Sony CDP-CE575 - Disc Carousel Bedienungsanleitung

Compact Disc

Player

4-233-301-32 (1)

CDP-CE575

Operating Instructions

Mode d’emploi

Bedienungsanleitung

Manual de instrucciones

Gebruiksaanwijzing

Bruksanvisning

Istruzioni per l’uso

Instrukcja obslugi

FRPL

About this manual

The instructions in this manual is for CDP-CE575.

Tip

Instructions in this manual describe the controls on

the player.

You can also use the controls on the remote if they

have the same or similar names as those on the

player.

WARNING

To prevent fire or shock hazard, do not

expose the unit to rain or moisture.

To avoid electrical shock, do not open the cabinet.

Refer servicing to qualified personnel only.

This appliance is classified as a CLASS 1 LASER

product. The CLASS 1 LASER PRODUCT

MARKING is located on the rear exterior.

AC power cord must be changed only at the qualified

service shop.

Do not install the appliance in a confined space, such

as a bookcase or built-in cabinet.

To prevent fire, do not Cover the ventilation of the

apparatus with news papers, table-cloths, curtains,

etc. And don’t place lighted candles on the apparatus.

To prevent fire or shock hazard, do not place vases on

the appartus.

Don’t throw a battery, dispose

it as the injurious wastes.

Table of Contents

Parts Identification 4

Front Panel ..............................................................................................................................4

Rear Panel................................................................................................................................ 4

Remote Control ....................................................................................................................... 5

Getting Started

Inserting Batteries Into the Remote Control............................................................................ 6

Hooking Up the System ..........................................................................................................6

Connecting Another CD Player...............................................................................................8

Playing CDs

Loading a CD .......................................................................................................................... 9

Playing the CD –– Normal Play/Shuffle Play/Repeat Play..................................................... 9

Using the CD display ............................................................................................................11

Replacing Discs While Playing a Disc..................................................................................12

Programming the CD tracks ..................................................................................................13

Fading In or Out ....................................................................................................................14

Recording From CDs

Recording a CD by Specifying Tape Length (Time Edit)..................................................... 14

Adjusting the Recording Level (Peak Search) ......................................................................15

Storing Information About CDs (Custom Files)

What You Can Do With the Custom Files ............................................................................16

Labeling Discs (Disc Name) .................................................................................................16

Using the Player with Another Component

Controlling Another CD Player (Advanced Mega Control) .................................................18

Playing Alternately (No-Delay Play/X-Fade Play) ..............................................................19

Additional Information

Using the CONTROL A1II control system...........................................................................20

Precautions ............................................................................................................................22

Notes on CDs.........................................................................................................................23

Troubleshooting.....................................................................................................................24

Specifications ........................................................................................................................24

FRGB

CHECK qh (13)

CLEAR qj (13, 14, 16, 17)

CONTINUE 2(9, 13, 15, 18)

DISC 1–5 3(9, 10, 13)

Disc compartment ws (9)

DISC SKIP 9(9, 12, 13)

Display 4(11)

EX-CHANGE 8(12, 15)

FADER ql (14, 20)

MEGA CONTROL 0(18, 19)

MENU wf (8, 16, 17)

PEAK SEARCH qk (15)

PHONES jack wh (10)

POWER 1(7, 9, 16)

PROGRAM qd (9, 13, 18)

Remote sensor wa (6)

REPEAT qf (10, 18)

SHUFFLE qs (9, 10, 18)

TIME EDIT qg (14)

TIME/TEXT w; (11)

X-FADE/NO DELAY wg (19, 20)

Parts Identification

Front Panel

The items are arranged in alphabetical order.

Refer to the pages indicated in parentheses ( ) for details.

