R
Custom setting instructions
Tips
·When the unit is in custom setting menu, press switch can return to the display menu。[POWER]
The receiver offers 13 second level custom settings options accessible from the item Main Display
<SET?> [ENTER] [MENU] Press to access the custom settings, then repeatedly to view each of the
following options.
1
(backlight setting, ON, OFF or DELAY. Delay: 1, 2, 3, 4 or 5 minutes. The default
is 1 minute. )
< >LED
3 ( M=meter or FT=feet, meter is the default )< >Unit of altitude
4
.The UTC time is received from the GPS signal and cannot be
adjusted. The local time can be adjusted to meet the user’s local time by changing
the time zone. (U=UTC or L=Local time. UTC is the default).
< >UTC Time or Local time
5 ( YYYY.MM.DD,DD.MM.YYYY or MM.DD.YYYY, < >Date format YYYY.MM.DD is the default.)
6 (KM=kilometer, MIL=mile, or N=nautical mile. KM is the default )< >Unit of speed
7
2< >LOCK (Automatically use the last known position or not use, LOCK-use or UNLOCK-do
not use, LOCK is the default )
Pro2-EOS
5
< >Logging interval set
[ENTER] button to set the interval time. The interval time can be set as 1, 5, 10, 15,
30 sec o n d s , 1, 2, 5, 10, 20 o r 3 0 m i n u t e s . 1 0 s e c . i s t h e d e f a u l t .
To disable the function press the [MENU] button until DISABLE is shown on the LCD.
Press [ENTER] to confirm your selection.
. The number displayed shows the available memory. Press the
