Sony CD-PC50 Bedienungsanleitung

SON'Yo

Compact Disc Player

CDP-C40

CDP-C50

3-769-921-23 (2)

DIGITAL AUOtO

Operating Instructions

Before operating the unit, please read this manual thoroughly

and retain it for future reference.

CDP-C50

Difference between the CDP-C40 and the CDP-C50

This manual covers the CDP-C40 and the CDP-C50.

Their performance and operation are identical except that for the CDP-C40, a remote

commander is not supplied and a headphones jack, a phone level control, and a

timer switch are not provided.

The illustrations used in this manual are of the CDP-C50.

Onsafety

•Operate the unit only on 120V AC, 60 Hz.

•Should any liquid or solid object fail into the cabinet,

unplug the unit and have it checked by qualified personnel

before operating it any further.

•Unplug the unit from the wall outlet if it will not be used for

a long time. To disconnect the cord, pull it out by grasping

the plug. Never pull the cord itself.

•As the laser beam used in this compact disc player is

harmful to the eyes, do not attempt to disassemble the

cabinet. Refer servicing to qualified personnel only.

On operation

When the unit is not used, turn the power off, to conserve

energy and to extend the useful life of your unit,

Important

Since the CD system boasts a wide dynamic [ange, the

peaks of high levelinputs are recorded with high fidelity,

and the noise level is verylow.

Do not turn up the volume while listening to a portion with

no audio signals or very low level inputs• If you do, the

speakers may be damaged when a peak level portion is

played.

For detailed safety precautions, see the leaflet "IMPORTANT

SAFEGUARDS".

If you have any questions or problems concerning your unit,

please contact your nearest Sony dealer.

PICKING UP THE UNIT FOR SHOP REPAIR

•Lock the optical system Transitkey

The white transit key on the bottom exterior of

the unit protects the optical system against

shock during transportation. Before operating

tf_eCD player, be sure to remove the key by

following the instructions on the label, and

store it in a safe place.

• Remove the customer's disc

When transporting the unit, replace the key in

its originalhole and lock it in place.

After being certain the customer's disc is

unrelated to the problem be sure to remove it

and leave it with the customer.

If the CD player is inoperative the disc can be

removed manually as shown in the illustration.

The compact disc player is equipped with 5 disc trays

which allow you to choose from a large number and wide

variety of selections.

Any disc at any time

can be played usingtheDISCSELECTbuttons.

Multiple functions include:

•PROGRAM play which allows you to play up to 32

selections on any disc in any desired order.

•SHUFFLE play for playing selections in random order.

•REPEAT play for playing a single selection, a single disc, or

all the discs again.

• Turn off the amplifier before making connections.

•Be sure to insert the plugs firmly into the jacks. Loose connections may cause hum and noise.

•Leave a little slack in the connecting cord to allow for inadvertent shock or vibration.

• Connect the red plug of the supplied connecting cord to the right-channel jack (R)of the amplifier and the white plug to the

left-channel jack (L).Otherwise, the right and left channels will be reversed.

CD player

Audio signal connecting cord

(supplied)

to an AC outlet

Speaker system Amplifier

SPEAKER

to an AC outlet

Control Identification

Refer to the pages indicated in • for details.

DISC SELECT buttons _)

TIME button ®

Display window

POWER switch _)

TIMER switch ®

(CDP-C50 only)

Disc compartment , .

_I_1_1_(AMS*/RMS* *) buttons

G)®

,'--DISC SKiP button O(D

PHONE LEVEL control

(CDP-C50only)

]

HEADPHONES jack

(CDP-C50 only)

__ OPEN/CLOSE button

O®

• (stop) button _)

Remote control sensor •I I (playlpause) button _)

*AMS is the abbreviation of AutOmatic Music Sensor.

* *RMS is the abbreviation of Random Music Sensor

Control Identification

TIME button _) SHUFFLE PLAY button (D

DISC SELECT buttons (_) (_)

TRACK selectors (numeric buttons) (D (_)--

I_ (play) button (

II (pause) button _)

• (stop) button (

rbutton (_

(program) button (_)

3K (program check) button (_

(program clear) button (_)

(AMS) buttons (D (_)

(manual search) buttons (I)

Once the power switch is turned on, you can remotely control various functions of the player from a distance. Use the remote

commander supplied with the CDP-C50. For the CDP-C40, use the one supplied with the Sony stereo systems.

Operations controlled or not controlled by the remote commander

Operation CDP-CSO CDP-C40

Music selection using the numeric buttons OK NO

Direct disc selection OK NO

Skipping discs NO OK

Manual search OK NO

Program play OK OK

Checking the programmed selections OK NO

Shuffle play OK OK

Repeat play OK OK

Turning the power on and off NO NO

Opening the disc compartment NO NO

Notes on the remote commander and remote control operation

•Keep the commander away from extremely hot or humid places

• Avoid dropping any foreign obiects into the commander casing,

particularly when replacing the batteries.

•To avoid a malfunction, do not simultaneously depress two or

more buttons,

• Avoid exposure of the remote control sensor to direct sunlight or

fighting apparatus. Such exposure can cause a malfunction

Stopping play

To pause during play

To stop play

To stop play and open

the compartment

Press • II (or II on the remote

commander).

