5. HowtoUseyourSoloProtectIDPro
5.1 Charging&PoweringyourDevice
You should ensure that your SoloProtectIDPro is fully charged before use.
We recommend leaving the device on charge for a minimum of 3 hours per day
or at the end of each shi using the SoloProtect supplied charger. Aside from the
Incapacitaon Alarm, the Alert funcons on your SoloProtectIDPro can sll be used
while the device is on charge. Once removed from charge it will power down unl
you are ready to begin using it.
When your SoloProtect ID Pro is connected to the charger, the Baery Symbol
(situated top le in the user interface) on the display will reect this. As the baery
charges, the baery symbol shows more cells.
When you place your device onto charge, or remove it, the screen will “wake up” to
indicate the change. If you put the device on charge while it is powered o, it will
display a charging screen, which disappears once the device is removed from charge.
SoloProtectIDPro is charged via a USB-Type C connecon.
0% charge 20% charge 40% charge 60% charge 80% charge 100% charge
8
SoloProtect ID Pro Start Guide v1.02 © SoloProtect Ltd, 2019
Please ensure that once you have removed the
charging cable from your ID Pro device, you
replace the port cover as this will prevent water
and dust ingress.
To assemble your charger
head, place the plug over
the charger, lng to the
le as shown. Push the
plug down unl you hear
a ‘click’.
