Solo 526L Kurzanleitung

FLAIL MOWER

WITH HONDA GX 270 ENGINE

MODEL 526L

OPERATING AND SAFETY INSTRUCTIONS

REF. : G08000 16/12/2003

Contents of the FLAIL MOWER Manual

1. Use of the Manual

2. Notices on the machine

3. Technical data

4. Lifting and transportation

5. Main parts of the machine

6. Controls and adjustments

7. Assembly instructions for the handlebars and front support with wheels

8. Safety information

a) General instructions

b) Training

c) Preparation

d) Working use

e) After work

9. Transportation of the machine

10. Description of the safety systems and guards

11. Operations to be carried out before switching on

12. Starting and driving the flail mower

13. Cutting tips

14. Checks

A) tyre pressure

B) cable control adjustment

C) brakes adjustment

D)belt replacement and adjustment

E) checking and replacing the flails

F) sharpening the flails

G) checking and replacing the transmission oil

15. Maintenance and storage

16. Cleaning the machine

17. Seasonal long-term storage periods

18. Decommissioning and scrapping

19. Technical assistance

20. Warranty

21. CE marking

22. Troubleshooting

Enclosure 1. NOTES

Enclosure 2. Declaration of Conformity

OPERATING AND SAFETY INSTRUCTIONS

FLAIL MOWER MOD. 526L

FOREWORD

This machine may only be utilized for the purpose for which it was designed, i.e.

agricultural use, for the cutting of shoots, grass and brushwood.

Any other use other than that stated, not covered or deducible from this Manual

and the enclosed Engine Manual is "PROHIBITED".

Failure to comply with instructions in this Manual and in the Engine Manual re-

leases the manufacturer from all liability, in particular for any damage resulting

from improper or incorrect use, through negligence, superficial interpretation or

flagrant disregard for the safety requirements herein.

Get your dealer to explain how to use the machine in optimum safety conditions.

Always perform the checks as prescribed herein before each work session with

the machine.

Should any information given in the following pages be unclear or not straightfor-

ward please contact the manufacturer directly.

1. USE OF THE MANUAL

This Manual consists of numbered pages and enclosures featured in the list of

contents.

Before operating the machine the user must read the instructions in the Operator's

Manual carefully as well as those of the Engine Manual enclosed.

Use of the flail mower by more than one operator (individually), means that they

must have carefully read the Operator's Manual and the Engine Manual before

using it.

The aforementioned manuals form an integral part of the machine and must

therefore be kept intact and in good condition, in a known, easily accessible place

for the entire working life of the machine, even if the flail mower is passed on to

another owner. The purpose of these manuals is to provide the information nec-

essary for the safe and competent use of the product. In the instance of wear or

purely for a greater technical working knowledge, the manufacturer may be con-

tacted directly. The Notes Section at the end of the Flail mower Manual is for the

addition of any complementary notes.

NOTICES ON THE MACHINE

In this Manual all safety information appears in special boxes headed

"WARNING".

WARNING

This heading is used to draw the user's attention to hazardous areas or moving parts of

the machine. It is also used in instances where failure to comply with the instructions

given may result in injury to persons and animals or damage to property.

The symbols affixed to the machine serving to warn of danger during its use and

maintenance are as follows:

The user must read the instruction manual

provided

Danger of foreign objects being thrown

outwards. Keep a safe distance.

Warning. Always disconnect the cable from

the engine spark plug.

Danger of hand injury. Switch off the engine.

Danger of crushing. Keep a safe distance.

Danger of injury to both upper and lower

limbs.Do not put hands or feet inside the cutting

element while in motion.

Danger of getting caught up in rotating parts.

Do not put hands in the rotating parts.

Danger of foreign objects being thrown outwards.

Safety goggles must be worn.

Ear Do not allow children near the machine

when in operation.muffs must be worn.

Caution: hot parts. Danger of burns.

Fire hazard.

The symbols affixed to the machine serve to warn of danger during its use and

maintenance.

It is vitally important to understand the meaning of the danger notices and all

messages should be kept in legible condition. In the instance of wear these no-

tices should be replaced and use of the machine suspended while without such

notices.

The operator is advised to observe the warnings given on the affixed notices.

