Solutions VT1007 Technisches Handbuch

Talking Thermostat

Key Information

Guide

Models

VT1007, VT2007 & VT2207

Talking Thermostat

Key Information Guide

Models VT1007, VT2007 and VT2207

TOPICS Page(s)

All Settings: Quickly Reviewing ...........................................................12

Bypass Compressor Short Cycle Protector ..........................................5

Calibrate Indoor Temperature................................................................2

Cycle Rate (Setting)...............................................................................3

Fahrenheit to Celsius (Changing to and from).......................................4

Filter, Service and UV Light Alerts –

Default Setting (Months & Optional Hours) ........................................9

Adjusting Months .............................................................................10

Changing to Hours ...........................................................................11

Adjusting Hours ...............................................................................11

Reviewing Months (or Hours) ..........................................................12

Clearing “CHK FILT” Display ............................................................13

Clearing “CFS” Service Display .......................................................13

Clearing “CFS” UV Light Display......................................................13

Resetting Filter Months or Hours (CFS Svc, CFS UVL, CHK FILT ...13

Turning Off CHK FILT Alert .................................................................9

Heat Pump

Activating Emergency Heat (“Eon”)..............................................6, 14

Reducing 2nd Stage Time Delay (“Eon”)................................6, 14, 17

Locking Out Programmable Operation .................................................7

Locking Out All Operations ...................................................................7

Model Number by Type .........................................................................1

Operation Keys (Descriptions & Functions)...........................................1

Program Keys........................................................................................6

Reset Key

Escape Program Mode..........................................................................4

Escapes Faulty Operation (FFr) .............................................................4

Service Alert – (see above Filter, Service and UV Light Alerts)

Troubleshooting Tips ...........................................................................17

Voice On/Off (Set Point Temp UP & DOWN Keys) ................................8

VT2007 2nd Stage Differential – Setting..............................................14

VT2207 2nd Stage Differential – Setting..............................................16

VT2007& VT2207: 2nd Stage Differential Table...................................15

Operation Keys and Alert Light

Model Number by Type

For Custom Message / Warranty Information

Press HELP

For Indoor Temperature and Set Point Temperature

(Also reports Check Filter, Low Battery and Call For Service)

Press REPORT

ALERT LIGHT – When Flashing Press REPORT Key to

hear alert message

To Raise Temperature Press UP

To Lower Temperature Press DOWN

FUNCTION Key

Press BRIEFLY to backlight display screen

Press and HOLD to hear revision number

MODEL Number

VT1007 -- Single Stage Heat / Cool

VT2007 – 2 Stage Heat / Single Stage Cool / Heat Pump

VT2207 – 2 Stage Heat / 2 Stage Cool (NOT for Heat Pumps)

Calibrate Indoor Temperature

Press the UP and DOWN keys together

and HOLD until INDOOR TEMPERATURE

starts to FLASH. RELEASE. Press the UP

or DOWN key to raise or lower INDOOR

TEMPERATURE to the desired setting.

When ﬁnished

press RUN.

NOTE: Indoor Temperature calibration is limited to (+ / -) 3˚ F /

2˚ C from factory default setting. Do not calibrate until unit has

run one complete cycle.

Setting Cycle Rate

Press the UP and DOWN keys together

and HOLD until INDOOR TEMPERATURE

starts to FLASH. RELEASE. Press BOTH

again until Cr1 appears in setpoint location.

Press UP and DOWN key to move to the

desired setting. Press Run.

Cr1 will appear here.

NOTE:

Cr1 = 1 Degree

Cr2 = 2 Degrees

Cr3 = 3 Degrees

CR1

Fahrenheit to Celsius

& Reset Key

To Change From Celsius to Fahrenheit,

Press and HOLD the YES and NO keys

together for 6 seconds.

Reset Key

The RESET key has two primary functions.

1. Escape Program Mode: If, during programming, you

get lost or wish to quit, press RESET. You will exit the

programming mode without making changes.

2. FFr (Escapes Faulty Operation): Static discharge

can cause faulty operation. To correct, press both

the NO and RESET buttons together until the display

disappears. When it reappears, press the RUN button

to accept the FLASHING INDOOR TEMPERATURE.

Bypass Compressor

Short Cycle Protector

If you turn the cooling OFF and back ON in

less than 5 minutes, the unit will activate

the time delay. COOL and DELAY will

FLASH.

Press the NO and FUNCTION keys and

HOLD for 8 seconds. This will disable

the time delay feature for 10 minutes.

COOL will stop FLASHING and DELAY

disappears.

COOL

DELAY

Program Keys

PROGRAM ON / OFF KEY

Press to turn program on or off.

WEEKDAY AND WEEKEND KEYS

Press and follow instructions to change program.

DAY / TIME KEY

Press and follow instructions to change the time

and day of the week.

RUN KEY

Press to advance to next step when programming.

NOTE:

On heat pump models, pressing and holding RUN

and YES will send thermostat into emergency or

reserve heat. This also reduces the Time Delay

between 1st & 2nd stage HEAT to 1 minute. To

restore the default 8-minute delay, perform an

“FFr” Reset per instructions on page 4.

Locking Out Programmed Operation

Locking Out All Operations

Lock out

prevents users

from accidentally

running

programmable

operation. Press

Full lock

out prevents

unauthorized

users from

making changes.

Press and hold

YES and HELP

keys until you

hear “OFF”.

and hold NO and ON/OFF keys for 6 seconds.

Audio plays “OFF” when any program button is

pressed. To unlock, repeat same.

Locks out all functions except the REPORT

and HELP keys. To unlock, repeat same until

you hear “O”.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Solutions Thermostat Handbücher

Solutions

Solutions IsatPhonePRO Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung