Sony XR-CA410 Bedienungsanleitung

2001 Sony Corporation

FM/MW/LW

Cassette

Car Stereo

XR-CA400

XR-CA410

For installation and connections, see the supplied installation/connections

manual.

Informace o instalaci a zapojení naleznete v přiložené příručce Instalace /

zapojení.

Szczegóły otyczące instalacji i po łączeń, proszę spraw zić w ostarczonym,

osobnym po ręczniku

Kurma ve bağlantı işlemleri için ünite beraberindeki Kurma/Bağlantılar kılavuzuna

bakınız.

П орядок установки и подключения магнитолы описан в прилагаемой

инструкции об установке/подключении.

3-226-701-31 (1)

Operating Instructions

Návo k obsluze

Instrukcje Obsługi

Kullanım kılavuzu

Руководство по эксплуатации

FM/MW/LW Cassette Car Stereo

Welcome !

Thank you for purchasing this Sony Cassette

Player. This unit lets you enjoy a variety of

features using the following controller

accessory:

Optional accessory

Rotary commander RM-X4S

In addition to the cassette playback and radio

operations, you can expand your system by

connecting an optional CD/MD unit*1.

When you operate this unit or a connected

optional CD unit with the CD TEXT function,

the CD TEXT information will appear in the

display when you play a CD TEXT disc*2.

*1You can connect a CD changer, an MD changer,

a CD player, or an MD player.

*2A CD TEXT disc is an audio CD that includes

information such as the disc name, artist name,

and track names.

This information is recorded on the disc.

Precautions

•If your car was parked in direct sunlight

resulting in a considerable rise in

temperature inside the car, allow the unit to

cool off before operating it.

•If no power is being supplied to the unit,

check the connections first. If everything is in

order, check the fuse.

•If no sound comes from the speakers of a

two-speaker system, set the fader control to

the centre position.

•When a tape is played back for a long period,

the cassette may become warm because of

the built-in power amplifier. However, this is

not a sign of malfunction.

If you have any questions or problems

concerning your unit that are not covered in

this manual, please consult your nearest Sony

dealer.

To maintain high quality sound

If you have drink holders near your audio

equipment, be careful not to splash juice or

other soft drinks onto the car audio. Sugary

residues on this unit or cassette tapes may

contaminate the playback heads, reduce the

sound quality, or prevent sound reproduction

altogether.

Cassette cleaning kits cannot remove sugar

from the tape heads.

Notes on Cassettes

Cassette care

•Do not touch the tape surface of a cassette, as

any dirt or dust will contaminate the heads.

•Keep cassettes away from equipment with

built-in magnets such as speakers and

amplifiers, as erasure or distortion on the

recorded tape could occur.

•Do not expose cassettes to direct sunlight,

extremely cold temperatures, or moisture.

•Slack in the tape may cause the tape to be

caught in the machine. Before you insert the

tape, use a pencil or similar object to turn the

reel and take up any slack.

•Distorted cassettes and loose labels can cause

problems when inserting or ejecting tapes.

Remove or replace loose labels.

•The sound may become distorted while

playing the cassette. The cassette player head

should be cleaned after each 50 hours of use.

Slack

Cassettes longer than 90 minutes

The use of cassettes longer than 90 minutes is

not recommended except for long continuous

play. The tape used for these cassettes is very

thin and tends to stretch easily. Frequent

playing and stopping of these tapes may cause

them to become entangled in the cassette deck

mechanism.