Rear Panel

2ND CD IN jacks 3(8)

ANALOG OUT L/R jacks 4(6)

CONTROL A1II jacks 1(6, 20)

DIGITAL OUT OPTICAL jack 2(7)

Mains lead 5(6)

BUTTON DESCRIPTIONS

AOPEN/CLOSE wj (7, 9, 10, 11)

H5(9, 13, 15, 18, 20, 22)

X6(10, 15, 18, 22)

x7(10, 15, 18)

lAMSL(DISC) dial qa (10,

13, 15, 17, 18, 19)

m/M(AMS+/–) wd (10, 14, 17,

18)

Parts Identification

Remote Control

ANALOG OUT LEVEL +/–wh (6,

7, 10)

CD1/2/3 switch 1(7)

CHECK 9(13)

CLEAR ws (13, 14, 16, 17)

CONTINUE 3(9, 13, 15, 18)

DISC/CAPS 6(10, 17)

DISC SKIP +/–qh (9, 12, 13)

ENTER wa (17)

FADER/DEL w; (14, 20)

HIGH-LIGHT wd (12)

MEGA CONTROL 4(18, 19)

MUSIC SCAN qa (10)

NAME INPUT qs (17)

NO DELAY ql (19, 20)

Number buttons 7(10, 13, 17)

PROGRAM qj (9, 13, 18)

REPEAT 0(10, 18)

SHUFFLE 2(9, 10, 18)

TIME/TEXT/SPACE 5(11, 17)

X-FADE qk (19, 20)

BUTTON DESCRIPTIONS

>10 8(10, 13)

Nwf (9, 13, 15, 18, 20, 22)

Xqd (10, 15, 18, 22)

xwg (10, 15, 18)

./> qf (10, 13, 15, 17, 18,

19)

m/Mqg (10, 14, 17, 18)

Getting Started

Inserting Batteries Into

the Remote Control

You can control the player using the supplied

remote.

Insert two R6 (size AA) batteries by matching

the + and –on the batteries to the diagram

inside the battery compartment.

Insert the negative (–) end first, then push in

and down until the positive (+) end clicks into

position.

When using the remote, point it at the remote

sensor on the player.

Tip

When the remote no longer operates the system,

replace both batteries with new ones.

Note

•Do not leave the remote near an extremely hot or

humid place.

•Do not drop any foreign object into the remote

casing, particularly when replacing the batteries.

•Do not expose the remote sensor to direct sunlight

or lighting apparatuses. Doing so may cause a

malfunction.

•If you don’t use the remote for an extended period

of time, remove the batteries to avoid possible

damage from battery leakage and corrosion.

Hooking Up the System

Hookups

This section describes how to hook up the CD

player to an amplifier. Be sure to turn off the

power of each component before making the

connections.

Tips

•You can adjust the analog output level to the

amplifier using the remote comes with this player.

Press ANALOG OUT LEVEL +/–on the remote.

You can reduce the output level up to –20 dB.

When you reduce the analog output level, “FADE”

appears in the display.

•If you have a Sony component with the CONTROL

A1II jack, connect the component via the

CONTROL A1II jack. You can simplify the

operation of audio systems composed of separate

Sony components. For details, see “Using the

CONTROL A1II control system”on page 20.

CD player

Audio input

(White) (L)

: Signal flow

Amplifier

To mains

Audio input

(Red) (R)

ANALOG OUT

(Red) (R) ANALOG OUT

(White) (L)

To mains

Getting Started

Making digital hookups

If you have a digital component such as a

digital amplifier, D/A converter, DAT, or MD,

connect the component via the DIGITAL OUT

(OPTICAL) connector using the optical cable

(not supplied). Take off the cap and plug in the

optical cable.

Note that you cannot use the following

functions when making this connection:

•Fading In or Out (see page 14)

•Adjusting the output level using the

ANALOG OUT LEVEL +/–buttons on the

remote

Note

When you connect via the DIGITAL OUT

(OPTICAL) connector, noise may occur when you

play CD software other than music, such as a CD-

ROM.

POC-15

Optical cable (not supplied)

Digital component

CD player

DIGITAL

OUT

OPTICAL

DIGITAL

INPUT

OPTICAL

When using another Sony CD player

in conjunction with this player

You can set the supplied remote to be effective

on this player only.

•If the other player’s command mode can be set:

Set the CD1/2/3 switch of this player’s remote to

CD1 (factory setting), and set the other player’s

remote to CD2 or CD3.

•If the other player’s command mode cannot be set:

Set the CD1/2/3 switch of this player’s remote to

CD2 or CD3.

When you change the command mode of the

remote, you have to set the command mode of each

player. For details, see “Changing the command

mode of the player”on page 8.

