Sony XR-1300R Bedienungsanleitung

2000 Sony Corporation

FM/MW/LW

Cassette

Car Stereo

3-044-698-11 (1)

Operating Instructions

Manual de instrucciones

Bruksanvisning

Manual de instruções

XR-1300R

For installation and connections, see the supplied installation/connections

manual.

Para obtener información sobre la instalación y las conexiones, consulte el manual

de instalación/conexiones suministrado.

Vi hänvisar till det medföljande häftet angående montering/anslutningar.

Para a instalação e as ligações, consulte o manual de instalação/ligações

fornecido.

Thank you for purchasing this Sony Cassette

Player.

Welcome ! Precautions

•If your car was parked in direct sunlight

resulting in a considerable rise in

temperature inside the car, allow the unit to

cool off before operating it.

•If no power is being supplied to the unit,

check the connections first. If everything is in

order, check the fuse.

•If no sound comes from the speakers of a

two-speaker system, set the fader control to

the centre position.

•When a tape is played back for a long period,

the cassette may become warm because of

the built-in power amplifier. However, this is

not a sign of malfunction.

If you have any questions or problems

concerning your unit that are not covered in

this manual, please consult your nearest Sony

dealer.

To maintain high quality sound

If you have drink holders near your audio

equipment, be careful not to splash juice or

other soft drinks onto the car audio. Sugary

residues on this unit or cassette tapes may

contaminate the playback heads, reduce the

sound quality, or prevent sound reproduction

altogether.

Cassette cleaning kits cannot remove sugar

from the tape heads.

Notes on Cassettes

Cassette care

•Do not touch the tape surface of a cassette, as

any dirt or dust will contaminate the heads.

•Keep cassettes away from equipment with

built-in magnets such as speakers and

amplifiers, as erasure or distortion on the

recorded tape could occur.

•Do not expose cassettes to direct sunlight,

extremely cold temperatures, or moisture.

•Slack in the tape may cause the tape to be

caught in the machine. Before you insert the

tape, use a pencil or similar object to turn the

reel and take up any slack.

•Distorted cassettes and loose labels can cause

problems when inserting or ejecting tapes.

Remove or replace loose labels.

•The sound may become distorted while

playing the cassette. The cassette player head

should be cleaned after each 50 hours of use.

Slack

Cassettes longer than 90 minutes

The use of cassettes longer than 90 minutes is

not recommended except for long continuous

play. The tape used for these cassettes is very

thin and tends to stretch easily. Frequent

playing and stopping of these tapes may cause

them to become entangled in the cassette deck

mechanism.

Table of Contents

Location of controls ................................................. 5

Getting Started

Resetting the unit ................................................ 6

Detaching the front panel .................................. 6

How to use the menu ......................................... 6

Setting the clock .................................................. 7

Cassette Player

Listening to a tape ............................................... 7

Radio Reception during Fast-forwarding or

Rewinding of a Tape

—ATA (Automatic Tuner Activation) ........ 8

Radio

Memorizing stations automatically

—Best Tuning Memory (BTM) .................... 8

Memorizing only the desired stations ............. 9

Receiving the memorized stations.................... 9

RDS

Overview of the RDS function ........................ 10

Displaying the station name ............................ 10

Retuning the same programme automatically

—Alternative Frequencies (AF) ................ 10

Listening to traffic announcements ................ 12

Presetting the RDS stations with the AF and

TA data .......................................................... 12

Locating a station by programme type .......... 13

Setting the clock automatically ....................... 14

Other Functions

Adjusting the sound characteristics ............... 15

Changing the sound and display settings ..... 15

Boosting the bass sound

—D-bass ....................................................... 16

Additional Information

Maintenance ....................................................... 16

Dismounting the unit ....................................... 17

Specifications ..................................................... 18

Troubleshooting guide ..................................... 19

Location of controls

Refer to the pages listed for details.