Table of Contents

With Optional EquipmentThis Unit Only

Location of controls ................................................. 5

Getting Started

Resetting the unit ................................................ 6

Detaching the front panel .................................. 6

Setting the clock .................................................. 7

Cassette Player

Listening to a tape ............................................... 7

Playing a tape in various functions .................. 8

Radio

Memorizing stations automatically

— Best Tuning Memory (BTM).................... 9

Memorizing only the desired stations ............. 9

Receiving the memorized stations.................... 9

RDS

Overview of the RDS function ........................ 10

Displaying the station name............................ 10

Retuning the same programme automatically

— Alternative Frequencies (AF) ................. 11

Listening to traffic announcements ................ 12

Presetting the RDS stations with the AF and

TA data .......................................................... 13

Locating a station by programme type .......... 14

Setting the clock automatically ....................... 15

Other Functions

Labelling the rotary commander .................... 15

Using the rotary commander .......................... 16

Adjusting the sound characteristics ............... 17

Attenuating the sound ..................................... 17

Changing the sound and display settings ..... 18

Boosting the bass sound

— D-bass ....................................................... 18

Selecting the sound position

— “My Best sound Position” ..................... 19

CD/MD Unit

Playing a CD or MD ......................................... 19

Playing tracks repeatedly

— Repeat Play .............................................. 21

Playing tracks in random order

— Shuffle Play .............................................. 21

Additional Information

Maintenance....................................................... 21

Removing the unit ............................................ 22

Specifications ..................................................... 23

Troubleshooting guide ..................................... 24

Location of controls

Refer to the pages listed for details.

1Volume +/– button 7, 13, 17

2MODE (o) button

During tape playback:

Playback direction change 7, 8

During radio reception:

BAND select 9

During CD/MD playback:

CD/MD unit select 19

3SRC (SOURCE) (TUNER/TAPE/CD/MD)

button 7, 9, 19

4SEL (select) button 7, 15, 17, 18, 19, 20

5Display window

6MBP (My Best sound Position)

button 19

7D (D-BASS) button 18

8Z(eject) button 7

9RELEASE (front panel release) button

6, 22

q; ATT (attenuate) button 17

qa SENS/BTM button 9, 10, 13

qs RESET button (located on the front side

of the unit behind the front panel) 6

qd AF button 11, 13

qf Number buttons 8, 9, 12, 15, 18, 20, 21

During radio reception:

Preset number select 9, 12

During tape playback:

(3) REP 8

(5) BL SKIP 8

(6) ATA 8

During CD/MD playback:

(1) DISC – 20

(2) DISC + 20

(3) REP 21

(4) SHUF 21

qg TA button 12, 13

qh PTY/MTL (programme type/Metal)

button 8, 14

qj DSPL (display mode change) button

7, 10, 19, 20

qk OFF button*6, 7

ql SEEK/AMS +/– button

8, 9, 10, 11, 14, 20

Seek 9

Automatic Music Sensor 8, 20

Manual search 10, 20

*Warning when installing in a car

without ACC (accessory) position on

the ignition key switch

Be sure to press (OFF) on the unit for two

seconds to turn off the clock display after

turning off the engine.

When you press (OFF) momentarily, the

clock display does not turn off and this

causes battery wear.

XR-CA400/CA410

RELEASE

SENS

AF123456TA

PTY

SEEK

AMS

DSPL

BTM MTL

ATT

SEL

MODE

SRC

OFF

D-BASS

MBP

DISC REP SHUF BL SKIP ATA

SOURCE

Attaching the front panel

Attach part Aof the front panel to part Bof

the unit as illustrated and push the left side

into position until it clicks.

Notes

• Be sure not to attach the front panel upside

down.

• Do not press the front panel too hard against the

unit when attaching it.

• Do not press too hard or put excessive pressure

on the display window of the front panel.

• Do not expose the front panel to direct sunlight

or heat sources such as hot air ducts, and do not

leave it in a humid place. Never leave it on the

dashboard of a car parked in direct sunlight or

where there may be a considerable rise in

temperature.

Caution alarm

If you turn the car ignition off without

removing the front panel, the caution alarm

will beep for a few seconds.

If you connect an optional power amplifier and

do not use the built-in amplifier, the beep

sound will be deactivated.

Getting Started

Resetting the unit

Before operating the unit for the first time or

after replacing the car battery, you must reset

the unit.

Remove the front panel and press the RESET

button with a pointed object, such as a

ballpoint pen.

Note

Pressing the RESET button will erase the clock

setting and some memorized functions.

Detaching the front panel

You can detach the front panel of this unit to

protect the unit from being stolen.

1Press (OFF).

2Press (RELEASE), then slide the front

panel a little to the left, and pull it off

towards you.

Notes

• Be sure not to drop the panel when detaching it

from the unit.

•If you detach the panel while the unit is still

turned on, the power will turn off automatically

to prevent the speakers from being damaged.

•When carrying the front panel with you, use the

supplied front panel case.

RESET button

(OFF)

(RELEASE)

Cassette Player

Listening to a tape

Insert a cassette.

Playback starts automatically.

If a cassette is already inserted, to start

playback, press (SRC) repeatedly until

“TAPE”appears.

The side facing up is played.

The side facing down is played.

Tip

To change the tape‘s playback direction, press

(MODE) (o).