To restart play, press • II (11)

again.

Press II.

Press _.

To close the compartment, press

_Aor the compartment itself.

1Depress POWER.

2 Press

The compartment will open.

3press DISC SKIP so that the Disc 1 tray

rotates into the front position.

4Put the disc in the DISC 1 tray with the

label side up.

5To play more than one disc, repeat steps 3

and 4 to put additional discs in the order

you want.

6Press DISC SELECT 1.

The compartment will close and play will

begin from the first selection on the disc in

the DISC 1 tray.

Selection No,

being played _ r Index No.

I Appears under the tray No. Elapsed play ng

I being played, time

Shows that the tray is occupied,

If the circle around atray number blinks

The disc in that tray is upside down, dirty, or has flaws. Place an empty tray in the front position, and put the disc in it

if you insert the disc into a tray other than the one in the front, the

unit may not be able to find the disc, Be sure to use DISC SKIP to

rotate to the next empty tray,

Nots on 8 cm CD singles

You can play an 8cm CD single or_the inside circle of the tray. Do

not put a normal CD (size of 12 cm) over it.

To display the total number of selections

If you press __or the compartment itself to close the

compartment, the total number of selections and the total

playing time are displayed for a few seconds.

-- 7 e9tO II 12 _3 t4 t_ 16

When a disc containing more than 16selections is

inserted, _ (meaning: "over 16 selections") appears.

To display the time remaining in aselection

Press TIME once during play or pause.

liP" I- 3. L_

-- _ $ 6 ?6 91o111_131_1_16

To return to the normal display, press TIME three times.

To display the amount of time elapsed on the disc

Press TIME twice.

d I_ C /

-- ii 12 13 _4 is 16

TO returnto the normal display, press TIME twice,

To display the remaining time of the disc

Press TIME three times.

-2 _c,.2 8 _

__ ,o ii 12 13 14 is It,

To return to the normal display, press TIME once.

Notes on discs

Handle the disc by its edge.

To keep the disc clean, do

not touch the surface. Do not stick paper or tape.

Thisw_ /Not this way

Do not expose the disc to direct sunlight or heat sources such as

hot air ducts, or leave it in a car parked in direct sunlight where

there can be aconsiderable rise in thetemperature.

ByusingtheDISCSELECTbuttonsortheDISCSKIPbutton

duringplay,youcanlocatethebeginningofanydisc.

Toselect a particular disc Press the

corresponding DISC

SELECT button.

To move to the disc tray next Press DISC SKIP.

to the current one

Locating a point in sequence (Manual Search)

You can locate a particular point in a selection during play by

monitoring the high-speed sound.

To go back at high speed

To go ahead at high speed Keep <1<1pressed.

Keep _pressed.

Release the button when you reach the point in tile selection

you want.

Locating a selection in sequence (Automatic Music

Sensor)

You can locate the beginning of aselection on the disc being

played.

Tolocate thebeginningofthe

selectionbeingPlayed Press_once.

Tolocatethebeginning ofthe

nextselection. PressIH_ once.

Continue to press until the selection you wanted has been

located.

Locating a selection directly

(possible only when using the remote commander of the

CDP-C50)

Pressthe numeric buttons (1to 10) to enter the desired track

number.

To choose directly • selection whose number Is greater than 10

(possible only when using the remote commander of the CDP-CSO)

Use the [_ button and [] to [] buttons.

Ex. To play from track NO. 32 Ex. To play from track No. 30

1Press +_threetimes. 1 Press[_ twice.

2Press_]. 2 Press[].

If, within approx. 5 seconds, no button is pressed after [_], [_

will function as the _]button

What is this Indication?

"- - - -" indication will appear in the display window instead of

numbers, if a selection numbered 21 or higher is selected.

To locate at high speed

Press <HI or _ in the pause mode. Search speed will increase

three times, but there will be no sound. Find the desired point by

watching the numbers in the display.

To return to normal play mode

PressPGMagain.

1Press PGM.

2Press the DISC SELECT button which

corresponds to the disc you want.

corresponds to the selection you want,

® _34s

:, 'r,,i,,dTo program additional selections on a same

disc, repeat step 3.

To program additional selections on another

disc, repeat steps 2 and 3.

To play the programmed selections

Press • (or • II on the main unit).

To insert a pause into your program

(possible onlywith the CDP.C50)

While programming, press II at a point between two

selections• When the program isplayed and reaches this

point, the disc will stop and stand by until you press II

again.

This function allows you to change the tape when making a

recording.A pause cannot be programmed first in the

program line up.

IP3

@®34s

-- I 234567_1 9_ _12 13 14 Is 15

P(pause) has been programmed, It is 3rd in the program line

up.

The maximum selection number which can be programmed

On the disc in the DISC 1 tray; up to the 99th selection

On the disc in the other trays; up to the 30th selection

To display the total playing time of the program

Press TIME before starting play•

"" ,'a 36.2S_

0303 3 ", s ......

To display the time remaining in a selection

Press TIME once while the unit is in the play or pause mode.

