Sony XVM-B62 Bedienungsanleitung
XVM-B62
2006 Sony Corporation
Operating Instructions
Mode d’emploi FR
Mobile Monitor
2-666-477-11 (1)
US
Owner’s Record
The model and serial numbers are located on the bottom of the unit.
Record the serial number in the space provided below.
Refer to these numbers whenever you call upon your Sony dealer regarding this
product.
Model No. XVM-B62 Serial No.
2
Welcome!
Thank you for purchasing the Sony
Mobile Monitor.
•PAL or NTSC color system compatible
•Wide, Zoom, and Full screen modes
available, in addition to the normal
screen mode.
•The low reflection liquid crystal panel
reduces the glare from outside lighting
sources.
•Adjustable brightness control,
according to lighting conditions
•Backlight dimmer control produces
sharp contrast image, free from
reversed or blurred colors.
•2Video inputs are provided for
connecting a video player and video
game.
Warning
For the customers in the United
States
This product contains mercury.
Disposal of this product may be
regulated if sold in the United States.
For disposal or recycling information,
please contact your local authorities or
the Electronics Industries Alliance
(http://www.eiae.org).
Warning if your car’s ignition has no
ACC position
After turning the ignition off, be sure to press
(POWER) to turn off the unit.
Otherwise, the display does not turn off and
this causes battery drain.
3
Table of contents
Warning ................................................. 2
Welcome! ............................................... 2
Precautions............................................ 4
Location of controls ............................. 6
Operation
Changing the menu settings .............. 7
Connections
Installation diagram ............................ 8
Connection diagram ............................ 9
Additional Information
Attaching and detaching the
monitor............................................ 10
Maintenance ....................................... 11
Specifications ...................................... 12
Troubleshooting ................................. 12
4
DRIVE MODE
Precautions
To avoid the risk of serious injury or
accident, read the following
precautions before installing and
operating the unit.
On safety
Comply with your local traffic rules and
regulations.
•While driving, the driver must not
watch or operate the monitor. It may
lead to distraction and cause an
accident.
Park the car in a safe place when the
driver watch and operate the monitor.
Watching video pictures
The video pictures appear only after
you park the car and set the parking
brake.
When the car starts moving, the
video pictures automatically
disappear after displaying the
following caution.
Do not operate equipment connected
to the monitor or watch the monitor
while driving.
The caution above appears only
when the monitor is installed on the
dashboard.
•After installing
-Take care not to bump your head
against the unit when getting up
from the back seat.
-Do not leave the monitor under
direct sunlight for a long period of
time.
On installation
•Installing this unit requires technical
expertise.
This unit should be installed by a
qualified technician or service
personnel.
• If you try to install this unit by
yourself, do it properly, referring to
the installation and wiring diagrams
in this operating manual. Improper
installation may result in fire or
electric shock.
• Before installation, be sure to turn the
ignition switch to the OFF position or
take the key out. Installing this unit
with the ignition on may cause battery
drain or a short circuit.
• Do not damage any pipes, tubes, the
fuel tank or electric wiring when
installing this unit. This can cause a
fire. If you drill a hole in car panels,
make sure that any hidden car parts
will not be damaged.
• Do not use any nuts or bolts for safety
devices such as steering linkage, fuel
supply or braking systems. This can
cause a fire or an accident.
• Take care to prevent cords and wires
from getting tangled or crimped in the
moving portion of a seat rail.
5
Where to install
Before installing this unit, please check
your local traffic rules and regulations.
Do not install this unit where:
-It will obstruct the driver’s view.
-It will obstruct the operation of the
airbag system.
-It will obstruct the operation of the
vehicle, especially the steering
wheel, shift lever, or brake pedal.
-Adriver or passengers may injure
themselves when getting into or out
of the car.
If you have any questions or problems
concerning your unit that are not
covered in this manual, please consult
your nearest Sony dealer.
6
Location of controls
1INPUT/ button
Press to select the desired input
source, VIDEO 1 or VIDEO 2.
2DIMMER/ button
Press to select the dimmer On/Off.
3MENU button
4POWER button
Monitor
1234
7
The default settings are underlined.
Picture
Settable range: 0 to 63 (default setting is
“36”)
Adjusting the contrast.
Brightness
Settable range: 0 to 63 (default setting is
“30”)
Adjusting the brightness.
Color
Settable range: 0 to 63 (default setting is
“34”)
Adjusting the color.
Hue
Adjust this if the picture is reddish or
greenish. The default setting is “CTR
(center)”.
”Hue” is displayed for NTSC system only.
Video Adjust
Resetting the picture, brightness and colour
setting at single operation.
Note
Input channel, color system for the input
video signal (PAL/NTSC), screen mode, and
blue background setting will not be reset
when you reset the adjustments.
Mode
Full, Normal, Wide, Zoom
Setting the screen mode.
Full: An image with an aspect ratio of 4
to 3 enlarged to the left and right
edges of the screen (regular image).