1MENU button

7, 8, 9, 11, 13, 14, 15

2Volume control dial

3TUNER button 8, 9, 12

4PRST +/– (cursor up/down) buttons

7, 8, 9, 11, 13, 14, 15

During radio reception:

Preset stations select 8, 9

5DSPL/PTY (display mode change/

programme type) button 14

6MODE button

During radio reception:

BAND select 8, 9

7Z(eject) button 7

8Display window

9m/M(fast winding)/DIR (tape

transport direction change) buttons 7

q; D-BASS button 16

qa TA button 12, 13

qs SOUND button 15

qd RELEASE (front panel release) button

6, 17

qf SEEK –/+ (cursor left/right) buttons

7, 8, 9, 11, 13, 14, 15

seek 9

qg Reset button (located on the front side

of the unit behind the front panel) 6

qh ENTER button 7, 8, 9, 11, 13, 14, 15

qj Preset number buttons 9, 11

qk OFF button*6

ql AF button 10, 11, 13

*Warning when installing in a car

without ACC (accessory) position on

the ignition key switch

Be sure to press (OFF) on the unit for two

seconds to turn off the clock display after

turning off the engine.

When you press (OFF) momentarily, the

clock display does not turn off and this

causes battery wear.

XR-1300R

–

MODE

OFF

DIR D-BASS

ENTER

SOUND

RELEASE 1 2 3 4 56

TUNER

DSPL

PTY

TUNER

Attaching the front panel

Attach part Aof the front panel to part Bof

the unit as illustrated and push the left side

into position until it clicks.

Notes

• Be sure not to attach the front panel upside

down.

• Do not press the front panel too hard against the

unit when attaching it.

• Do not press too hard or put excessive pressure

on the display window of the front panel.

• Do not expose the front panel to direct sunlight

or heat sources such as hot air ducts, and do not

leave it in a humid place. Never leave it on the

dashboard of a car parked in direct sunlight or

where there may be a considerable rise in

temperature.

Caution alarm

If you turn the car ignition off without

removing the front panel, the caution alarm

will beep for a few seconds.

If you connect an optional power amplifier and

do not use the built-in amplifier, the beep

sound will be deactivated.

How to use the menu

This unit is operated by selecting items from a

menu.

To select, first enter the menu mode and

choose up/down (+/–of (PRST)), or choose

left/right (–/+ of (SEEK)).

(PRST)

(+) : To select upwards

(–) : To select downwards

Getting Started

Resetting the unit

Before operating the unit for the first time or

after replacing the car battery, you must reset

the unit.

Remove the front panel and press the reset

button with a pointed object, such as a

ballpoint pen.

Note

Pressing the reset button will erase the clock

setting and some memorized functions.

Detaching the front panel

You can detach the front panel of this unit to

protect the unit from being stolen.

1Press (OFF).

2Press (RELEASE), then slide the front

panel a little to the left, and pull it off

towards you.

Notes

• Be sure not to drop the panel when detaching it

from the unit.

•If you detach the panel while the unit is still

turned on, the power will turn off automatically

to prevent the speakers from being damaged.

•When carrying the front panel with you, use the

supplied front panel case.

Reset button

(OFF)

(RELEASE)

Cassette Player

Listening to a tape

Insert a cassette.

Playback starts automatically.

The side facing up is played.

The side facing down is played.

Tip

To change the tape‘s playback direction, press m

and M.

To stop playback and eject the

cassette

Press Z.

Fast-winding the tape

During playback, press mor M.

*The < > indicator will flash while fast-winding

the tape.

To start playback during fast-forwarding or

rewinding, press the other fast-winding button

partially until the locked button is released.

(SEEK)

Setting the clock

The clock uses a 24-hour digital indication.

Example: To set the clock to 10:08

1Press (MENU), then press either side of

(PRST) repeatedly until “CLOCK”

appears.

1Press (ENTER).

The hour indication flashes.

2Press either side of (PRST) to set the

hour.

3Press + side of (SEEK).

The minute indication flashes.

4Press either side of (PRST) to set the

minute.

2Press (ENTER).

The clock starts.