To Press

Stop playback (OFF)

Eject the cassette Z

continue to next page t

Setting the clock

The clock uses a 24-hour digital indication.

Example: To set the clock to 10:08

1Press (DSPL) for two seconds.

The hour indication flashes.

1Press either side of the volume button

to set the hour.

2Press (SEL).

The minute indication flashes.

3Press either side of the volume button

to set the minute.

2Press (DSPL).

The clock starts.

After the clock setting is complete, the

display returns to normal playback mode.

to go forward

to go back

to go forward

to go back

Fast-winding the tape

During playback, press and hold either

side of (SEEK/AMS).

To start playback during fast-forwarding or

rewinding, press (MODE) (o).

Locating a specific track

— Automatic Music Sensor (AMS)

During playback, press either side of

(SEEK/AMS) momentarily for each track

you want to skip.

You can skip up to nine tracks at one time.

Note

The AMS function may not work when:

— the blanks between tracks are shorter than

four seconds

— there is noise between tracks

— there are long sections of low volume or quiet

sections.

To locate preceding tracks

To locate succeeding tracks

SEEK

AMS

AF123456TA

PTY

MTL

DISC REP SHUF BL SKIP ATA

Playing a tape in various

functions

You can play the tape in various functions:

•REP (Repeat Play) repeats the current track.

•BL SKIP (Blank Skip) skips blanks longer

than eight seconds.

•ATA (Automatic Tuner Activation) turns on

the tuner automatically when fast-winding

the tape.

•MTL (Metal) lets you play a metal or CrO2

tape.

During tape playback, press the desired

function button repeatedly until “ON”in

the display appears.

Function buttons

(3): REP

(5): BL SKIP

(6): ATA

(PTY): MTL

Example: ATA function

ATA function starts.

To return to normal playback function, select

“OFF.”

Rewind

Fast-forward

SEEK

AMS

Radio

Memorizing stations

automatically

— Best Tuning Memory (BTM)

The unit selects the stations with the strongest

signals and memorizes them in the order of

their frequencies. You can store up to 6 stations

on each band (FM1, FM2, FM3, MW, and LW).

Caution

When tuning in stations while driving, use

Best Tuning Memory to prevent accidents.

1Press (SRC) repeatedly to select the

tuner.

Each time you press (SRC), the source

changes as follows:

BTUNER BCD*1

TAPE*2bMD*1b

*1If the corresponding optional equipment is

not connected, this item will not appear.

*2If a tape is not inserted, this item will not

appear.

2Press (MODE) repeatedly to select the

band.

Each time you press (MODE), the band

changes as follows:

BFM1 BFM2 BFM3 BMW BLW

3Press (SENS) (BTM) for two seconds.

The unit stores stations in the order of their

frequencies on the number buttons.

A beep sounds when the setting is stored.

Notes

• The unit does not store stations with weak

signals. If only a few stations can be received,

some number buttons will retain their former

setting.

• When a number is indicated in the display, the

unit starts storing stations from the one currently

displayed.

Memorizing only the

desired stations

You can preset up to 18 FM stations (6 each for

FM1, 2, and 3), up to 6 MW stations, and up to

6 LW stations in the order of your choice.

1Press (SRC) repeatedly to select the

tuner.

2Press (MODE) repeatedly to select the

band.

3Press either side of (SEEK/AMS) to tune

in the station that you want to store on

the number button.

4Press the desired number button ((1) to

(6)) until “MEM”appears.

The number button indication appears in

the display.

Note

If you try to store another station on the same

number button, the previously stored station will

be erased.

Receiving the memorized

stations

1Press (SRC) repeatedly to select the

tuner.

2Press (MODE) repeatedly to select the

band.

3Press the number button ((1) to (6)) on

which the desired station is stored.

continue to next page t

RDS

Overview of the RDS

function

Radio Data System (RDS) is a broadcasting

service that allows FM stations to send

additional digital information along with the

regular radio programme signal. Your car

stereo offers you a variety of services. Here are

just a few: retuning the same programme

automatically, listening to traffic

announcements, and locating a station by

programme type.

Notes

•Depending on the country or region, not all of

the RDS functions are available.

•RDS may not work properly if the signal strength

is weak or if the station you are tuned to is not

transmitting RDS data.

Displaying the station

name

The name of the current station lights up in the

display.

Select an FM station (page 9).