3. TECHNICAL DATA OF THE MODEL 526L

ENGINE : petrol, HONDA GX 270

ENGINE CAPACITY : 6.6 kW (9.0 HP)

ENGINE FILTER : Dry filter

WORKING WIDTH : 75 cm

CUTTING HEIGHT : adjustable 20 - 80 mm

CUTTING SYSTEM : 40-flail rotor

SPEED GEARS : 3 forward gears – 2 reverse gears

TRANSMISSION : mechanical

GEARS : in oil bath

SPEED : forward (1) 1.8 km/h (2) 2.15 km/h (3) 4.1km/h

reverse (1) 1.8 km/h (2) 2.15 km/h

WHEEL RELEASE : mechanical

MECHANISM

START : recoil

SERVICE BRAKE : on wheel axle

ROTOR BRAKE : on rotor drive

HANDLEBARS : Height and side-adjustable handlebars

TYRES : TRACTOR 16x6.50-8

SIZE L x W x H (mm) : 1780 x 850 x 1040 mm

WEIGHT (kg) : 150

ACOUSTIC PRESSURE, measured according to EN 12733 : 89 dBA

ACOUSTIC POWER, measured according to EN 12733 : LWA 98 dBA

HANDLEBAR VIBRATION ( EN 12 733) AW = 5.1 m/sec_

Environmental conditions

Unless otherwise stated at the time of ordering it is understood that the machine is

to work normally in the environmental conditions covered by the following points.

Environmental conditions other than those described may cause mechanical

breakage resulting in the creation of dangerous situations for persons.

ALTITUDE

The altitude of the place in which the machine is to be used must not exceed 1500

m above sea level.

TEMPERATURE

Minimum ambient temperature: -5°C

Maximum ambient temperature: +50°C

ATMOSPHERIC CONDITIONS

The electrical equipment will function correctly in atmospheric conditions with a

relative humidity up to 50% at a temperature of 40°C and at 90% with a tempera-

ture up to 20°C (without condensate).

ATMOSPHERE WITH RISK OF EXPLOSION AND/OR FIRE

The standard machine herein described is not designed to work in explosive at-

mospheres or in those with risk of fire.

4. LIFTING AND TRANSPORTATION

All material is carefully checked by the manufacturer before shipping. The flail

mower is delivered in a wooden crate or cardboard box with the front support with

wheels disassembled.

Upon receipt of the machine make sure that it has not been damaged during tran-

sit and that the packaging has not been tampered or any parts removed. Report

any damage or missing parts immediately to the driver and the manufacturer with

photographic documentation.

After assembling the front support with wheels and the safety bar as per the in-

structions given in paragraph 7 of this manual, the machine may be moved on its

own wheels.

The manufacturer is not liable for any damage caused by transportation of the

machine after its delivery.

WARNING

Extreme care must be taken during handling to prevent overturning. Avoid steep

gradients to prevent loss of control.

Make sure that there are no persons present within the danger area.

5. MAIN PARTS OF THE MACHINE

The machine consists of the following main parts

A- Forward clutch control lever

B- Accelerator control lever

C- Emergency brake control lever

D- Flail rotor clutch control lever

E- Right wheel release lever

E1 - Left wheel release lever

F- Engine

H- Front guard

I-Cutting height adjustment lever

L- Handlebar height adjustment lever

M- On/off switch (1/0)

N- Speed selector lever

O- Gear lever

Inhaltsverzeichnis

Beliebte Rasenmäher Handbücher anderer Marken

RHINO

RHINO 1958 Bedienungsanleitung

Wolf Garten

Wolf Garten Compact plus 40 B Bedienungsanleitung

Cub Cadet

Cub Cadet LTX 1045 Bedienungsanleitung

Craftsman

Craftsman 917.378461 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Bedienungsanleitung

Challenge

Challenge CH18V2 Betriebsanleitung

TALEN TOOLS

TALEN TOOLS AVR HGM30 Bedienungsanleitung

DEWEZE

DEWEZE ATM-725 Bedienungsanleitung

Weed Eater

Weed Eater 180083 Bedienungsanleitung

Husqvarna

Husqvarna Poulan Pro PP185A42 Bedienungsanleitung

Better Outdoor Products

Better Outdoor Products Quick Series Bedienungsanleitung

Cub Cadet

Cub Cadet 23HP Z-Force 60 Betriebsanleitung

MTD

MTD 795, 792, 791, 790 Bedienungsanleitung

Toro

Toro Groundsmaster 3505-D Bedienungsanleitung

Dennis

Dennis FT 610 Bedienungsanleitung

AIRFORCE

AIRFORCE F-15 Gen 3 Bedienungsanleitung

MTD

MTD 126-220-000 Bedienungsanleitung

Toro

Toro 74806 Bedienungsanleitung