SOLTEK 85MIR Bedienungsanleitung
4
85MIR / 85MIR-L
Contents
Chapter 1 Specification ............................................. 9
1-1 SL-85MIR / 85MIR-L Components Locations ................. 10
1-2 Mainboard Specifications ..................................................... 11
1-2.1 CPU Socket ................................................................................... 11
1-2.2 System Chipsets ........................................................................... 11
1-2.3 Memory ......................................................................................... 11
1-2.4 AMI BIOS ..................................................................................... 11
1-2.5 Accelerated Graphics Port (AGP) Interface........................... 11
1-2.6 VGA on board .............................................................................. 12
1-2.7 Advanced System Power Management:................................... 12
1-2.8 Multi-I/O Functions :.................................................................. 12
1-2.9 Expansion Slots ............................................................................ 13
1-2.10 LAN (Local Area Network) on board (85MIR-L only)....... 13
1-2.11 Hardware Monitor on board ................................................... 13
1-2.12 AC’97 Audio Codec on board................................................. 13
1-2.13 6-channel Audio-out Support (optional) ............................... 13
1-2.14 Form Factor................................................................................ 13
1-3 Mainboard Specification Table ........................................... 14
1-4 Chipset System Block Diagram........................................... 15
Chapter 2 Hardware Setup ..................................... 16
2-1 Pentium 4 CPU and Installation ......................................... 17
2-1.1 To Identify a Pentium 4 CPU..................................................... 17
2-1.2 Pentium 4 CPU Installation with Socket 478 ................ 18
2-2 Pentium 4 CPU Fan Installation ......................................... 19
2-3 Memory Installation ............................................................. 20
2-3.1 To Install DDR SDRAM Module for this Mainboard ........... 20
2-3.2 To Remove a DIMM .................................................................... 21
5
Contents
2-4 Install VGA / AGP4X with LED1 & Jp4 Safeguard........ 22
2-5 IDE Connector Installation ................................................. 23
2-6 Floppy Drive Connector ( FDC ) Installation................... 24
2-7 ATX V 2.03 Power Supply Installation .............................. 25
2-8 Jumper Settings ..................................................................... 26
2-8.1 How to tackle the Jumpers: ....................................................... 27
2-8.2 JBAT1: Clear CMOS .................................................................. 27
2-8.3 Jp8: CPU Clock/Overclock Select ............................................ 28
2-8.4 JAGP1 & JAGP2: AGP Voltage Select .................................... 29
2-8.5 JDIMM1 & JDIMM2: DIMM Voltage Select ......................... 29
2-8.6 Jp3: K/B or Power Button Select ............................................. 30
2-8.7 Jp4: VGA/AGP4X Safeguard .................................................... 30
2-9 Other Connectors Configuration........................................ 31
2-9.1 On-board FAN Connectors ........................................................ 31
2-9.2 Connector AUX1 .......................................................................... 32
2-9.3 CD-ROM Audio Connectors (CD 1)......................................... 32
2-9.4 Chassis Panel Connectors ......................................................... 33
2-9.5 LAN Connector RJ45 (85MIR-L only) ................................... 33
2-9.6 Thermal Sensor Connectors RT2 and Jp11 ............................ 34
2-9.7 Complex Header .......................................................................... 35
2-9.8 USB Ports and USB Headers ..................................................... 37
2-9.9 Connector CN14: Wake On LAN ............................................. 38
2-9.10 Audio 1: 6-channel Sound Output Connector (optional) ...38
2-9.11 Pin-header DCOM1: for one external serial port............... 39
2-9.12 PS/2 Mouse And PS/2 Keyboard ............................................. 39
2-10 IRQ Description................................................................... 40
Chapter 3 Software Setup ....................................... 42
3-1 Open up the Support CD...................................................... 43
3-2 Install “Intel Chipset Software Installation Utility” ....... 44
6
85MIR / 85MIR-L
3-3 Install “Intel Application Accelerator” ............................. 45
3-4 DirectX Installation............................................................... 47
3-5 Graphics Driver Installation ............................................... 48
3-6 AC’97 Audio Driver Installation ......................................... 49
3-7 Install Hardware Monitor Utility ....................................... 50
3-7.1 Installation ................................................................................... 50
3-7.2 Verification .................................................................................. 51
3-8 Install LAN Drivers (for 85MIR-L only)........................... 52
3-8-1. RTL8139C LAN driver on Windows 9X ................................ 52
3-8-2. RTL8139C LAN driver on Windows NT4.0 .......................... 54
