Solid GENESIS DAS Bedienungsanleitung
©2019 SOLiD, Inc. All Rights Reserved. Confidential & Proprietary. Page 1
GENESISTM DAS
Installation and Maintenance
Version 0.0 Feb. 2019
GENESISTM DAS Operation Manual - Version 0.0 – Jan. 2019
©2019 SOLiD, Inc. All Rights Reserved. Confidential & Proprietary. Page 2
Copyright
All rights are reserved ©2019 SOLiD. Confidential and proprietary. Information contained in this document
is company private to SOLiD and should not be modified, used, copied, reproduced or disclosed in whole
or in part without the written consent of SOLiD.
Trademark Information
No right, license, or interest to SOLiD trademarks is granted here. By using this document, you agree not
to assert any right, license, or interest with respect to such trademark. Other product names mentioned in
this manual are used for identification purposes only and may be trademarks or registered trademarks of
their respective companies.
Disclaimer of Liability
The contents of this document, including graphics and screenshots, are current as of the date of
publication. SOLiD reserves the right to change the contents without prior notice. In no event shall SOLiD
be liable for any damages resulting from loss of data, loss of use or loss of profits. SOLiD further
disclaims any and all liability for indirect, incidental, special, consequential or other similar damages. This
disclaimer of liability applies to all products, publications and services during and after the warranty
period.
Getting Support and Providing Feedback
To authorize technical support or to establish a return authorization for defective units, make sure you
have the SOLiD serial numbers available. Serial numbers are located on the back of the unit, as well as
on the box in which it was delivered. Contact SOLiD for additional support information:
For Central & Latin America Region: CALA.support@solid.co.kr
For Asian Pacific Region excluding Korea: APAC.s[email protected]r
For Europe, Middle East & Africa: EMEA.support@solid.co.kr
GENESISTM DAS Operation Manual - Version 0.0 – Jan. 2019
©2019 SOLiD, Inc. All Rights Reserved. Confidential & Proprietary. Page 3
Revision History
Revision
Issue Date
Section
Changes
GENESISTM DAS Operation Manual - Version 0.0 – Jan. 2019
©2019 SOLiD, Inc. All Rights Reserved. Confidential & Proprietary. Page 4
Contents
Safety & Certification Notice ..................................................................................7
System Overview.....................................................................................................9
2.1 Purpose ......................................................................................................................................... 9
2.2 System Overview ........................................................................................................................ 11
2.2.1 System Components and Network Topology ................................................................ 11
2.2.2 System Capacities ......................................................................................................... 12
System Specifications ..........................................................................................13
3.1 General Specifications ................................................................................................................ 13
3.2 Ports and Environment Specifications ........................................................................................ 13
3.3 Downlink Specifications .............................................................................................................. 14
3.4 Uplink Specifications ................................................................................................................... 15
System Configuration and Functions..................................................................16
4.1 Low power Radio Node (LRN) .................................................................................................... 16
4.1.1 LRN Specifications ........................................................................................................ 16
4.1.2 LRN Functions and Description ..................................................................................... 17
4.1.3 LRN Front and Rear Panel ............................................................................................ 20
4.1.3.1 Front Panel ................................................................................................................. 20
4.1.3.2 Rear Panel .................................................................................................................. 20
4.1.4 LRN Installation.............................................................................................................. 21
System Operation..................................................................................................28
5.1 LRN Parameters ......................................................................................................................... 28
FCC/IC User Warning ............................................................................................30
GENESISTM DAS Operation Manual - Version 0.0 – Jan. 2019
©2019 SOLiD, Inc. All Rights Reserved. Confidential & Proprietary. Page 5
List of Illustrations
Figure 2.1 GENESISTM Network Topology ................................................................................................. 11
Figure 4.1 LRN Front, Side and Rear Views ............................................................................................... 16
Figure 4.2 LRN Appearance ....................................................................................................................... 17
Figure 4.3 LRN Front Panel View ............................................................................................................... 20
Figure 4.4 LRN Rear Panel View ................................................................................................................ 20
Figure 4.5 LRN Installation Clearance ........................................................................................................ 21
Figure 4.6 LRN Power Cabling ................................................................................................................... 24
Figure 4.7 LRN SFP Ports .......................................................................................................................... 25
GENESISTM DAS Operation Manual - Version 0.0 – Jan. 2019
©2019 SOLiD, Inc. All Rights Reserved. Confidential & Proprietary. Page 6
Glossary of Terms
Acronyms and abbreviation used in this manual are shown in the table below.
Abbreviation
Description
UPOI
Universal Point of Interface
UPIU
UPOI Point of Interface Unit
DAU
Distribution & Aggregation Unit
DRFU
DAU RF Unit
DDTU
DAU Digital Transceiver Unit
DPSU
DAU Power Supply Unit
DFAN
DAU FAN
DCU
DeCode Unit
HOU
Hub Optic Unit
HODTU
HOU Digital Transceiver Unit
HOPSU
HOU Power Supply Unit
HOFAN
HOU FAN
EPSU
Expansion Power Supply Unit
LRN
Low power Radio Node
RBU
RN Base Unit
LPMU
LRN Power Amplifier & Multiplexer Unit
GENESISTM DAS Operation Manual - Version 0.0 – Jan. 2019
©2019 SOLiD, Inc. All Rights Reserved. Confidential & Proprietary. Page 7
Safety & Certification Notice
“Only qualified personnel are allowed to handle this unit. Read carefully and understand all the
warning labels attached in this user manual”
Any personnel involved in installation, operation or service of the SOLiD repeaters must
understand and comply the following:
Understand all general and regional installation and safety regulations relating to work on high
voltage installations, as well as regulations covering correct use of tools and personal protective
equipment.
