Sollae Systems P5H-155 Bedienungsanleitung

P5H-155 User Manual > Introduction

2021-12-10 Sollae Systems page 1 of 13

Overview

The P5H-155 is a programmable device that provides Ethernet function. Because this product equips

2 digital output ports, you can remotely control two relays via network.

Programming on this product requires the use of PHPoC (PHP on Chip). PHPoC is quite similar in

syntax to PHP, the general-purpose scripting language. Therefore, anyone with experience in

programming can easily learn and use it.

※ Although PHPoC and PHP are quite similar in syntax, they are clearly different programming

languages. Refer to the PHPoC Language Reference and PHPoC vs PHP for detailed information.

P5H-155 User Manual > Features

2021-12-10 Sollae Systems page 2 of 13

Features

self-developed PHPoC interpreter

simple development environment via USB

10/100Mbps Ethernet

2 digital output ports

2 user-defined LEDs

self-developed TCP/IP stacks

Web Server

WebSocket, TLS

various libraries (Email, DNS, MySQL and Etc.)

dedicated development tool (PHPoC Debugger)

P5H-155 User Manual > H/W Specification

2021-12-10 Sollae Systems page 3 of 13

H/W Specification

Power Input Power DC Jack, 5V (±0.5V)

Current Consumption typical - approximately 328mA

Dimension 94mm x 57mm x 24mm

Weight approximately 68g

Interface

Digital Output 6-pole terminal block, 2 digital outputs,

NO or NC type

Network 10/100Mbps Ethernet

USB USB Device Port - for PC connection

LED 8 LEDs(System: 6, User-defined: 2)

Temperature (storage/operating) -40℃ ~ 85℃

Environment RoHS Compliant

P5H-155 User Manual > Layout

2021-12-10 Sollae Systems page 4 of 13

Layout

1. Supplying Power

DC 5V Input

This port is the input port for supplying power. Specification is as follows:

P5H-155 User Manual > Layout

2021-12-10 Sollae Systems page 5 of 13

2. Ethernet

Ethernet port supports 10/100Mbps Ethernet. This port is an RJ45 connector and it is mapped to

NET0 for programming.

3. Digital Output

2 digital output ports are an 6-pole(5mm pitch) terminal block. Each port is mapped a specific pin of

UIO0 for programming.

Port Description Terminals UIO pin

DO0 digital output port #0 COM, NO, NC UIO0.0

DO1 digital output port #1 COM, NO, NC UIO0.1

P5H-155 User Manual > Layout

2021-12-10 Sollae Systems page 6 of 13

Normal Open

It means that the output port default is OFF. This method can be used by connecting user

equipment to COM terminal and NO terminal of each output port. The maximum allowable current

is 5A at DC 30V.

Normal Close

It means that the output port default status is ON. This method can be used by connecting user

equipment to COM terminal and NC terminal of each output port. The maximum allowable current is

1A at DC 30V.

4. LED

This product has 8 LEDs. The user-defined LEDs are turned on when you output LOW to the UIO pin

connected.

Lable Color Description UIO pin

PWR Red System LED - power supplying status -

STS Yellow System LED - system status -

A Green User-defined LED UIO0.30

B Green User-defined LED UIO0.31

Do0 Green System LED - status of input port #0 UIO0.0

Do1 Green System LED - status of input port #1 UIO0.1

RJ45_G Green System LED - network link status -

RJ45_Y Yellow System LED - system status -

5. Function Button

The function button, which is inside the hole of the side panel, is used to operate this product as a

button setup mode.

6. USB Device Port for connection with PC

The USB device port is to connect with PC. You can access to P5H-155 via development tool by

connecting USB cable to this port.

P5H-155 User Manual > How to Use > Software(IDE)

2021-12-10 Sollae Systems page 7 of 13

Software (IDE)

PHPoC Debugger

PHPoC Debugger is a software used for developing and setting PHPoC products. You need to install

this program on your PC for using PHPoC.

PHPoC Debugger Download Page

PHPoC Debugger Manual

Functions and Features of PHPoC Debugger

Upload files from local PC to PHPoC

Download files in PHPoC to local PC

Edit files stored in PHPoC

Debug PHPoC scripts

Monitor resources of PHPoC

Configure parameters of PHPoC

Upgrade Firmware of PHPoC

Support MS Windows O/S

P5H-155 User Manual > How to Use > Connecting

2021-12-10 Sollae Systems page 8 of 13

Connecting Product

USB Connection

Connect the USB device port of P5H-155 to your PC via a USB cable.1.

Run PHPoC Debugger2.

Select connected COM PORT and press connect ( ) button.3.

If USB is successfully connected, connect button will be inactivated and disconnect button (4.

) will be activated

Remote Connection

P5H-155 provides the remote connection. Please refer to the PHPoC Debugger manual page for

details.

P5H-155 User Manual > How to Use > Reset

2021-12-10 Sollae Systems page 9 of 13

Reset

Settings Reset

Settings Reset makes all settings of your PHPoC products to factory default.

Settings Reset Procedure

Step Action Product State STS LED

1Press function button shortly (less than 1

second) Button setup mode On

2Keep pressing the function button over 5

seconds Preparing initialization Blink very

rapidly

3 Check if the STS LED is turned OFF Initialization ready Off

Release the function button right after the

STS is OFF.(※ If you don't release the

button within 2 seconds, the state go back

to the step 3)

Progressing

initialization On

5 Rebooting automatically Initial state Off

Factory Reset

Factory Reset makes all settings of your PHPoC products to factory default including a password.

Futhermore, all files stored in flash memory are deleted as well as certificate. Because of this, you

have to backup your files before doing Factory Reset. To progresss the Factory Reset, the PHPoC

Debugger is required.

Factory Reset Procedure

P5H-155 User Manual > How to Use > Web Interface

2021-12-10 Sollae Systems page 10 of 13

Web Interface

PHPoC itself has a webserver to provide a web interface. When receiving a HTTP request, it executes

the php script in the requested file (if there) and respond to the client. Webserver is independent of

PHPoC main script. TCP 80 is used for web server and you can use the interface via Internet Explorer,

Chrome or any other web browsers.

How to use web interface

To use the web interface, "index.php" file should be in the file system of your PHPoC. Connect to

this page by entering device IP address after connecting it to network.

If the name of file is not "index.php", just specify the name of file after the IP address with slash

mark.

Practical Use of Web Interface

Since the web server executes the php script in the requested file, user can put php code in the in

the requested file to interact with peripherals. It is worth noting that there is other way to interact

with the peripherals in real-time from web interface. This can be done by using websocket.

Inhaltsverzeichnis

Andere Sollae Systems Netzwerk-Hardware Handbücher

Sollae Systems

Sollae Systems EZL-80c Bedienungsanleitung

Sollae Systems

Sollae Systems SCG-5608 Bedienungsanleitung

Sollae Systems

Sollae Systems CSE-T16 Bedienungsanleitung

Sollae Systems

Sollae Systems P5H-153 Bedienungsanleitung

Sollae Systems

Sollae Systems EZL-50L Bedienungsanleitung

Sollae Systems

Sollae Systems P5H-151 Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Lanner

Lanner NCA-1525 Bedienungsanleitung