Solid Apollo DMX BOSS Bedienungsanleitung
DMX BOSS Wi-Fi Controller
Page 1
Product Description
Main Functions:
Antennas (2)
DMX Boss Controller
PRODUCT MANUAL
DMX BOSS Wi-Fi Controller
The DMX Boss is a new cutting edge DMX Controller that includes many new exciting features not seen before. The DMX Boss
includes a standard Glass touch control interface as well as Wi-Fi Capability for Smartphone and Tablet control for up to 8
dierent lighting zones.
• Control Up to 8 Dierent Lighting Zones
Independently or in Groups.
• 4 Channel RGB-W Compatible for Color Changing
Lights with Separate White Color.
• 10 Included Preset Programs with Color Chasing Option
• Adjustable Program Speed Buttons
• Adjustable Brightness Control Buttons
• ColorWheel for Precise Hue Control
• Color Creation with Independent Color Variations
• Easy to Use Interface
• Up to 32 Controllable DMX Channels
Product Features:
This manual reviews:
Toll Free: 866.592.3873
Email: [email protected]
www.SolidApollo.com
• White Gloss Flat Touch Screen Interface
• DMX XLR Input/Output
• RJ45 DMX Output
• Wi-Fi Router Built-in for Smartphone or Tablet Control
• Optional RF Remote Control
• Control non DMX LED Lights with optional DMX-RGB Interface
• Durable Metal Construction
• 2 Bi-Directional Wi-Fi antennas for maximum range
• Entire Installation Process
• Product Features and Primary Uses
• Detailed Functionality
• Troubleshooting Options
• Technical Parameters
The DMX Boss Controls LED Lights in 3 Dierent Ways:
• Smartphone or Tablet: Control LED lights using software on your Smartphone or Tablet.
• Integrated Glass Touch Control Interface: Simple and elegant touch screen design.
• Wireless Remote: Use the optional wireless remote for convenient lighting control.
DMX BOSS Wi-Fi Controller
Installation
The DMX Boss Wi-Fi Controller can control up to 8 lighting zones together or independently. After the installation is complete, you can
play programs and control a variety of colors.
Mounting the DMX Boss:
Attaching Antennas to the DMX Boss:
Pre-Drilled Mounting Screw Locations
The DMX Boss comes with solid mounting surfaces on both sides with pre-drilled holes for your choice of screws. There is no installation
needed on the back of the unit, so no access is required. Depending on the type of surface used to mount the DMX Boss, specic screws
and tools will be required. Please refer to your local hardware store for advice.
The DMX Boss comes with two antennas for maximum clear wireless range:
1Remove the red plastic caps. The DMX Boss and each antenna is labelled ANT 1 and ANT 2. Screw them down until they are
snug on their respective antenna ports.
Page 2
PRODUCT MANUAL
DMX BOSS Wi-Fi Controller Toll Free: 866.592.3873
Email: [email protected]
www.SolidApollo.com
Positive (+)
Negative (-)
XLR Out
ANT 1 ANT 2
RJ45
DMX
Controlled
Lighting
Fixture
DMX
Controlled
Lighting
Fixture
12V Power
Supply
DMX BOSS Wi-Fi Controller
Page 3
...continued on next page
Powering the DMX Boss:
XLR Plug Location on the DMX Boss:
Connecting the DMX Boss to Lighting Fixtures:
The DMX Boss comes with easy wire attachment ports on the right side of the controller and uses low 12V DC power.
The XLR Plug location is on the top of the DMX Boss and includes easy push button on the XLR out port.
The DMX Boss can be connected two ways, individually or simutaneously, using the XLR out plug and/or the RJ45 output.
1
2
Prepare the wires from the 12V DC power supply.To plug them in, rst depress the button over the matching wire, insert
the wire, then release the button. Check the wire is held snug.
If the wire pulls out, repeat step one and place the wire further in the correct hole. Repeat the previous step for the second
wire.
PRODUCT MANUAL
DMX BOSS Wi-Fi Controller Toll Free: 866.592.3873
Email: [email protected]
www.SolidApollo.com
INPUT
12VDC
PRI
+_Warning: If polarity is reversed damage to
controller will result and is not covered by
warranty.
DMX BOSS Wi-Fi Controller
Page 4
RJ45 Output Location on the DMX Boss:
The RJ45 output location is on the left side of the DMX Boss.
...continued on next page
PRODUCT MANUAL
DMX BOSS Wi-Fi Controller Toll Free: 866.592.3873
Email: [email protected]
www.SolidApollo.com
Pin1:Data+Pin7:GND
Pin2:Data- Pin8:GND
Learning
Switch
Reset
Switch
12345678
DMX Boss Connection Examples:
This section shows three dierent ways the DMX Boss can be connected to lighting zones.