Normal: An image with an aspect ratio of 4
to 3.
Wide: An image with an aspect ratio of 4
to 3, with only the left and right
sides of the image being enlarged to
fill the screen.
Zoom: An image with an aspect ratio of 4
to 3 enlarged to the left and right
edges of the screen, with the
overflowing parts (top and bottom)
cut off to fill the screen.
Blue Back
On, Off
Setting the blue background screen.
Select NTSC or PAL System
NTSC, PAL
Usually it is not necessary to change this
setting because this unit automatically
determines the color system depending on
the signal type. Select either NTSC or PAL
depending on the system of your local area
when the picture is distorted.
The setting value of the
item selected appears in this
area.
Operation
Changing the menu
settings
You can adjust the display settings
manually.
MENU
1Press (MENU).
The “Picture” screen appears.
Picture 32
Press+/-,or MENU.
Each time you press (MENU), the
setting screen changes in the
following sequence:
Picture tBrightness tColor t
Hue*tVideo Adjust tMode t
Blue Back tSelect NTSC or PAL
System tMenu Off
*Appears only when the NTSC color
system is selected.
2Press or to adjust to the
desired setting.
See the following for the setting
options.
8
Connections
Installation diagram
Refer to the installation diagram and ask a qualified technician for the installation of
the unit.
Be sure to securely fasten all
equipment to the car chassis, etc., to
prevent them moving while your car
is in motion.
Front Left
speaker
Rear Left
speaker
Subwoofer
Tweeter
Left
Head unit
Tweeter
Right
Front Right
speaker
Rear Right
speaker
Mobile
Monitor
Notes
•All equipment other than one Mobile
Monitor is optional.
•To attach the monitor using the supplied
collar, consult the store you purchased
this unit or your nearest Sony dealer.
9
To a metal surface of the car
chassis
Fuse (10 A)Red
Black
Black
L/C filter
To the parking brake switch
cord (see page 10)
(To a metal surface of the car
chassis when you attach the
monitor to the headrest)
VIDEO 1 IN
VIDEO 2 IN
Connection diagram
Refer to the connection diagram for the proper connections.
Mobile monitor XVM-B62
(6.2-inch wide color LCD Monitor)
Video in cable (3 m)
Light green
DVD player, video CD
player, etc.
To the +12 V power
terminal which is
energized in the
accessory position of
the ignition key switch
10
Additional
Information
Attaching and detaching
the monitor
Detaching the monitor from the
collar
Note
Be careful not to pull out the cable too
much when detaching the monitor from
the collar.
Insert a plastic card (not supplied)
between the collar and the top of the
monitor.
The catches are released, and you can
detach the monitor from the collar.
Attaching the monitor to the collar
Set the monitor to the collar securely
until you hear click sound.
Plastic card (not supplied) collar
When installing the
monitor on the dashboard
Be sure to connect the parking cord
(Light green) to the parking brake
switch cord. The mounting position of
the parking brake switch cord depends
on your car. Consult your car dealer or
your nearest Sony dealer for further
details.
Using the tap
Attach the supplied tap to the end of the
parking cord (Light green) and the
parking brake switch cord.
x
Note
If the parking brake switch cord is too thin,
connect the parking cord (Light green) to
the parking brake switch cord directly
without using the tap.
Foot brake type
Parking brake
switch cord
Hand brake type
Parking brake
switch cord
Parking brake
switch cord
Tap (supplied)
Parking cord
(Light green)
Andere Handbücher für XVM-B62
2
Inhaltsverzeichnis
Sprachen:
Andere Sony Auto-Videosystem Handbücher
Sony
Sony XAV-622 Bedienungsanleitung
Sony
Sony MV-900SDS - Dream System 3 Bedienungsanleitung
Sony
Sony XAV-72BT Bedienungsanleitung
Sony
Sony XAV-A1 - Av Center Bedienungsanleitung
Sony
Sony XAV-A1 - Av Center Produkthandbuch
Sony
Sony XAV-63 Produkthandbuch
Sony
Sony DVX-11A - Car Mp3/dvd/cd Single Player Leitfaden
Sony
Sony XVM-862 Bedienungsanleitung
Sony
Sony XAV-622 Bedienungsanleitung
Sony
Sony XAV-60 - 6.1 Inch Avc Produkthandbuch
Sony
Sony XNV-L66BT Bedienungsanleitung
Sony
Sony XVM-R75 Bedienungsanleitung
Sony
Sony MV7101DS - Mobile DVD Dream System Leitfaden
Sony
Sony XAV-60 - 6.1 Inch Avc Bedienungsanleitung
Sony
Sony MV7101DS - Mobile DVD Dream System Bedienungsanleitung
Sony
Sony XAV-622 Produkthandbuch
Sony
Sony XAV-72BT Bedienungsanleitung
Sony
Sony XVM-H65 - Monitor Bedienungsanleitung
Sony
Sony XDS1000 Bedienungsanleitung
Sony
Sony XAV-C1 Bedienungsanleitung
