillation Knob

down to activate the oscillating mode. To stop oscillation, pull knob up.

5) Unplug the fan when not in use.

Adjustment Instructions:

•To adjust the angle of the fan head, loosen the adjustable-tilt knob and move the

fan head to the desired angle. Firmly tighten the knob to secure into place.

•To adjust the height of the stand fan, turn the adjustable height knob counter-

clockwise to loosen the stand. Adjust the fan to the desired height, then firmly

tighten to secure into place.

CLEANING/MAINTENANCE

•Set the Speed Control Knob to off and unplug the unit.

•Clean the fan head, base, and pole using a damp cloth and a mild detergent, if

necessary. Make certain all detergent residue is removed.

•Never use abrasive cleaning agents or solvents. This may cause damage or

deterioration to the surface of the unit.

•Do not immerse the fan in any form of liquid. Do not allow water to drip on or into

the fan motor housing.

Fan Blade Cleaning:

1) Make certain the fan is unplugged. Unlock the metal clips on the front grill and

remove the front grill. Use a Phillips screwdriver to loosen the securing screw and

remove the fan blade.

2) The fan blade and grill may be cleaned with a damp cloth and mild detergent.

3) Reassemble the fan after the parts have dried completely. To do so, replace the

fan blade, tighten the securing screw, and secure the front grill. Do not plug the fan

into an electrical outlet until it is fully reassembled.

STORAGE

When not in use, store the fan in a cool, dry location. To prevent dust and dirt build-up,

use the old packaging to repack the unit.

Printed in China

WARRANTY

One Year Limited Warranty

Soleus International Inc. warrants the accompanying Soleus Air FCM-30 to be free from

defects in material and workmanship for the applications specified in its operation

instruction for a period of ONE (1) year from the date of original retail purchase in the

United States or Canada.

If the unit exhibits a defect in normal use, Soleus International, Inc. will, at its option,

either repair or replace it, free of charge within a reasonable time after the unit is

returned during the warranty period.

As a condition to any warranty service obligation, the consumer must present this

Warranty Certificate along with a copy of the original purchase invoice.

This Warranty Does Not Cover

1) Damage, accidental or otherwise, to the unit while in the possession of a consumer

not caused by a defect in material or workmanship.

2) Damage caused by consumer misuse, tampering, or failure to follow the care and

special handling provisions in the instructions.

3) Damage to the finish of the case, or other appearance parts caused by wear.

4) Damage caused by repairs or alterations of the unit by anyone other than those

authorized by Soleus International Inc.

5) Freight and Insurance cost for the warranty service.

ALL WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY

ARE LIMITED TO A ONE-YEAR DURATION OF THIS EXPRESS LIMITED

WARRANTY. SOLEUS INTERNATIONAL, INC. DISCLAIMS ANY LIABILITY FOR

CONSEQUENTIAL OR INCIDENTAL DAMAGES AND IN NO EVENT SHALL SOLEUS

INTERNATIONAL INC’S LIABILITY EXCEED THE RETAIL VALUE OF THE UNIT FOR

BREACH OF ANY WRITTEN OR IMPLIED WARRANTY WITH RESPECT TO THIS

UNIT.

As some states do not allow the limitation or exclusion of incidental or consequential

damages, or do not allow limitation on implied warranties, the above limitations and

exclusions may not apply to you. This warranty gives you specific legal rights, and you

may also have other rights that vary from state to state.

For Warranty, Technical Support, Customer Service, Missing or Defective Parts,

before returning to your retailer, please call (888) 876-5387.

Or Write To:

Soleus International Inc.

9451 Telstar Ave.

El Monte, CA 91731 USA

www.soleusair.com

Inhaltsverzeichnis

Andere Soleus Air Lüfter Handbücher

Soleus Air

Soleus Air FC1-38R-21 Bedienungsanleitung

Soleus Air

Soleus Air FTY-25 Bedienungsanleitung

Soleus Air

Soleus Air FC1-42R-03 Bedienungsanleitung

Soleus Air

Soleus Air FS2-40R-32 Bedienungsanleitung

Soleus Air

Soleus Air ST-2005 Bedienungsanleitung

Soleus Air

Soleus Air FT1-30-44 Bedienungsanleitung

Soleus Air

Soleus Air FE1-05 Bedienungsanleitung

Soleus Air

Soleus Air FTM-25 Bedienungsanleitung

Soleus Air

Soleus Air AIR602TF Bedienungsanleitung

Soleus Air

Soleus Air FC1-42R-03 Bedienungsanleitung

Soleus Air

Soleus Air FF-50-A Bedienungsanleitung

Soleus Air

Soleus Air FC3-35R-12 Bedienungsanleitung

Soleus Air

Soleus Air FC1-42R-21 Bedienungsanleitung

Soleus Air

Soleus Air FS3-40R-30 Bedienungsanleitung

Soleus Air

Soleus Air FS2-40R-32 Bedienungsanleitung

Soleus Air

Soleus Air FC1-15-30 Bedienungsanleitung

Soleus Air

Soleus Air ST-2008 Bedienungsanleitung

Soleus Air

Soleus Air FC1-15-30 Bedienungsanleitung

Soleus Air

Soleus Air FS1-40R-33 Bedienungsanleitung

Soleus Air

Soleus Air FT1-25-20/21 Bedienungsanleitung

Soleus Air

Soleus Air AIR931FW Bedienungsanleitung

Soleus Air

Soleus Air FT1-25-01 Bedienungsanleitung

Soleus Air

Soleus Air FS3-40R-30 Bedienungsanleitung

Soleus Air

Soleus Air FF1-50-53 Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung