Sonoff ZigBee DIY BASICZBR3 Bedienungsanleitung
ZigBee DIY Smart Switch
User manual V1.2
· 中 文 ---------------------- 1-5
· Deutsch ---------------- 11-16
· Français----------------- 23-28
· Русский язык----------35-40
· English--------------------6-10
· Español-----------------17-22
· Italiano---------------- 29-34
· Português--------------41-46
· FCC Warning----------------47
BASICZBR3
SONOFF TECHNOLOGIES CO., LTD. 中⽂
1
本设备需连接SONOFFZigBee关进⾏智能操作。
设备⽀持其他⽆线协议为ZigBee3.0的⽹关，具体以实际产品为准。
使⽤说明
1.断电
ON OF F
ON OF F
ON OF F
ON OF F
设备安装、故障维修请由专业资质电⼯操作，以免发⽣触电危险！设备在正常使⽤的情况下
不可触碰到。
拆下保护盖，先接线再安装压线柱。
2.接线
安装保护盖时确保保护盖上的标识和设备上的标识对⻬，否则⽆法合上。
吸顶灯接线⽰意：
100-240V AC
LED
Driver
L In
N In
L Out
N Out
SONOFF TECHNOLOGIES CO., LTD. 中⽂
2
确保零⽕线接⼊⽆误。
单⽕线输出接线⽰意:
L In
N In
L Out
100-240V AC
N
3.下载“易微联”APP
易 微 联
eWeLink
Android™ & iOS
4.上电
通电后，设备⾸次使⽤，默认进⼊配对状态，ZigBee信号指⽰灯呈“闪烁”状态。
如⻓时间未进⾏下⼀步操作，设备可能退出配对模式，如需再次进⼊，⻓按配对按钮5秒
直到ZigBee信号指⽰灯“闪烁”即可。
SONOFF TECHNOLOGIES CO., LTD. 中⽂
3
5.添⼦设备
ZBB ri dge
已添加设 备:0
暂无子 设备，请添 加
添加
打开eWeLinkAPP，选择需要连接的⽹关，点击添加⼦设备，等待搜索添加设备。
如添加失败，请将设备移近⽹关后再重新添加。
添加设备
正在连接
请让设 备尽量 靠近 网关
25s
找到设备
1个设备 已找到
>
添加⼦设备前，请先连接SONOFF⽹关。
SONOFFZigBee⽹关⽀持同时连接多个⼦设备
添加设备
正在连接
请让设 备尽量 靠近 网关
15s
找到设备
3个设备 已找到
>
先将⽹关通电，设置让所需配对的⼦设备进⼊配对状态，然后打开eWeLinkAPP⽹关⻚⾯，
点击“添加”，等待搜索添加设备。
ZBB ri dge
已添加设 备:0
暂无子 设备，请添 加
添加
SONOFF TECHNOLOGIES CO., LTD. 中⽂
4
EchoStudio
EchoPlus(型:ZE39KL)
2ndGenEchoShow(型:DW84JL)
2ndGenEchoPlus(型:L9D29R)
SamsungSmartThingshub
1.参照⽹关使⽤说明书下载相应APP和连接⽹关。
2.将设备设置到配对模式.
3.根据⽹关对应的APP提⽰添加设备，添加过程中选择eWeLink或SONOFF品牌。
如添加失败，请将设备移近⽹关后再重新添加。
添加说明：
更多APP应⽤平台及⽹关推荐
Amazon Alexa
SmartThings
本设备除⽀持SONOFFZigBee关外，还⽀持以下⽹关：
产品参数
型号
输⼊
输
⽀持平台
材料
产品规格
BASICZBR3
100-240V AC 50/60Hz 10A Max
PC V0
91x43x25mm
Android & iOS
100-240V AC 50/60Hz 10A Max
⼯作温度 -10℃~40℃
ZigBee IEEE 802.15.4
产品介绍
设备重量＜1Kg，建议安装⾼度＜2⽶。
保护盖
配对按钮/⼿动开关 开关指⽰灯(红⾊)
ZigBee信号指⽰灯(绿⾊)
SONOFF TECHNOLOGIES CO., LTD. 中⽂
5
产品特点
SONOFF智能开关(ZigBee版)基于ZigBee线通讯协议，通过连接ZigBee⽹关实现远程控制、
设置定时开/关、设备智能场景联动等功能。
远程控制 智能定时/延时 语⾳控制 智能场景控制
以上功能特点取决于ZigBee⽹关的功能。
分享功能
恢复出⼚设置
在eWeLinkapp端“删除设备”，设备即恢复出⼚设置。
更换设备⽹络
设备更换新的⽹络环境使⽤时，需⻓按设备配对钮5ZigBee指⽰灯闪烁状态，
开，此时设备进⼊快速配⽹模式，即可再添加。
SONOFF TECHNOLOGIES CO., LTD.
6
ON OF F
ON OF F
ON OF F
ON OF F
100-240V AC
LED
Driver
L In
N In
L Out
N Out
English
The device can be operated intelligently via working with the SONOFF ZigBee Bridge.
The device can work with other gateways supporting ZigBee 3.0 wireless
protocol. Detailed information is in accordance with the final product.
Operating Instruction
1. Power off
To avoid electric shocks, please consult the dealer or a qualified professional for
help when installing and repairing! Please do not touch the switch during use.
2. Wiring instruction
Remove the Protective cover, then connect wires before fixing the wire fastener.
To make sure a full installation, please align“ ” with “ ” when securing the
protective cover.
Ceiling lamp wiring instruction：
SONOFF TECHNOLOGIES CO., LTD.
7
English
L In
N In
L Out
100-240V AC
N
One live wire wiring instruction:
Make sure the neutral wire and live wire connection is correct.
3. Download APP
4. Power on
After powering on, the device will enter the pairing mode during the first use and the
ZigBee LED signal indicator flashes.
The device will exit the pairing mode if no next operation for a long time. If enter
again, please long press the pairing button for 5s until the ZigBee LED signal
indicator flashes and release.
eWeLink
eWeLink
Android™ & iOS
SONOFF TECHNOLOGIES CO., LTD.
8
English
5.Add sub-devices
Access eWeLink APP, select the Bridge that you want to connect, and tap “Add” to
add a sub-device, and be patient until pairing completes.
If the addition failed, move the sub-device closer to the Bridge and try again.
>
Connect in g
Kee p the d evi ce cl ose
eno ugh t o the hub.
25s
Add Devic e
Loo king f or dev ice
1 devices Found
ZBB ri dge
Add ed: 0
No ch ild d evice ,plea se add .
Add
Connect the SONOFF ZBBridge before adding the sub-device.
SONOFF ZigBee Bridge supports connecting
multiple sub-devices at the same time.
Connect in g
Kee p the d evi ce cl ose
eno ugh t o the hub.
25s
Add Devic e
Loo king f or dev ice
3 devices Found
>
ZBB ri dge
Add ed: 0
No ch ild d evice ,plea se add .
Add
Power the Bridge on, set the sub-device to the pairing mode. Then access the Bridge
page in the eWeLink APP to tap “Add”, and be patient until the pairing completes.
SONOFF TECHNOLOGIES CO., LTD.
9
English
BASICZBR3
100-240V AC 50/60Hz 10A Max
PC V0
91x43x25mm
Android & iOS
100-240V AC 50/60Hz 10A Max
-10℃~40℃
ZigBee IEEE 802.15.4
This device supports the following gateways besides SONOFF ZigBee：
Echo Studio
Echo Plus (model: ZE39KL)
2nd Gen Echo Show (model: DW84JL)
2nd Gen Echo Plus (model: L9D29R)
Samsung SmartThings hub
More APP application platforms and gateway
recommendations
Gateway adding instruction:
1. Refer to the gateway user manual to download the matched APP and get it paired.
2. Set ZBMINI to the pairing mode.
3. Add ZBMINI according to the prompt of APP. You should select eWeLink or SONOFF
when adding.
If the addition failed, move the sub-device closer to the Bridge and try again.
Amazon Alexa
SmartThings
Specifications
Material
Dimension
Operating systems
Model
Input
Working temperature
Output
Andere Handbücher für ZigBee DIY BASICZBR3
4
Inhaltsverzeichnis
Sprachen:
Andere Sonoff Schalten Handbücher
Sonoff
Sonoff 4CH Bedienungsanleitung
Sonoff
Sonoff Pow R2 Bedienungsanleitung
Sonoff
Sonoff NSPanel-EU Bedienungsanleitung
Sonoff
Sonoff D1 Bedienungsanleitung
Sonoff
Sonoff DIY iFan03 Bedienungsanleitung
Sonoff
Sonoff 4CH Pro Bedienungsanleitung
Sonoff
Sonoff BASICR4 Bedienungsanleitung
Sonoff
Sonoff TX Series Bedienungsanleitung
Sonoff
Sonoff TX Series Bedienungsanleitung
Sonoff
Sonoff ZBMINI Bedienungsanleitung
Sonoff
Sonoff Pow R2 Bedienungsanleitung
Sonoff
Sonoff 4CH Bedienungsanleitung
Sonoff
Sonoff S-MATE2 Bedienungsanleitung
Sonoff
Sonoff 4CH Pro Bedienungsanleitung
Sonoff
Sonoff T0 Bedienungsanleitung
Sonoff
Sonoff ZBMINI Extreme Bedienungsanleitung
Sonoff
Sonoff DIY DUAL R3 Bedienungsanleitung
Sonoff
Sonoff POWR3 Bedienungsanleitung
Sonoff
Sonoff DIY D1 Bedienungsanleitung
Sonoff
Sonoff Pow R2 Bedienungsanleitung