To return to normal display, press TIME once more.

To program while observing the disc labels

You can program the selections with tr_edisc compartment opera.

When s program is full

_J _r __appears and no more selections can be added.

L) I

Space between selections

There is a3 second blank between each programmed selection.

However, when consecutive selections (e.g. 4th - 5th) from one

disc are added to a program, the original amount of time between

the selections is retained.

You can play up to 32 selections in the desired order.

1 Pre.PQ..

2 Press D. SELEOT (disc skip) to move the disc tray.

:3 Choose the selection by pressing t,4<1 or li,_.

(To choose a whole disc, press Ibll_, and then

1,44.)

4Press PGM again.

5To program additional selections on a same disc,

repeat steps 3 and 4.

To program additional selection on another disc,

repeat steps 2, 3 and 4.

To play the pmgremmed selections

PressI_ (or I_11 on the main unit).

To return to normal play mode

PressPGMagain.

To program a whole disc under a single program

number

Simply press the DISC SELECT button which corresponds to

the disc you want. The TRACK indicator will show R, which

means that all the selections on the disc have been

programmed under a single program number.

To program shuffle play

PressSHUFFLE PLAY when adding an entire disc to your

program.All the selections on that disc will be played in

random order. Shuffle play will not affect the other selections

in your program. SHUFFLE PLAY cannot be used while a

program is being played. (See page 15,)

The program will be cleared in the following

situations

••ispressedduringstop.

•__ispressedduringprogramplay.

•Poweristurnedoff,

Skipping to the next selection programmed

Press _during play.

Going back to the beginning of the selection being played

Press _during play,

To play a selection not Included in the program

Press PGM again. PGM will disappear and you can then play

another selection on a disc. This operation does not clear the

programmed selections, and you can resume program play by

pressing II, PGM, and then I_.

To stop program play

Press II. The last selection number programmed will be

displayed.

To resume play, press I_. Play begins from the beginning of the

program.

Andere Handbücher für CD-PC50

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sony CD-Player Handbücher

Sony

Sony TCM-S67V Bedienungsanleitung

Sony

Sony CFD-E100 Bedienungsanleitung

Sony

Sony DVP-FX770 Bedienungsanleitung

Sony

Sony CFD ZW755 - Portable CD / Cassette Bedienungsanleitung

Sony

Sony Xplod CDX-737 Bedienungsanleitung

Sony

Sony CFD-770 Bedienungsanleitung

Sony

Sony Discman D-E307CK Bedienungsanleitung

Sony

Sony MZ-R50 Analog PCLink Bedienungsanleitung

Sony

Sony CFD-CD777S MK2 Bedienungsanleitung

Sony

Sony CFD-C1000 - Boombox With Cd Bedienungsanleitung

Sony

Sony MZ-E30 Bedienungsanleitung

Sony

Sony CFD-980 Operating Instructions (English,... Bedienungsanleitung

Sony

Sony Walkman D-FJ041 Bedienungsanleitung

Sony

Sony D-NF400 - ATRAC Walkman Portable CD Player Bedienungsanleitung

Sony

Sony CDX-757MX - Compact Disc Changer System Bedienungsanleitung

Sony

Sony CFD ZW755 - Portable CD / Cassette Bedienungsanleitung

Sony

Sony D-SJ303 - Sports Cd Walkman Gebrauchs- und Wartungshandbuch

Sony

Sony Walkman MZ-R30 Bedienungsanleitung

Sony

Sony ZS-E5 Marketing Specifications (Aqua) Bedienungsanleitung

Sony

Sony walkman MZ-S1 Bedienungsanleitung

Sony

Sony Discman D-171 Bedienungsanleitung

Sony

Sony Discman D-T405 Bedienungsanleitung

Sony

Sony Walkman D-EJ101CK Bedienungsanleitung

Sony

Sony CFD-V6 Bedienungsanleitung

Beliebte CD-Player Handbücher anderer Marken

RCA

RCA RP-7923 Bedienungsanleitung

Pioneer

Pioneer DEH-P3550MP XM Bedienungsanleitung

Philips

Philips AZ1207 Bedienungsanleitung

Philips

Philips CD582 Bedienungsanleitung

Philips

Philips AZ 6821 Bedienungsanleitung

Lasonic

Lasonic MSU-2020 Bedienungsanleitung

THOMSON

THOMSON RCD150 Bedienungsanleitung

Denon

Denon DCD-1420 Bedienungsanleitung

Panasonic

Panasonic SJ-MR100 Bedienungsanleitung

Onkyo

Onkyo DX-7210 Bedienungsanleitung

Denon

Denon DVM-4800 Bedienungsanleitung

JBL

JBL MR-32 Bedienungsanleitung

RCA

RCA RCD152 Bedienungsanleitung

Technics

Technics SL-PS770A Bedienungsanleitung

Clarion

Clarion compact disc Bedienungsanleitung

Philips

Philips Expanium AZ 1538 Bedienungsanleitung

Rotel

Rotel RCD 975 Bedienungsanleitung

Pioneer

Pioneer CLD-D790 Bedienungsanleitung