3-8-3. RTL8139C LAN driver on Win ME / 2000 / XP ................... 55
3-9 Install USB 2.0 Driver for Win2000 or WinXP ................ 56
Chapter 4 AMI BIOS Setup.................................... 58
4-1 About BIOS Setup ................................................................. 59
4-2 To Run BIOS Setup ............................................................... 59
4-3 About CMOS .......................................................................... 59
4-4 The POST ( Power On Self Test ) ....................................... 59
4-5 To Update BIOS ..................................................................... 60
4-5.1 Before Updating BIOS ................................................................ 60
4-5.2 Update Process ............................................................................. 60
4-6 BIOS SETUP --- CMOS Setup Utility................................ 62
4-6.1 CMOS Setup Utility .................................................................... 62
4-6.2 Standard CMOS Setup ............................................................... 63
4-6.3 Advanced BIOS Features ........................................................... 66
4-6.4 Advanced Chipset Features ....................................................... 69
4-6.5 Power Management Features .................................................... 72
4-6.6 PNP / PCI Configurations .......................................................... 75
7
Contents
4-6.7 Integrated Peripherals................................................................ 77
4-6.8 Hardware Monitor Status .......................................................... 80
4-6.9 Frequency/Voltage Control ....................................................... 82
4-6.10 Set Supervisor Password .......................................................... 84
4-6.11 Load Optimized Defaults ........................................................ 86
4-6.12 Save & Exit Setup...................................................................... 86
4-6.13 Exit Without Saving .................................................................. 86
APPENDICES.......................................................... 88
Appendix-1 Identify Mainboard Model Number ................... 89
Appendix-2 Technical Terms ...................................................... 90
8
85MIR / 85MIR-L
Mainboard
Support CD
Bundled Bonus Pack CD
Bundled Bonus Pack Manual
Thermal Sensor Cable (optional)
ATA 33/66/100 IDE Cable
FDD Cable
User’s Manual
RS232 Cable (optional)
USB Cable (optional)
ITEM CHECKUP
9
Chapter 1 Specification
Topics included in this chapter are:
1-1 Mainboard Components Locations
1-2 Mainboard Specifications**
1-3 Mainboard Specifications Table
1-4 Chipset Diagram
Introduction
Chapter 1 Specification
This mainboard features an integration of the powerful processor In-
tel Pentium 4 and the single-chip North Bridge Intel 845G. The Intel P4
processor is a rapid execution engine providing 533/400MHz system
bus, while North Bridge Intel 845G is a high performance integrated
chipset providing processor interface, DDR266/200 SDRAM memory
interface, Hub interface, AGP interface as well as an integrated Graph-
ics device with CRT display port.
Integrated with i845G, South Bridge Intel ICH4 supports the LPC
Super I/O, upstream Hub interface, PCI interface, IDE interface, LAN
interface, USB interface, AC’97 Audio interface and the interrupt control.
This chapter is to introduce to users every advanced function of this
high performance integration.
** If any difference is found between the mainboard description
and the Mainboard you are using, please look up the Errata/
Update Slip enclosed inside for the correction or updated
information, or else contact the mainboard Dealer or visit our
Web Site for the latest manual update.
10
85MIR / 85MIR-L
mPGA478B
1
RTL8139C
PCI 1
PCI 2
PCI 3
AC'97
Audio
Li
Battery
BIOS
IT8712F
LPC I/O
i845G
(GMCH)
AGP 4X
1
Peripheral Power
LPT1
COM1
VGA
MIC
GAME/MIDI PORT
LINE
OUT
LINE
IN
USB1 (underside)
1
DIMM1
Main Power
IDE2
IDE1
FD1
+12V Power
1
DCOM1
USB2 USB3
1
10
1
10
FAN1
FAN2
FAN3
1
1
JAGP2
1
JP3
1
JP4
1
JBAT1
11
JDIMM1
JDIMM2
JP8
AUDIO1
1
14
SMI
HDD/LED IRRTX PWR
1
30
SUS LEDKLOCK
SPKR RST
+-
++--
RT2
CD1
1
1
LED1
USB0 (middle)
RJ 45
(on top)
PS/2 K/B (underside)
PS/2 Mouse
(on top)
DDR 266/200MHz
Intel RG82845
i845G
Intel
ICH4
Intel
1
Jp11
2
AUX1
1
JAGP1
CN14
1
DIMM2
ALC650
1-1 SL-85MIR / 85MIR-L Components Locations
RJ45 connector
LAN Controller }for Mainboard 85MIR-L only
Connector Audio 1: Optional on this Series
11
Chapter 1 Specification
1-2 Mainboard Specifications
1-2.1 CPU Socket
CPU Socket 478 on board, supporting Intel®Pentium 4 processors in
478-pin package for :
-- 533/400MHz System Bus;
-- Hyper-pipelined technology;
-- Advanced dynamic execution;
-- Advanced transfer cache;
1-2.2 System Chipsets
North Bridge Intel 845G plus South Bridge Intel ICH4 working with Intel
Pentium 4 Processor for managing and arbitrating operations between
system interfaces:
1-2.3 Memory
2 DDR DIMM 184-pin slots on board for DDR 266/200 SDRAMs :
• Supporting unregistered, non-ECC DDR266/200 SDRAM up to 2 GBs
• Supporting installation of mixed volumes yet same type of DDR
SDRAM modules
• No support for double-sided x16 DDR DIMMs
1-2.4 AMI BIOS
• Supporting Plug & Play V1.0
• Flash Memory for easy upgrade
• Supporting BIOS Writing Protection and Year 2000 compliant
• Supporting BIOS Setup (See Chapter 4 BIOS Setup)
1-2.5 Accelerated Graphics Port (AGP) Interface
AGP Controller embedded on board, supporting:
• 1.5V(4X) power mode only
• 4x AD and SBA signaling, AGP pipelined split-transaction longburst
transfers up to 1GB/sec.
• AGP 4X only, AGP v2.0 compliant
12
85MIR / 85MIR-L
1-2.6 VGA on board
• Built-in VGA Graphics Controller in i845G, supporting one 15-pin con-
nector on board for CRT 2D, 3D VGA display
• VGA display to be safeguarded by jumper setting (see Jumper Setting
section for VGA select)
• VGA Driver enclosed in Support CD for user’s installation
1-2.7 Advanced System Power Management:
• ACPI 1.0B compliant (Advanced Configuration and Power Interface)
• APM V1.2 compliant (See Power Management in BIOS Setup)
• ACPI compliant (See Power Management in BIOS Setup)
• PS/2 Keyboard & Mouse Power On
• Supporting Wake-on-LAN (ring signal) through CN14 connector
• Real Time Clock (RTC) with date alarm, month alarm, and century
field
1-2.8 Multi-I/O Functions :
• PCI EIDE Controller, supporting:
-- 2x Ultra ATA100 / 66 / 33 IDE connectors supporting up to 4 IDE
devices
• Dedicated IR Functions:
-- Third serial port dedicated to IR function either through the two
complete serial ports or the third dedicated port Infrared-IrDA (HPSIR)
and ASK (Amplitude Shift Keyed) IR
• Multi-mode parallel data transfer:
-- Standard mode, high speed mode ECP and enhanced mode EPP
• Floppy Disk connector:
-- One FDD connector supporting 2 floppy drives with drive swap support
• Universal Serial Bus Transfer Mode:
-- USB V2.0 compliant; 480Mb/s USB Bus, supporting Win 2000 or later
operating system
-- USB drivers provided in Support CD for installation
-- 2 built-in USB connectors and 2 USB Headers which
require 2 optional USB cables to provide 4 more optional USB ports
• PS/2 Keyboard and PS/2 Mouse
• UARTs (Universal Asynchronous Receiver / Transmitter):
-- Two complete serial ports (COM1 & DCOM1) on board
13
Chapter 1 Specification
1-2.9 Expansion Slots
• 3 PCI bus Master slots
• 1 AGP 4X slot
• 2 DDR DIMM slots
1-2.10 LAN (Local Area Network) on board (85MIR-L only)
PCI local bus single-chip Fast Ethernet Controller RTL8139C on board:
• Supporting 10/100Mb data transfer
• Supporting Wake On LAN function through the on-board RJ45 LAN
Connector
• LAN Controller Driver enclosed in Support CD for user’s installation
1-2.11 Hardware Monitor on board
• Hardware Monitor in IT8712F, providing monitoring and alarm for
flexible desktop management of hardware voltage, temperatures and
fan speeds.
• Utility Software SmartGuardian for displaying Monitoring status is en-
closed in Support CD for user’s installation.
1-2.12 AC’97 Audio Codec on board
AC’97 Audio Codec 2.2 compliant on board
• Supporting up to 6 channels of PCM audio output
• 6 channel audio consists of Front Left, Front Right, Back Left, Back
Right, Center and Subwoofer for complete surround sound effect
• AC’97 Audio Codec Driver enclosed in Support CD for user’s
installation.
1-2.13 6-channel Audio-out Support (optional)
• This series is designed with an optional 6-channel Audio-out connec-
tor “Audio1”. If this option is chosen, it will provide 3 additional audio-
out ports for the 6-channel sound.
1-2.14 Form Factor
• Micro-ATX Form Factor, ATX power supply, version 2.03 compliant,
supported by one Main Power Connector, one +12V Power Connec-
tor and one Peripheral Power Connector
• Mainboard size: 245mm x 245mm
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere SOLTEK Computerhardware Handbücher
Beliebte Computerhardware Handbücher anderer Marken
EMC2
EMC2 VNX Series Betriebsanleitung
Panasonic
Panasonic DV0PM20105 Bedienungsanleitung
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung
Gigabyte
Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung
Raidon
Raidon iT2300 Bedienungsanleitung
National Instruments
National Instruments PXI-8186 Bedienungsanleitung
