Sony XR-2800 Bedienungsanleitung

1998 by Sony Corporation

3-861-995-11 (1)

Operating Instructions

Mode d’emploi

Manual de instrucciones

Kullanım kılavuzu

FM/MW/LW

Cassette Car

Stereo

XR-2800

For installation and connections, see the supplied installation/connections

manual.

En ce qui concerne l’installation et les connexions, consulter le manuel

d’installation/connexions fourni.

Con respecto a la instalación y las conexiones, consulte el manual de Instalación/

Conexiones suministrado.

Kurma ve bağlantı işlemleri için ünite beraberindeki Kurma/Bağlantılar kılavuzuna

bakınız.

Welcome!

Thank you for purchasing the Sony Cassette

Car Stereo. This unit lets you enjoy a variety of

features by using an optional rotary

commander.

Table of contents

Getting Started

Resetting the unit ................................................ 3

Cassette Player

Listening to a tape ............................................... 3

Playing a tape in various modes....................... 4

Radio

Memorising stations automatically

— Best Tuning Memory (BTM) ................... 5

Memorising only the desired stations.............. 5

Receiving the memorised stations .................... 5

Other Functions

Adjusting the sound characteristics ................. 6

Attenuating the sound ....................................... 6

Changing the sound and beep tone ................. 7

Additional Information

Precautions........................................................... 7

Maintenance......................................................... 8

Removing the unit .............................................. 8

The rotary commander labels ........................... 9

Location of controls .......................................... 10

Specifications ..................................................... 11

Troubleshooting guide ..................................... 12

Index ................................................................... 13

Getting Started

Resetting the unit

Before operating the unit for the first time or

after replacing the car battery, you must reset

the unit.

Press the reset button with a pointed object,

such as a ballpoint pen.

Note

Pressing the reset button will erase all the memorised

programme and memory functions.

Reset button

Getting Started/Cassette Player

Cassette Player

Listening to a tape

Insert a cassette.

Playback will start automatically.

If a cassette is already inserted, press

(SOURCE) repeatedly until “TAPE” is

displayed.

The side facing up is being played.

The side facing down is being played.

Tip

To change the tape transport direction, press (MODE)

(*) during tape playback.

Fast-winding the tape

During playback, press either side of

(SEEK/AMS) for one second.

To start playback during fast-forwarding or

rewinding, press (MODE) (*).

Press

(OFF)

Stop playback

Eject the cassette

Fast-forward

Rewind

TAPE



SEEK

AMS

TAPE



SEEK

AMS

To locate the succeeding tracks

To locate the preceding tracks

Playing a CrO2or Metal tape

Press (4) when you want to listen to a

CrO2(TYPE II) or metal (TYPE IV) tape.

“METAL” appears on the display.

To cancel this mode, press (4) again.

Switching to the radio while fast-

winding a tape

— Automatic Tuner Activation (ATA)

Press (5) during playback.

“ATA” appears on the display.

When fast-forwarding or rewinding with

(SEEK/AMS) for two seconds, the tuner will

turn on automatically.

To cancel this mode, press (5) again.

Skipping blanks during tape

playback — Blank skip

Press (6) during playback.

“BL SKIP” appears on the display.

Blanks longer than eight seconds will

automatically be skipped during tape

playback.

To cancel this mode, press (6) again.

Locating the beginning of a track

— Automatic Music Sensor (AMS)

You can skip up to nine tracks at one time.

During playback, press either side of

(SEEK/AMS) momentarily.

Note

The AMS function may not work when :

• the blanks between tracks are shorter than 4 seconds

• there is noise between tracks

• there are long sections of low volume or quiet sections.

Changing the displayed items

Each time you press (DSPL) momentarilly

during tape playback, the displayed item

changes as follows:

Tape playback ˜Frequency*

*While the ATA function is activated.

Playing a tape in various

modes

Searching for the desired track

— Intro scan

Press (1) during playback.

“INTRO” appears on the display.

The first 10 seconds of all the tracks are played.

When you find the desired track, press again.

The unit returns to the normal playback mode.

To cancel this mode, press (1) again.

Playing tracks repeatedly

— Repeat play

Press (2) during playback.

“REP” appears on the display.

When the current played track is over, it will

be played again from the beginning.

To cancel this mode, press (2) again.

Cassette Player/Radio

Memorising only the

desired stations

Up to 6 stations on each band (FM1, FM2, FM3,

MW and LW) can be stored on the preset

number buttons in the order of your choice.

Therefore, 18 FM stations can be Memorised.

If you try to store another station on the same

preset number button, the most recently stored

station will be erased.

1Press (SOURCE) repeatedly to select the

tuner.

2Press (MODE) repeatedly to select the

band.

3Press (SEEK/AMS) to search for the

station you wish to store on a preset

number button.

4Press the desired preset number button

((1) to (6)) for two seconds.

The number of the selected preset number

button appears on the display.

Receiving the memorised

stations

1Press (SOURCE) repeatedly to select the

tuner.

2Press (MODE) repeatedly to select the

band.