When you tune in an FM station that

transmits RDS data, the station name

appears in the display.

Note

The “*”indication means that an RDS station is

being received.

Changing the display item

Each time you press (DSPL), the item changes

as follows:

Station Name*(Frequency) yClock

*When you tune in an FM station that transmits

RDS data, the station name appears.

Note

“NO NAME”appears if the received station does

not transmit RDS data.

If you cannot tune in a preset

station

—Automatic tuning/ Local Seek Mode

Automatic tuning:

Press either side of (SEEK/AMS) to search

for the station.

Scanning stops when the unit receives a

station. Press either side of (SEEK/AMS)

repeatedly until the desired station is

received.

Local Seek Mode:

If the automatic tuning stops too

frequently, press (SENS) repeatedly until

“LOCAL-ON”appears.

“LCL”indicator is displayed.

Only the stations with relatively strong

signals will be tuned in.

Tip

If you know the frequency of the station you want

to listen to, press either side of (SEEK/AMS) until

the desired frequency appears (manual tuning).

If FM stereo reception is poor

—Monaural Mode

During radio reception, press (SENS)

repeatedly until “MONO-ON”appears.

“MONO”indicator is displayed.

The sound improves, but becomes

monaural (“ST”disappears).

To return to normal mode, select “MONO-

OFF.”

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Sony Autoempfänger Handbücher

Sony

Sony XR-4750RDS Bedienungsanleitung

Sony

Sony XR-C5600X Leitfaden

Sony

Sony CDX-C90R Bedienungsanleitung

Sony

Sony CDX-4000RX Bedienungsanleitung

Sony

Sony MEX-DV1500U Bedienungsanleitung

Sony

Sony MDX-C8900 Bedienungsanleitung

Sony

Sony CDX-GT620 Bedienungsanleitung

Sony

Sony MEX-DV2000 - DVD Player With Radio Bedienungsanleitung

Sony

Sony XR-F5100 Installation/Connections Bedienungsanleitung

Sony

Sony CDX-GT710 - Fm-am Compact Disc Player Bedienungsanleitung

Sony

Sony CDX-DAB700U Bedienungsanleitung

Sony

Sony XR-C6100 Bedienungsanleitung

Sony

Sony XAV-W651BT Bedienungsanleitung

Sony

Sony CDX CDX-GT23 Bedienungsanleitung

Sony

Sony XSP-N1BT Bedienungsanleitung

Sony

Sony CDX-GT35UW - Fm/am Compact Disc Player Bedienungsanleitung

Sony

Sony CDX-MP50 Produkthandbuch

Sony

Sony CDX-GT66UPW Bedienungsanleitung

Sony

Sony CDX-L510X - Fm/am Compact Disc Player Bedienungsanleitung

Sony

Sony XR-4880 Bedienungsanleitung

Sony

Sony Xplod CDX-GT130 Produkthandbuch

Sony

Sony MGS-X1 - Mg Memory Stick System-up Player Produkthandbuch

Sony

Sony CDX-GT150 Bedienungsanleitung

Sony

Sony XAV-602BT Bedienungsanleitung

Beliebte Autoempfänger Handbücher anderer Marken

Motorola

Motorola VWA63 Bedienungsanleitung

Nextar

Nextar D3201 Bedienungsanleitung

Alpine

Alpine CDE-163BT Bedienungsanleitung

Pioneer

Pioneer DEH-P645R Bedienungsanleitung

Axxera

Axxera XDMA7600 Betriebsanleitung

XM OnyX Bedienungsanleitung

Sound Storm

Sound Storm STM93R Bedienungsanleitung

Soundstream

Soundstream VIR-5000 Bedienungsanleitung

Avson

Avson MKT Platform Bedienungsanleitung

Pioneer

Pioneer DVH-P500UB Bedienungsanleitung

JVC

JVC KD-AHD69 Bedienungsanleitung

Blaupunkt

Blaupunkt SANTIAGO CR 87 Bedienungsanleitung

XFIRE AUDIO

XFIRE AUDIO BMW42S Bedienungsanleitung

VDO

VDO CD 2253 Bedienungsanleitung

Volvo

Volvo 13 84 580 Bedienungsanleitung

ZENEC

ZENEC ZE-160DVD Bedienungsanleitung

Medion

Medion Car Audio Bedienungsanleitung

Philips

Philips CEM5000 Bedienungsanleitung