Sonnet Thunderbolt Twin 10G Bedienungsanleitung

User’s Guide

for Twin

GBase-T

Gigabit Ethernet Thunderbolt™

Adapter

Contents

1 Introduction, System Requirements, Driver Information 1

2 Twin 10G Description 2

Twin 10G Ports and Indicators

Power Adapter

Thunderbolt Cable

3 Software Installation 4

OS X Driver Download and Installation

4 Twin 10G Adapter Connection 5

5 Verifying Adapter Recognition Using System Report 6

Confirming Thunderbolt and the 10GbE Controller are Recognized

6 Basic Configuration Information 7

7 Tips, General Information, and Known Issues 8

Tips, General Information

Known Issues

8 Specifications, Precautions, FCC Compliance, and Support Information 9

Specifications

Safety Precautions

FCC Compliance

Contacting Customer Service

Visit Our Website

This page left intentionally blank

Chapter 1 – Introduction, System Requirements, Driver Information

Introduction

Congratulations on your purchase! The Twin 10G is a

Thunderbolt 2-to-10 Gigabit Ethernet (10GbE) adapter that

enables you to connect your Mac®with a Thunderbolt port to

10GbE infrastructure.

Connection of the Twin 10G adapter to your computer requires a

single Thunderbolt cable (included), while connection to 10GbE

infrastructure requires the use of CAT-6 or CAT-6A cables.

System Requirements

The Twin 10G adapter requires the following to operate:

• Mac computer with a Thunderbolt 2 or Thunderbolt port

• OS X 10.9 or later

• Thunderbolt cable (included)

• CAT-6 (or CAT-6A) cables

Driver Information

The driver that enables the Twin 10G adapter to work with

your computer must be downloaded from Sonnet’s Website;

instructions follow.

Support Note: For Mac users, this document was up to

date at the time of printing. However, changes to the

hardware or software may have occurred since then. For

Windows users, this document does not include driver

installation instructions and other information. In either case,

Please check the Sonnet website for the latest documentation.

1. Go to www.sonnettech.com/support/kb/kb.php

2. Click the Thunderbolt Product link.

3. Click the Twin 10G link, and then click the Documentation

link.

5. Click the Twin 10G User’s Guide [English] link. For Mac users,

check the Document Version information. If the version listed

is later than this document, click the Download Now button

for the latest version. For Windows users, click the Download

Now button.

Twin 10G Ports and Indicators

1 – RJ45 (10GBase-T) Port 1

Connect a CAT-6 or CAT-6A cable between this port

and the switch’s RJ45 port.

2 – RJ45 (10GBase-T) Port 2

Connect a CAT-6 or CAT-6A cable between this port

and the switch’s RJ45 port.

3 – Link Speed Indicators

When a link is established between the Twin 10G

and the switch, these LEDs light to indicate the link

speed to the switch: green = 10Gb, yellow = 1Gb, off =

100Mb.

4 – Link/Activity Indicators

These LEDs light up green to indicate a link is

established between the Twin 10G and the switch, and

ﬂash green when there is activity between the two.

5 – Security Slot

This slot works with Kensington®brand and similar

security locks to secure the Twin 10G enclosure and

deter theft.

6 – Thunderbolt Ports

Connect a Thunderbolt cable between either of these

ports and your computer’s (or intermediate device’s)

Thunderbolt port; the open port may be used to

connect another Thunderbolt device.

7 – 12VDC Socket

Connect the included DC power adapter between this

socket and the included power cord.

Chapter 2 – Twin 10G Description

Power Adapter

1 – Power Adapter

Connect this to the Twin 10G

adapter’s 12VDC socket. Note that the

power indicator on top lights when

the adapter is connected to AC power.

2 – Power Cord

Connect this between a power outlet

and the power adapter. Note that

the power cord included with your

product may appear different than

the one pictured here, depending on

where the product was purchased.

Thunderbolt Cable

Connect this cable between the Twin

10G adapter and your computer or other

Thunderbolt peripheral device.

Chapter 2 – Twin 10G Description

Chapter 3 – Software Installation

You must install software in order for your computer to support

the Twin 10G adapter.

OS X Driver Download and Installation

This section describes the download and installation of the driver

required to support the Twin 10G adapter.

1. Launch a Web browser and go to www.sonnettech.

com/support, and then click the Downloads, Manual, &

Knowledgebase link.

2. On the Support Categories page, click the Thunderbolt

Product link, and then click the Twin 10G link.

3. On the Twin 10G page, click the Driver link, and then click

the Download Now button next to “Twin 10G Software

(OS X)”; the software will be downloaded.

4. Double-click the dskcd-twin10g-xxxx.dmg (xxxx is the

version) ﬁle; the ﬁle will expand and a new window will

open.

5. Double-click the Sonnet Twin-10G.pkg ﬁle to launch the

driver installer.

6. When the Welcome to the Sonnet Twin 10G Installer window

appears, click Continue.

7. When the Important Information window appears, read the

information, and then click Continue.

8. When the Software License Agreement window appears, read

the agreement, click Continue, and then click Agree.

9. When the Standard Install window appears, click Change

Installation Location to change the items installed if

necessary, change the location or accept the default

installation location, and then click Install.

10.When asked to do so, enter the Administrator password, and

then click Install Software; a warning dialogue appears.

11. Click Continue Installation; the software is installed.

12. When the next window appears, click Restart to restart your

system and ﬁnish the driver installation.

Chapter 4 – Twin 10G Adapter Connection

1. Connect one or two CAT-6 or CAT-6A cables between the ports on

the Twin 10G adapter and the ports on the switch or device

(Figure 1).

2. Connect the included Thunderbolt cable between either Thunderbolt

port on the Twin 10G adapter and a Thunderbolt port on your

computer (or other Thunderbolt device in the chain connected to the

computer). If you are daisy chaining additional Thunderbolt devices,

connect another Thunderbolt cable between the downstream device

and the open Thunderbolt port on the Twin 10G adapter (Figure 2).

3. Connect the included power cord between a wall outlet or

power strip and the power adapter; verify the connector

is plugged in securely. Note that the power adapter’s

power indicator will light at this time.

4. Connect the power adapter cable to the Twin 10G

adapter’s 12V power socket (Figure 2).

Support Note: To ensure the best performance possible when

connecting multiple Thunderbolt devices in a daisy chain, be sure to

connect 20Gbps Thunderbolt 2 devices such as the Twin 10G adapter

closest to the computer, with 10Gbps Thunderbolt devices at the end.

Figure 1

Figure 2

Chapter 5 – Verifying Adapter Recognition Using System Report

Figure 3

Figure 4

Confirming Thunderbolt and the 10GbE

Controllers are Recognized

1. With the Twin 10G adapter connected to a power

source and to the computer, turn on the computer.

Note that if there are any other Thunderbolt devices

connected between the Twin 10G adapter and your

computer, they must also be powered for you to

perform the following steps.

2. From the Apple menu, select About This Mac; the About

This Mac window will appear.

3. Click More Info; a summary of speciﬁcations will

appear.

4. Click System Report; the System Information application

will launch.

5. In the System Report window, click Thunderbolt under

the Hardware header in the left column (Figure 3).

6. In the top right column under the Thunderbolt Device

Tree header, you will see the Thunderbolt Bus, with

“Twin 10G” appearing below it (Figure 3).

7. Click PCI Cards under the Hardware header in the left

column (Figure 4).

8. At the top of the right column, the Twin 10G’s Ethernet

Controllers are listed; detailed information appears

below. You will see “Yes” next to Driver Installed and

Tunnel Compatible (Figure 4).

Support Note: If you do not see “Twin 10G” listed,

disconnect and reconnect the Thunderbolt cable

between the computer and Twin 10G. Note that it is not

necessary to shut down the computer before disconnecting

and reconnecting the cable.

Andere Handbücher für Thunderbolt Twin 10G

Inhaltsverzeichnis

Andere Sonnet Adapter Handbücher

Sonnet

Sonnet Solo10G Thunderbolt 3 Edition Bedienungsanleitung

Sonnet

Sonnet Thunderbolt Twin 10G Bedienungsanleitung

Sonnet

Sonnet PRESTO GIGABIT SERVER PCIe Bedienungsanleitung

Sonnet

Sonnet PRESTO GIGABIT PCIe SERVER Bedienungsanleitung

Sonnet

Sonnet Tempo SATA III 6Gb ExpressCard/34 Bedienungsanleitung

Sonnet

Sonnet Echo Express SE Thunderbolt Bedienungsanleitung

Sonnet

Sonnet PRESTO GIGABIT PCIe BASIC Bedienungsanleitung

Sonnet

Sonnet Thunderbolt 3 Bedienungsanleitung

Sonnet

Sonnet USB 3.0 ExpressCard/34 Bedienungsanleitung

Sonnet

Sonnet DX Thunderbolt Bedienungsanleitung

Sonnet

Sonnet PRESTO GIGABIT USB 3.0 Bedienungsanleitung

Sonnet

Sonnet Solo10G SFP+ Thunderbolt 3 Edition Bedienungsanleitung

Sonnet

Sonnet Thunderbolt Bedienungsanleitung

Sonnet

Sonnet Twin10G Thunderbolt 2 Edition Bedienungsanleitung

Sonnet

Sonnet Thunderbolt Twin 10G Bedienungsanleitung

Sonnet

Sonnet Presto Gigabit Pro PCIe Bedienerhandbuch

Sonnet

Sonnet Solo 10G Bedienungsanleitung

Sonnet

Sonnet Echo ExpressCard Thunderbolt Adapter Bedienungsanleitung

Sonnet

Sonnet PRESTO GIGABIT PCIe PRO Bedienungsanleitung

Sonnet

Sonnet Pro Dual CompactFlash Adapter ExpressCard/34 Bedienungsanleitung

Sonnet

Sonnet Twin10G Thunderbolt 2 Edition Bedienungsanleitung

Sonnet

Sonnet Echo Express SEL 10GbE Bedienungsanleitung

Sonnet

Sonnet Solo10G SFP+ Thunderbolt 3 Edition Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

RCA

RCA AH57R Bedienungsanleitung