The power supply unit in repeaters contains dangerous voltage level, which can cause electric
shock. Switch the mains off prior to any work in such a repeater. Any local regulations are to be
followed when servicing repeaters.
The repeater cover should be (door) securely fastened in open position, e.g. by tying it up, at
outdoor work in order to prevent door from slamming due to wind causing bodily harm or
damage.
Use this unit only for the purpose specified by the manufacturer. Do not carry out any
modifications or fit any spare parts which are not sold or recommended by the manufacturer.
This could cause fires, electric shock or other injuries.
Any repeater, including this repeater, will generate radio signals and thereby give rise to
electromagnetic fields that may be hazardous to the health of any person who is extensively
exposed to the signals at the immediate proximity of the repeater and the repeater antennas.
Due to power dissipation, repeater may reach a very high temperature. Do not operate this unit
on or close to flammable materials.
Do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia, or
abrasives.
For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be
easily accessible.
This power of this system shall be supplied through wiring installed in a normal building. If
powered directly from the mains distribution system, it shall be used additional protection, such
as overvoltage protection device.
Round terminals located on the rear of a 1.0mm2 (16AWG) or more wires using permanently
connected to earth.
WARNING
This is a class A product. In domestic environment, this product may cause radio interference in which
cause the user may be required to take adequate measures.
Home/ personal use are prohibited.
GENESISTM DAS Operation Manual - Version 0.0 – Jan. 2019
©2019 SOLiD, Inc. All Rights Reserved. Confidential & Proprietary. Page 8
Rotating fan Blade
Can cause serious injury or pain. Keep hands clear. Turn off and lock-out unit before servicing.
CAUTION
Do Not Open Except at Approved Field Force Protective Work Station.
GENESISTM DAS Operation Manual - Version 0.0 – Jan. 2019
©2019 SOLiD, Inc. All Rights Reserved. Confidential & Proprietary. Page 9
System Overview
GENESISTM is a coverage system for indoor and outdoor services delivering voice and data in high
quality and for seamlessly.
As a distributed antenna system, it provides analog and digital phone systems that are served in multiple
bands. The system covers general public institutions and private facilities.
Small building
Shopping Malls
Hotels
Campus areas
Airports
Subways
Multi-use stadiums, convention centers, etc.
The system helps to improve indoor/outdoor radio environments in poor condition and makes better RSSI
and Ec/Io. By providing communication services at every corner of buildings, the system enables users to
make a call at any site.
The GENESISTM system supports communication standards and public interface protocols in worldwide
use.
Frequencies: 700MHz, 800MHz, 1900MHz, 2100MHz, 2300MHz, 2500MHz, etc.
Technologies: GSM, EDGE, CDMA2000, 1XEVDO, WCDMA, LTE, APCO 25, etc.
GENESISTM is in modular structure per frequency band. To provide desired frequency in target venue, all
you need to do is to insert a corresponding frequency module into each unit. As it delivers multiple signals
with one optical cable, the system, in one-body type, does not require additional facilities whenever new
frequency is added.
The head-end unit must always be connected to the Base Station using a direct cabled connection. This
system has not been approved for use with a wireless connection via server antenna to the base station.
GENESISTM DAS Operation Manual - Version 0.0 – Jan. 2019
©2019 SOLiD, Inc. All Rights Reserved. Confidential & Proprietary. Page 10
The system is featured with the followings:
Universal One Digital transport DAS platform
Cover small to large venues with Low power remotes
Common Head-End for various remote types
Low power remotes to transport signals over an optical fiber
SOLiD GENESISTM is a robust, flexible, expandable, and customizable cellular coverage solution for
multiple operators and technologies as universal platform. It also supports enterprise, outdoor and indoor
coverage applications.
Excellent Architecture & Performance
Advanced platform of mix and match topology - any RN connection
Near-far mitigation functions - digital filtering and fast ALC function
Low power consumption - high linearization technology
Flexible & Scalable Deployment
Support any band combination - simply plug-in as your network grows
Modular plug-in and play structure - easy management and expandable
High Capacity & Evolution
Sector switching (cell split/combine) - software controlled based on user pre-defined profiles
Smooth LTE migration ready for all bands - technology refarming
Easy Management
Embedded DMS, server DMS and cloud EMS
High-quality user experience(visibility, intuitive troubleshooting, auto commissioning, and
reports)
Single EMS for managing LRN
Automatic node discovery
Easy-set
Flexible power splitting
Inhaltsverzeichnis
Andere Solid Netzwerk-Hardware Handbücher
Beliebte Netzwerk-Hardware Handbücher anderer Marken
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung
Yudor
Yudor YDS-16 Bedienungsanleitung
D-Link
D-Link ShareCenter DNS-320L Bedienungsanleitung
Samsung
Samsung ES1642dc Gebrauchsanweisung
Honeywell Home
Honeywell Home LTEM-PV Montageanleitung