3Press the preset number button

momentarily ((1) to (6)) on which the

desired station is stored.

Radio

Memorising stations

automatically

— Best Tuning Memory (BTM)

This function selects from the currently

received band the stations with the strongest

signals and Memorises them in order of their

frequency.

PREVENTING ACCIDENTS!

When tuning in while driving, use the

automatic tuning instead of manual tuning.

1Press (SOURCE) repeatedly to select the

tuner.

Each time you press (SOURCE), the source

changes as follows:

TAPE ˜TUNER

2Press (MODE) repeatedly to select the

band.

Each time you press (MODE), the band

changes as follows:

FM1 nFM2 nFM3 nMW nLW

3Press (BTM) for two seconds.

Notes

• The unit will not store stations with weak signals on the

preset number buttons. If there are only a few stations

received, some preset number buttons will remain empty.

• When a preset number indicated on the display, the unit

starts storing station from the one currently display.

If you cannot tune in to a preset

station

Press either side of (SEEK/AMS)

momentarily to search for the station

(automatic tuning).

Scanning stops when a station is received.

Press either side of (SEEK/AMS) repeatedly

until the desired station is received.

Note

If the automatic tuning stops too frequently, press

(LCL) to light up “LCL” on the display (local seek mode).

Only the stations with relatively strong signals are tuned

in.

Tip

If you know the frequency, press and hold either side of

(SEEK/AMS) until the desired station is received (manual

tuning).

Other Functions

Adjusting the sound

characteristics

1Select the item you want to adjust by

pressing (SEL) repeatedly.

VOL (volume) nBAS (bass) nTRE

(treble) nBAL (left-right) nFAD (front-

rear)

2Adjust the selected item by pressing

either (+) or (–).

Adjust within three seconds after selecting.

(After three seconds the button will again

serve as the volume control button.)

Attenuating the sound

Press (ATT).

The “ATT” indication flashes.

To restore the previous volume level, press

again.

Additional

Information

Precautions

•If your car was parked in direct sunlight

resulting in a considerable rise in

temperature inside the car, allow the unit to

cool off before operating it.

•If no power is being supplied to the unit,

check the connections first. If everything is in

order, check the fuse.

•If no sound comes from the speakers of a

2-speaker system, set the fader control to the

center position.

•When the tape is played back for a long

period, the cassette may become warm

because of the built-in power amplifier.

However, this is not a sign of malfunction.

If you have any questions or problems

concerning your unit that are not covered in

this manual, please consult your nearest Sony

dealer.

To maintain high quality sound

If you have drink holders near your audio

equipment, be careful not to splash juice or

other soft drinks onto the car audio. Sugary

residues on this unit or cassette tapes may

contaminate the playback heads, reduce the

sound quality, or prevent sound reproduction

altogether.

Cassette cleaning kits cannot remove sugar

from the tape heads.

Changing the sound and

beep tone

Boosting the bass sound — D-Bass

To enjoy clear and powerful bass sound, you

can boost only the low frequency signal with a

sharp curve. This is the effect you get when

use an optional subwoofer system.

For example, you can hear the bass line more

clearly even if the vocal volume remains the

same. You can emphasize and adjust the bass

sound easily with the D-BASS control.

Adjusting the bass curve

Turn the D-BASS control to adjust the

bass level (1, 2 or 3).

“D-BASS” appears in the display.

To cancel, turn the control to the OFF position.

Note

If the bass sound becomes distorted, adjust the D-BASS

control or the volume button.

Attenuating the beep tone

Press (6) while pressing (SEL).

To obtain the beep tone again, press these

buttons again.

Analog D-BASS

Level

Frequency (Hz)

0dB

D-BASS 3

D-BASS 2

D-BASS 1

Radio/Other Functions/Additional Information

Notes on Cassettes

Cassette care

•Do not touch the tape surface of a cassette, as

any dirt or dust will contaminate the heads.

•Keep cassettes ataryway from equipment

with built-in magnets such as speakers and

amplifiers, as erasure or distortion on the

recorded tape could occur.

•Do not expose cassettes to direct sunlight,

extremely cold temperatures or moisture.

•Slack in the tape may cause the tape to be

caught in the machine. Before you insert the

tape, use a pencil or similar object to turn the

reel and take up any slack.

•Distorted cassettes and loose labels can cause

problems when inserting or ejecting tapes.

Remove or replace loose labels.

Cassettes longer than 90 minutes

The use of cassettes longer than 90 minutes is

not recommended except for long continuous

play. The tapes used for these cassettes are

very thin and tend to be stretched easily.

Frequent playing and stopping of these tapes

may cause them to be pulled into the cassette

deck mechanism.

Slack

Maintenance

Fuse Replacement

When replacing the fuse, be sure to use one

with the correct amperage which is stated on

the fuse case. Never use a fuse whose

amperage rating exceeds the one supplied to

the unit as this could cause a malfunction of

the unit.

Warning

Never use a fuse with an amperage rating

exceeding the one supplied with the unit as

this could damage the unit.

