Greenheck Vektor-MD Bedienungsanleitung

Vektor-MD Fastener Kits 1

Model Vektor-MD

Fastener Kits

Installation, Operation and Maintenance Manual

Please read and save these instructions for future reference. Read carefully before attempting to assemble, install,

operate or maintain the product described. Protect yourself and others by observing all safety information. Failure

to comply with these instructions will result in voiding of the product warranty and may result in personal injury

and/or property damage.

Table of Contents

Windband to Nozzle

Document 1016006 . . . . . . . . . . . . . . . . . . 2

Dilution Nozzle to Fan

Document 1016008 . . . . . . . . . . . . . . . . . . 3

Inline Silencer

Document 1016009 . . . . . . . . . . . . . . . . . . 4

Vektor-M Series ERS Fastener Kits2®

Document 1016006

Vektor-MD Fastener Kit

Windband to Nozzle

Laboratory Exhaust System

Assembly Instructions

READ THROUGH THESE INSTRUCTIONS PRIOR TO STARTING ASSEMBLY.

Windband

Nozzle

Phone: (715) 359-6171 • Fax: (715) 355-2399 • E-mail: vektor[email protected] • Website: www.greenheck.com

Assembly Instructions

1. See Greenheck Document #464652 (Installation, Operation

and Maintenance Manual: Vektor-MD, Vektor-MH and

Vektor-MS) for full installation instructions.

2. See image to the right to locate bolt holes. Attach

windband using the provided moly-coated 316 stainless

steel bolts through the bolt holes.

Tools Required

• Cordless drill (electric or pneumatic)

• 9/16 inch nut setter

• 9/16 inch wrench

FASTENER KIT 879425 – VEKTOR-MD SIZE 15-20

Part Description Part # Quantity

CS,HH,.375-16X1.5,SS,316,MOLY 415781 8

NUT,HEX,.375-16,SS,316 415799 8

WSHR,FLAT,.313X.05X.406X.875,SS,316 415800 16

WSHR,LOCK,SPLIT,.375,SS,316 415810 8

Assembly Instructions 1016006 1

FASTENER KIT 879426 – VEKTOR-MD SIZE 22-54

Part Description Part # Quantity

CS,HH,.375-16X1.5,SS,316,MOLY 415781 12

NUT,HEX,.375-16,SS,316 415799 12

WSHR,FLAT,.313X.05X.406X.875,SS,316 415800 24

WSHR,LOCK,SPLIT,.375,SS,316 415810 12

Assembly Instructions 1016006 1

Document Instructions

Use Document #1016006 with fastener kits 879425 and 879426. These kits are to be used with the Vektor-MD

model. The fasteners contained within the kit are to be used to attach the windband to the Vektor-MD nozzle. Use

the images located within this document to locate the position of the fasteners on the unit.

Note:

Vektor-MD – Sizes 36 and smaller, nozzle is attached to the fan housing.

Vektor-MD – Sizes 40 and greater, windband and nozzle ships as individual pieces.

Bolt and Washer

Detail

3/8 inch Stainless

Steel Fasteners

Vektor-M Series ERS Fastener Kits 3

Document 1016008

Vektor-MD Fastener Kit

Dilution Nozzle to Fan

Laboratory Exhaust System

Assembly Instructions

READ THROUGH THESE INSTRUCTIONS PRIOR TO STARTING ASSEMBLY.

Phone: (715) 359-6171 • Fax: (715) 355-2399 • E-mail: vektor[email protected] • Website: www.greenheck.com

Assembly Instructions

1. See Greenheck Document #464652 (Installation,

Operation and Maintenance Manual: Vektor-MD, Vektor-

MH and Vektor-MS) for full installation instructions.

2. See image to the right to locate bolt holes and

corresponding fasteners. Secure nozzle using

moly-coated stainless steel hardware (provided).

Tools Required

• Cordless drill (electric or pneumatic)

• 9/16 inch nut setter

• 9/16 inch wrench

• 1/2 inch nut setter

FASTENER KIT 879429 – VEKTOR-MD SIZE 36-54

Part Description Part # Quantity

CS,HH,.375-16X1.5,SS,316,MOLY 415781 16

NUT,HEX,.375-16,SS,316 415799 16

WSHR,LOCK,SPLIT,.375,SS,316 415810 16

WSHR,FLAT,.0625X.375X1.25,NEOP 370046 32

WSHR,FLAT,.375X.079X.406X1.5,SS,18-8 416516 32

CS,HH,.313-18X1,SS,316,MOLY,W/EPDM WSHR 416511 12

Assembly Instructions 1016008 1

Document Instructions

Use Document #1016008 with fastener kit 879429. This kit is to be used with the Vektor-MD model. The fasteners

contained within the kit are to be used to attach the Vektor-MD dilution style nozzle to the fan body. Use the

images located within this document to locate the position of the fasteners on the unit.

