SOLID AIR
®
CLIMATE SOLUTIONS •T +31 598 36 12 21 •www.solid-air.com •mail@solid-air.com
10 - 58
>> Product overview
>> Technical data
>> Models
>> Ordering key
>> Dimensions
>> Installations
>> Actuators
>> Accessories
>> Replacements
>> Maintenance and operation
PRODUCT OVERVIEW
ACTUATORS
R (R-S)
Manual operating mechanism, optionally with end switches (R-S). In case of re, the re
damper closes automatically. Damper closing can be initiated either by thermal fuse
melting, or by manual activation on the operating mechanism. Upon closure, damper
blade is locked in closed position and can only be opened manually. Thermal fuse
melting point is 72 °C.
EMS-S
Electromagnetic operating mechanism, comes with end switches as standard. In case
of re, the re damper closes automatically. Damper closing can be initiated either by
thermal fuse melting or remotely by triggering the electromagnet. Electromagnet is
constantly under power and activates closing of the damper blade in case the power
cuts out. Upon closure, damper blade is locked in closed position and can only be opened
manually. Thermal fuse melting point is 72 °C.
M230-S
Belimo 230 V electro motor operating mechanism, comes with integrated end switches.
In case of re, the re damper closes automatically. Damper closing can be initiated
either by thermoelectric release device or remotely by triggering the electro motor. Upon
closure, damper blade is locked in closed position and can be opened by sending a signal
to electro motor. Standard thermoelectric release point is 72 °C, optional 95 °C.
M24-S
Belimo 24V electro motor operating mechanism, comes with integrated end switches.
In case of re, the re damper closes automatically. Damper closing can be initiated
either by thermoelectric release device or remotely by triggering the electro motor. Upon
closure, damper blade is locked in closed position and can be opened by sending a signal
to electro motor. Standard thermoelectric release point is 72 °C, optional 95 °C.
M24-S-ST
Belimo 24V electro motor operating mechanism, comes with integrated end switches.
In case of re, the re damper closes automatically. Damper closing can be initiated
either by thermoelectric release device or remotely by triggering the electro motor. Upon
closure, damper blade is locked in closed position and can be opened by sending a signal
to electro motor. Standard thermoelectric release point is 72 °C, optional 95 °C. Actuator
is additionally equipped with connection plug for easy connection with power supply
and communication modules.
EX
ATEX rated re dampers are equipped with Schischek ExMax actuators, Exbox-TT thermal
switches and ExBox plenum boxes. Optional casing can be produced in AISI316L stainless
steel.