Positive (+)
Negative (-)
XLR Out
XLR Out
XLR In
XLR In
Fixture 1
Channels
1,2,3,4
Fixture 2
Channels
5,6,7,8
Fixture 3
Channels
9,10,11,12
12V Power
Supply
XLR Out
XLR In
Using XLR Connection Ports: for DMX enabled xtures such as Wall Washers
1Begin by connecting the DMX lights to the DMX Boss by connecting them using the XLR ports on the top of the
DMX Boss. A total of 32 channels are available, for a total of 8 separate lighting zones (4 color channels in each
zone, for colors such as red, green, blue and white).The XLR connections on the lighting xtures can be connected
in a row. On each lighting zone, set the channel for that zone (refer to the user manual for the products used for
the correct channel numbers).The DMX Boss comes ready to use without pairing or programming as each of the 8
zone buttons are pre-programmed to recognize each zone (button 1 uses the rst 4 channels, 1-4, button 2 uses
the next set , 5-8, and so on).
DMX BOSS Wi-Fi Controller
Page 5
PRODUCT MANUAL
DMX BOSS Wi-Fi Controller Toll Free: 866.592.3873
Email: [email protected]
www.SolidApollo.com
Positive (+)
Negative (-)
RJ45 12V Power
Supply
-
-
-
-
DMX to RGBW
Controller
Channels
1,2,3,4
DMX to RGBW Controller
SKU: SA-CTRL-001-V2
(please refer to the
matching manual for
installation details)
DMX Boss Wi-Fi Controller
Using the RJ-45 Output
+
--
-
-
-
+
-
D1+
R
G
B
W
D1-
D2+
D2-
+
+
+
+
Ground (-)
Split Data Wire Apart for 3 Connections
Ground (-)
Data (+)
Data (-)
Data (+)
Data (-)
-
-
-
-
DMX to RGBW
Controller
Channels
9,10,11,12
+
-
+
-
D1+
R
G
B
W
D1-
D2+
D2-
+
+
+
+
-
-
-
-
-
-
-
-
DMX to RGBW
Controller
Channels
5,6,7,8
+
-
+
-
D1+
R
G
B
W
D1-
D2+
D2-
+
+
+
+
-
-
-
-
4 Channel
RGBW
Fixture
W- + G- R- B-
4 Channel
RGBW
Fixture
W- + G- R- B-
4 Channel
RGBW
Fixture
W- + G- R- B-
Using the RJ45 Output: for 4 Channel Lighting Fixtures such as LED Light Strips
2The data port plug can be used on the left side of the DMX Boss to connect directly to DMX controlled lights or can
be used with RGB-W lights using a receiver to convert DMX signals to 4 channel RGB-W signals.To connect directly
to DMX controlled lights, plug in the data cable into the DMX Boss and then plug into the DMX controlled lighting
xtures in a row. On each lighting zone, set the channel for that zone (refer to the user manual for the products
used for the correct channel numbers).The DMX Boss comes ready to use without pairing or programming as each
of the 8 zone buttons are pre-programmed to recognize each zone (button 1 uses the rst 4 channels, 1-4, button
2 uses the next set , 5-8, and so on). When connecting to RGB-W 4 channel lights, a receiver is required to convert
DMX signals to 4 channel RGB-W signals (sold separately), and one receiver is required for each zone. To connect
the receiver, please refer to the manual listed on the webpage for the 4 Channel DMX-RGB-W LED Controller.
...continued on next page
DMX BOSS Wi-Fi Controller
Page 6
PRODUCT MANUAL
DMX BOSS Wi-Fi Controller Toll Free: 866.592.3873
Email: [email protected]
www.SolidApollo.com
Positive (+)
Negative (-)
XLR Out
XLR In
DMX
Controlled
Lighting
Fixture
12V Power
Supply
Wireless DMX Transmitter/Receiver
SKU: SKU406
(please refer to the matching manual
for installation details)
Wireless DMX
Transmitter/
Receiver
XLR Out
XLR In
Wireless DMX
Transmitter/
Receiver
Up to 2100ft
Distance
Using the XLR Output with wireless connection: for DMX enabled lighting xtures such
as Wall Washers up to 2100 feet away
3Begin by connecting the DMX Boss to the Wireless DMX Transmitter/Receiver by using the XLR port on the top of
the DMX Boss. At the DMX enabled lighting xture, use the XLR ports to connect another Wireless DMXTransmit-
ter/Receiver, and then connect the lighting xtures similar to example 1 on page 4. Refer to the user manual for
the Wireless DMX Transmitter/Receiver for correct installation and use. A total of 32 channels are available, for a
total of 8 separate lighting zones (4 color channels in each zone, for colors such as red, green, blue and white).The
XLR connections on the lighting xtures can be connected in a row. On each lighting zone, set the channel for that
zone (refer to the user manual for the products used for the correct channel numbers).The DMX Boss comes ready
to use without pairing or programming as each of the 8 zone buttons are pre-programmed to recognize each zone
(button 1 uses the rst 4 channels, 1-4, button 2 uses the next set , 5-8, and so on).
DMX BOSS Wi-Fi Controller
Page 7
...continued on next page
PRODUCT MANUAL
DMX BOSS Wi-Fi Controller Toll Free: 866.592.3873
Email: [email protected]
www.SolidApollo.com
Color Wheel: By sliding your nger around the color wheel color selection can be made. It is also used in the auto
program function discussed later on where you can dene color transitions into memory.
ON/OFF Button: Used to turn o or on all zones.