Blower Housing

Windband

Nozzle

Bypass Air Plenum

Roof Curb or

Structural Support

3/8 inch Stainless

Steel Fasteners

Bolt and Washer

Detail

12 X 5/16 inch SS Fasteners

with EPDM Washer

370046

and

416516

Vektor-M Series ERS Fastener Kits4®

Document 1016009

Vektor-M Series Fastener Kit

Inline Silencer

Laboratory Exhaust System

Assembly Instructions

READ THROUGH THESE INSTRUCTIONS PRIOR TO STARTING ASSEMBLY.

Phone: (715) 359-6171 • Fax: (715) 355-2399 • E-mail: vektor[email protected] • Website: www.greenheck.com

Assembly Instructions

1. See Greenheck Document #464652 (Installation, Operation and

Maintenance Manual: Vektor-MD, Vektor-MH and Vektor-MS) for full

installation instructions.

2. The fastener kit includes fasteners for one ﬂange. If the fan includes

stack extensions, multiple fastener kits will be supplied for each ﬂange.

3. See image below to locate bolt holes. Install moly-coated 316 stainless

steel screws (provided).

Tools Required

• Cordless drill (electric or pneumatic)

• 1/2 inch nut setter

8-16X per Flange

FASTENER KIT 879430 – VEKTOR-M SIZE 15-27

Part Description Part # Quantity

CS,HH,.313-18X1,SS,316,MOLY,W/EPDM WSHR 416511 8

Assembly Instructions 1016009 1

FASTENER KIT 879431 – VEKTOR-M SIZE 30-54

Part Description Part # Quantity

CS,HH,.313-18X1,SS,316,MOLY,W/EPDM WSHR 416511 16

Assembly Instructions 1016009 1

Document Instructions

Use Document #1016009 with fastener kits 879430 and 879431. These kits are to be used with the Vektor-MD

model. The fasteners contained within the kit are to be used to attach the silencer to the Vektor-MD dilution style

nozzle, a silencer to the blower housing, or a silencer to a stack extension. Systems supplied with inline discharge

silencers always have the nozzle section ship separate. The silencer is installed between the fan housing and

nozzle. Use the images located within this document to locate the position of the fasteners on the unit.

Blower Housing

Windband

Nozzle

Bypass Air Plenum

Roof Curb or

Structural Support

Andere Greenheck Feuer- und Rauchklappe Handbücher

Greenheck

Greenheck FSD Series Handbuch

Greenheck

Greenheck MBD-15 Bedienungsanleitung

Greenheck

Greenheck CFSD Series Bedienungsanleitung

Greenheck

Greenheck FD 150 Series Bedienungsanleitung

Greenheck

Greenheck HBS Series Handbuch

Greenheck

Greenheck FSDR Series Montage- und Bedienungsanleitung

Greenheck

Greenheck EHH-401 Bedienungsanleitung

Greenheck

Greenheck CRD-300WT Bedienungsanleitung

Greenheck

Greenheck FD150X Handbuch

Greenheck

Greenheck DFD Series Bedienungsanleitung

Greenheck

Greenheck HSD-401 Handbuch

Greenheck

Greenheck FD Series Betriebsanleitung

Greenheck

Greenheck FD Series Handbuch

Greenheck

Greenheck CFSD Series Bedienungsanleitung

Greenheck

Greenheck ABD-Z2 Bedienungsanleitung

Greenheck

Greenheck FD150X Montage- und Bedienungsanleitung

Greenheck

Greenheck HPR Series Bedienungsanleitung

Greenheck

Greenheck MBD-15 Bedienungsanleitung

Greenheck

Greenheck VCD Series Bedienungsanleitung

Greenheck

Greenheck FSDR Series Bedienungsanleitung

Greenheck

Greenheck RBDR Series Bedienungsanleitung

Greenheck

Greenheck HBT Series Bedienungsanleitung

Greenheck

Greenheck ES Series Bedienungsanleitung

Greenheck

Greenheck ESK-402 Montage- und Bedienungsanleitung

Beliebte Feuer- und Rauchklappe Handbücher anderer Marken

HVC

HVC NCA 700 Series Bedienungsanleitung

Wildeboer

Wildeboer FR90 Bedienungsanleitung

FläktGroup

FläktGroup ETCE Programmierhandbuch

Tamco

Tamco 1000 SM Series Bedienungsanleitung

Lindab

Lindab FBC2 Installations- und Betriebshandbuch

EKOVENT

EKOVENT EKO-SRB1 Montageanleitung

Advanced Air

Advanced Air 0160 Series Bedienungsanleitung

Swegon

Swegon Actionair CSS Series Bedienungsanleitung

TAKACHIHO

TAKACHIHO FYN-M 1 Series Bedienungsanleitung

Valmet

Valmet Flowrox Expulse Series Handbuch

ETS NORD

ETS NORD NORDfire FDMB Bedienungsanleitung

Mandik

Mandik MSD Bedienungsanleitung

AMS

AMS CR2 Bedienungsanleitung

Arzel

Arzel RegiDamper Bedienungsanleitung

mercor

mercor mcr S-THERM C Bedienungsanleitung

Mandik

Mandik FDMA-PM Bedienungsanleitung

BSB

BSB FD-C Montageanleitung

Slant/Fin

Slant/Fin JA Series Leitfaden