After the clock setting is complete, the

display returns to normal playback mode.

To rewind

Direction

indicator*

FWD

REV

To advance

(–) : To select

leftwards (+) : To select

rightwards

TUNER

Radio

Memorizing stations

automatically

— Best Tuning Memory (BTM)

The unit selects the stations with the strongest

signals and memorizes them in the order of

their frequencies. You can store up to 6 stations

on each band (FM1, FM2, FM3, MW, and LW).

Caution

When tuning in stations while driving, use

Best Tuning Memory to prevent accidents.

1Press (TUNER).

The tuner is turned on.

2Press (MODE) repeatedly to select the

band.

Each time you press (MODE), the band

changes as follows:

BFM1 BFM2 BFM3 BMW BLW

3Press (MENU), then press either side of

(PRST) repeatedly until “BTM”appears.

4Press (ENTER).

The unit stores stations in the order of their

frequencies on the number buttons.

A beep sounds when the setting is stored.

Notes

• The unit does not store stations with weak

signals. If only a few stations can be received,

some number buttons will retain their former

setting.

• When a number is indicated in the display, the

unit starts storing stations from the one currently

displayed.

Radio Reception during

Fast-forwarding or

Rewinding of a Tape

— ATA (Automatic Tuner Activation)

When fast-forwarding or rewinding with the

mor Mbutton, the tuner will turn on

automatically.

1During playback, press (MENU).

2Press either side of (PRST) repeatedly

until “ATA”appears.

3Press + side of (SEEK) to select “ON.”

Play mode starts.

4Press (ENTER).

To return to normal playback mode, select

“OFF”in step 3 above.

Memorizing only the

desired stations

You can preset up to 18 FM stations (6 each for

FM1, 2, and 3), up to 6 MW stations, and up to

6 LW stations in the order of your choice.

1Press (TUNER).

The tuner is turned on.

2Press (MODE) repeatedly to select the

band.

3Press either side of (SEEK) to tune in the

station that you want to store on the

number button.

4Press and hold the desired number

button ((1) to (6)) until “MEM”appears.

The number button indication appears in

the display.

Note

If you try to store another station on the same

number button, the previously stored station will

be erased.

Receiving the memorized

stations

1Press (TUNER).

The tuner is turned on.

2Press (MODE) repeatedly to select the

band.

3Press the number button ((1) to (6)) on

which the desired station is stored.

Tip

Press either side of (PRST) to receive the stations

in the order they are stored in the memory (Preset

Search Function).

If you cannot tune in a preset

station

Press either side of (SEEK) to search for

the station (automatic tuning).

Scanning stops when the unit receives a

station. Press either side of (SEEK)

repeatedly until the desired station is

received.

Note

If the automatic tuning stops too frequently, press

(MENU), then press either side of (PRST)

repeatedly until “LOCAL” (local seek mode) is

displayed. Then press + side of (SEEK) to select

“LOCAL-ON.” Press (ENTER).

Only the stations with relatively strong signals will

be tuned in.

Tip

If you know the frequency of the station you want

to listen to, press and hold either side of (SEEK)

until the desired frequency appears (manual

tuning).

If FM stereo reception is poor

— Monaural Mode

1During radio reception, press (MENU),

then press either side of (PRST)

repeatedly until “MONO”appears.

2Press + side of (SEEK) until “MONO-ON“

appears.

The sound improves, but becomes

monaural (“ST”disappears).

3Press (ENTER).

To return to normal mode, select “MONO-

OFF”in step 2 above.

Retuning the same

programme automatically

—Alternative Frequencies (AF)

The Alternative Frequencies (AF) function

automatically selects and retunes the station

with the strongest signal in a network. By

using this function, you can continuously

listen to the same programme during a long-

distance drive without having to retune the

station manually.

1Select an FM station (page 9).

2Press (AF) repeatedly until “AF-ON”

appears.

The unit starts searching for an alternative

station with a stronger signal in the same

network.

Note

When there is no alternative station in the area

and you do not need to search for an alternative

station, turn the AF function off by pressing (AF)

repeatedly until “AF-OFF”appears.