Removing the unit

To prevent the unit from being stolen

When you leave your car, remove the unit

from the bracket and take it away with you.

Caution

Be careful when you remove the unit. The rear

of the unit becomes very hot just after

operating it because of a built-in power

amplifer.

Additional Information

The rotary commander

labels

You can control this unit with the optional

rotary commander (RM-X4S).

Some labels are supplied with the rotary

commander. Attach that label which matches

the functions of the master unit and the

mounting position of the rotary commander.

When you mount the rotary commander,

attach the appropriate label, as in the

illustration below.

SEL

DSPL

MODE

SEL

DSPL

MODE

Location of controls

Refer to the pages for further details.

1SEEK/AMS button 3, 4, 5, 6

2SOURCE button (TAPE/TUNER) 3, 5

3(+)(–) (volume/bass/treble/left-right/

front-rear control) button 6

4MODE (*) button

During tuner reception:

BAND select 5

During tape playback:

Transport direction change 3

5OFF button 3

66(eject) button 3

7During radio reception:

Preset number buttons 5

During tape playback:

(1) INTRO button 4

(2) REPEAT button 4

(4) METAL button 4

(5) ATA (Automatic Tuner

Activation) button 4

(6) BL SKIP (Blank Skip) button 4

8Reset button 3

Press this button when you use this unit

for the first time, when you have changed

the car battery, or when the buttons of this

unit do not function properly.

9ATT button 6

!º SEL (control mode select) button 6, 7

!¡ Display window

!™ BTM (Best tuning memory) button 5

!£ DSPL (display mode change) button 4

!¢ LCL button 6

!∞ D-BASS control 7

D-BASS

MODE

SEEK

AMS

SEL

SOURCE

ATT

OFF

213

546

INTRO REPEAT

ATA BL SKIP

BTM LCL

OFF

123

DSPL

METAL

Andere Handbücher für XR-2800

Inhaltsverzeichnis

Sprachen:

Andere Sony Autoempfänger Handbücher

Sony

Sony CDX-GT35U - Fm/am Compact Disc Player Bedienungsanleitung

Sony

Sony CDX-GT230 Bedienungsanleitung

Sony

Sony CDX-GT201C Bedienungsanleitung

Sony

Sony XAV-65 Bedienungsanleitung

Sony

Sony CDX-GT350MP - Fm/am Compact Disc Player Bedienungsanleitung

Sony

Sony 0 CDX-3160 Bedienungsanleitung

Sony

Sony CDX-C7000X - Fm/am Compact Disc Player Bedienungsanleitung

Sony

Sony CDXGT640UI - MP3/WMA/AAC Player CD Receiver Bedienungsanleitung

Sony

Sony CDX-C8850R Bedienungsanleitung

Sony

Sony CDX-3700 Bedienungsanleitung

Sony

Sony XR-C2600 Bedienungsanleitung

Sony

Sony XR-C2604J Bedienungsanleitung

Sony

Sony RXD-700 Bedienungsanleitung

Sony

Sony XR-4950X Bedienungsanleitung

Sony

Sony CDX-F5700 - Fm/am Compact Disc Player Bedienungsanleitung

Sony

Sony XR-CA610X Bedienungsanleitung

Sony

Sony CDX-GT222 Produkthandbuch

Sony

Sony MDX-C6500X Bedienungsanleitung

Sony

Sony CDX-S2050C Produkthandbuch

Sony

Sony XR-C8220 Bedienungsanleitung

Sony

Sony CDX-F5510 (XT-XM1) Bedienungsanleitung

Sony

Sony DSX-A40UI Bedienungsanleitung

Sony

Sony CDX-3160 Bedienungsanleitung

Sony

Sony CDX GT11W - Radio / CD Player Bedienungsanleitung

Beliebte Autoempfänger Handbücher anderer Marken

Motorola

Motorola VWA63 Bedienungsanleitung

Nextar

Nextar D3201 Bedienungsanleitung

Alpine

Alpine CDE-163BT Bedienungsanleitung

Pioneer

Pioneer DEH-P645R Bedienungsanleitung

Axxera

Axxera XDMA7600 Betriebsanleitung

XM OnyX Bedienungsanleitung

Sound Storm

Sound Storm STM93R Bedienungsanleitung

Soundstream

Soundstream VIR-5000 Bedienungsanleitung

Avson

Avson MKT Platform Bedienungsanleitung

Pioneer

Pioneer DVH-P500UB Bedienungsanleitung

JVC

JVC KD-AHD69 Bedienungsanleitung

Blaupunkt

Blaupunkt SANTIAGO CR 87 Bedienungsanleitung

XFIRE AUDIO

XFIRE AUDIO BMW42S Bedienungsanleitung

VDO

VDO CD 2253 Bedienungsanleitung

Volvo

Volvo 13 84 580 Bedienungsanleitung

ZENEC

ZENEC ZE-160DVD Bedienungsanleitung

Medion

Medion Car Audio Bedienungsanleitung

Philips

Philips CEM5000 Bedienungsanleitung