Color Selection: The three main buttons are Red, Green, and Blue, but many other colors can be selected individually
or as a group to fast access colors and/or ne-tune colors. The W button is used for 2 purposes, 1- To turn ON/OFF the
White Channel (If you are also using single color LED Lights together with the color Changing Lights, and 2-To dim up
and down the White color. In order to dim up/down the white color, you will need to place your nger on top of the W
letter and keep it there until the white channel dims up/down until the desired level is achieved.
1
2
3
Operating the Wi-Fi Program using Smartphone or Tablet:
This section covers what the controls are and their functions.
Play Pause button: Use this button to play or pause any program.
Save Color or Program: This button is used when programing and memorizing individual colors or transitions for
each zone, or for all zones.
4
5
DMX BOSS Wi-Fi Controller
Page 8
...continued on next page
PRODUCT MANUAL
DMX BOSS Wi-Fi Controller Toll Free: 866.592.3873
Email: [email protected]
www.SolidApollo.com
Software Interface Main Functions
1. Software Setup
2. Color Wheel
3. Connection Status
4. ON/OFF Button
5. Return to previous program
6. Red, Green, Blue, and White Control
7. Save Color
8. Brightness Control
9. Program Speed Up and Down
10. Zone Selection
11. Play/Pause Button
Brightness Control: If used it will dim up or down all channels, including the 4th White Channel. If you want to dim
separately the white color, please see previous step 3.
Zone Selection: With these buttons you can easily select which zone you want to work with independently or in
group. For example if you want to change the color of Zone 1, select the number one in the zone section area (10) and
then use the color wheel ( 2) to select your color of choice.
8
9
Program Speed up and down: With this button you can increase and decrease the speed at which the lights change
color in the fading and chasing color programs.
7
Return to Previous Program: This button is used to select the previous played program.
6
DMX BOSS Wi-Fi Controller
Page 9
PRODUCT MANUAL
DMX BOSS Wi-Fi Controller Toll Free: 866.592.3873
Email: [email protected]
www.SolidApollo.com
iOS Android
1For iPhone/iPad installation: Download EasyColor from
the App Store. For Android Smartphones or tablets,
please download the software from Google Play.
On your device go to Wi-Fi Settings (iPad/iPhone/
Android shown below) you will see that there is a new
Wi-Fi network available called EasyColor. Select it,
enter the password: 0123456789 , then connect to it.
2
3Once you are fully connected to the Easy Color Network,
startuptheEasyColor applicationyou havedownloaded.
4When the application starts up, it will ask if you want to
establish a network connection. Please select “YES.” You
willgetto the settingspagewhere youhave toselect“ADD.”
5Once you press “Add” you will be prompted if you want
to establish a LAN connection or Wi-Fi Connection.
Select“add Wi.”
6After, you will be prompted to introduce several parameters.
a. For the SSID use the name of the router (easycolor).
b. Choose whatever name you plan on using.
c. For IP use the following Values:10.10.100.254:8899
d. Once the parameters are set, select the connection
button to“ON”.
7Then press Done, and back. You’re all set!
Wi-Fi Setup for Smartphone and Tablet Control:
This section covers installing and using software with the DMX Boss. Compatible with Apple iOS and Andriod operating systems.
DMX BOSS Wi-Fi Controller
Page 10
...continued on next page
2. Color Wheel: By sliding your nger around the color wheel color selection can be made. It is also used in the auto program
function discussed later on where you can dene color transitions into memory.
3. Connection Status: Every time you press any of the 11 buttons in the LEDWizard Interface the RED Light will blink in order to
show connection with the Router and receivers.
4. ON/OFF Button: Used to turn o or on all zones.
5. Return to previous program: Once a program is executed by using button 11, you can easily return to any previous program.
6. Color Selection: The three main buttons are Red, Green, and Blue, but many other colors can be selected individually or as a
group to fast access colors and/or ne-tune colors. The W button is used for 2 purposes, 1- To turn ON/OFF the White Channel (If
you are also using single color LED Lights together with the color Changing Lights, and 2- To dim up and down the White color. In
order to dim up/down the white color, you will need to place your nger on top of the W letter and keep it there until the white
channel dims up/down until the desired level is achieved.
1. Software setup: By pressing this button you will be able to congure the Network properties of the connection through the
LEDWizard Router as discussed previously.
PRODUCT MANUAL
DMX BOSS Wi-Fi Controller Toll Free: 866.592.3873
Email: [email protected]
www.SolidApollo.com
Operating the Wi-Fi Program using Smartphone or Tablet:
This section covers what the controls are and their functions.
Inhaltsverzeichnis
Andere Solid Apollo Fernbedienung Handbücher
Beliebte Fernbedienung Handbücher anderer Marken
Panasonic
Panasonic EUR7622KB0 Bedienungsanleitung
Bang & Olufsen
Bang & Olufsen Beo4 Bedienungsanleitung
Sunwave Tech.
Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung
Multiplex
Multiplex PROFI TX 9 Bedienungsanleitung
One Remote
One Remote RMB4 Bedienungsanleitung
FUTABA
FUTABA 9ZAP - PART2 Bedienungsanleitung