102.5MHz

96.0MHz

98.5MHz

Frequencies change automatically.

Station

RDS

Overview of the RDS

function

Radio Data System (RDS) is a broadcasting

service that allows FM stations to send

additional digital information along with the

regular radio programme signal. Your car

stereo offers you a variety of services. Here are

just a few: retuning the same programme

automatically, listening to traffic

announcements, and locating a station by

programme type.

Notes

•Depending on the country or region, not all of

the RDS functions are available.

•RDS may not work properly if the signal strength

is weak or if the station you are tuned to is not

transmitting RDS data.

Displaying the station

name

The name of the current station lights up in the

display.

Select an FM station (page 9).

When you tune in an FM station that

transmits RDS data, the station name

appears in the display.

Note

The “*”indication means that an RDS station is

being received.

Inhaltsverzeichnis

Sprachen:

Andere Sony Autoempfänger Handbücher

Sony

Sony CDX-C6850 Bedienungsanleitung

Sony

Sony MEX-N5150BT Bedienungsanleitung

Sony

Sony XR-C5200 Bedienungsanleitung

Sony

Sony CDX-RA700 - Motorized Synchro-flip Detachable... Produkthandbuch

Sony

Sony MEX-BT4000P Bedienungsanleitung

Sony

Sony CDX-M770 - Fm/am Compact Disc Player Produkthandbuch

Sony

Sony XR-CA650X - Fm-am Cassette Car Stereo Produkthandbuch

Sony

Sony CDX-GT550UI (CDX-GT550UI) Produkthandbuch

Sony

Sony HCD-G1 Bedienungsanleitung

Sony

Sony DSX-MS60 Bedienungsanleitung

Sony

Sony XR-4750RDS Bedienungsanleitung

Sony

Sony MEX-BT4150U Bedienungsanleitung

Sony

Sony CXS-GT4016F Produkthandbuch

Sony

Sony XR-4880 Bedienungsanleitung

Sony

Sony CDX-GT40U Bedienungsanleitung

Sony

Sony CDX-C5750 Bedienungsanleitung

Sony

Sony XR-5880R Bedienungsanleitung

Sony

Sony CDX-7520 - Compact Disc Changer Bedienungsanleitung

Sony

Sony CDX-GT285S Bedienungsanleitung

Sony

Sony CDX-CA710X Addendum to Bedienungsanleitung

Sony

Sony CDX-C6800X Bedienungsanleitung

Sony

Sony MDX-C670 Bedienungsanleitung

Sony

Sony CDX-2500R Bedienungsanleitung

Sony

Sony CDX-M8800 - Fm/am Compact Disc Player Produkthandbuch

Beliebte Autoempfänger Handbücher anderer Marken

Motorola

Motorola VWA63 Bedienungsanleitung

Nextar

Nextar D3201 Bedienungsanleitung

Alpine

Alpine CDE-163BT Bedienungsanleitung

Pioneer

Pioneer DEH-P645R Bedienungsanleitung

Axxera

Axxera XDMA7600 Betriebsanleitung

XM OnyX Bedienungsanleitung

Sound Storm

Sound Storm STM93R Bedienungsanleitung

Soundstream

Soundstream VIR-5000 Bedienungsanleitung

Avson

Avson MKT Platform Bedienungsanleitung

Pioneer

Pioneer DVH-P500UB Bedienungsanleitung

JVC

JVC KD-AHD69 Bedienungsanleitung

Blaupunkt

Blaupunkt SANTIAGO CR 87 Bedienungsanleitung

XFIRE AUDIO

XFIRE AUDIO BMW42S Bedienungsanleitung

VDO

VDO CD 2253 Bedienungsanleitung

Volvo

Volvo 13 84 580 Bedienungsanleitung

ZENEC

ZENEC ZE-160DVD Bedienungsanleitung

Medion

Medion Car Audio Bedienungsanleitung

Philips

Philips CEM5000 Bedienungsanleitung