Transporting the player

Before transporting the player, follow the

procedure below to return the internal

mechanisms back to their original position.

1Remove all the discs from the disc tray.

2Press AOPEN/CLOSE to close the

disc tray.

“–NO DISC–” appears in the display.

3Wait for 10 seconds, then press

POWER to turn off the player.

Connecting Another CD

Player

If you have a Sony CD player in which 5, 50,

200, 300, or 400 discs can be inserted and

which is equipped with the CONTROL A1II

(or CONTROL A1) jack and the command

mode of that player can be set to CD 3, you can

control that player as the second player with

this player. After connecting this player and an

amplifier, follow the procedure below.

Be sure to turn off the power of each player

before making this connection.

1Connect the players with an audio cord

(see also “Hookups” on page 6).

2Connect the players with a monaural

(2P) mini-plug cord.

For details on this connection, see “Using

the CONTROL A1II control system”on

page 20.

3Set the command mode of this player

to CD1 (factory setting) or CD2, and set

that of the second player to CD3.

Check the display for the current command

mode of this player, if the mode is CD3,

you have to change the mode as described

below.

When the setting of both players is

complete, set the CD1/2/3 switches on each

remote accordingly.

For details on how to operate the second

player, see “Controlling Another CD

Player”on page 18 and “Playing

Alternately”on page 19.

Notes

•Do not connect a player other than that you use as

the second player to the 2ND CD IN jacks of this

player.

•When connecting a second CD player, do not

connect the DIGITAL OUT (OPTICAL) connector

of this player to the amplifier.

Changing the command mode

of the player

1Press MENU.

2Turn lAMS Lto select

“COMMAND MODE.”

3Push lAMS L.

The current command mode appears.

4Turn lAMS Lto select CD1 or

CD2, then push lAMS Lagain.

CDP-CE575 To ANALOG OUT

To 2ND CD IN

CDP-CX400, etc.

: Signal flow

To audio input

To audio output

Amplifier

CONTROL

A1II

Playing CDs

Playing the CD

––Normal Play/Shuffle Play/Repeat

Play

This unit lets you play the CD in different play

modes.

1Select the play mode.

2Press H.

Tips

•You can select the disc you want to start playing

first by pressing one of the DISC 1 –5 buttons.

•You can specify discs during ALL DISCS Shuffle

Play mode, and the tracks on the specified discs are

played in a random order.

Press DISC 1 –5 to specify the discs after Step 1.

Semi-circles appear around the specified disc

numbers in the display. To cancel the selected discs,

press DISC 1 –5 again. The semi-circles disappear.

To return to ALL DISCS Shuffle Play, press

SHUFFLE until “ALL DISCS SHUFFLE”appears

in the display.

Loading a CD

1Turn on the amplifier and select the CD

player position so that you can listen to

the sound from this player.

2Press POWER to turn on the player.

3Press AOPEN/CLOSE.

The disc compartment slides out.

4Place a disc on the disc tray with the

label side up.

5To place other discs, press DISC SKIP

and place the discs in the order you

want to play.

Each time you press the button, the disc tray

turns and you can place the discs in the

empty disc compartments. The player plays

the disc in front of you first.

6Press AOPEN/CLOSE to close the disc

compartment.

Playing CDs

Disc number

When you play a CD

single, place it on the

inner circle of the tray.

continued

Getting Started

To play

All discs in the player

consecutively in the

order of disc number.

Only the disc you’ve

selected.

All tracks on all discs

in random order.

All tracks on the

specific disc in

random order.

The tracks on the CD

in the order you want

them to be played (see

“Programming the CD

tracks”on page 13).

Press

CONTINUE repeatedly

until “ALL DISCS”

appears.

CONTINUE repeatedly

until “1 DISC”appears.

SHUFFLE repeatedly

until ”ALL DISCS

SHUFFLE”appears.

SHUFFLE repeatedly

until ”1 DISC

SHUFFLE”appears.

PROGRAM.

Select a track directly

Go to the next disc

Select a disc directly

Find a point in a track

By scanning each track

for 10 seconds

(Music Scan)

Play tracks in random

order

Remove the CD

Adjust the volume

* When you directly locate a track numbered over 10,

press >10 first, then the corresponding number

buttons. To enter “0,”use button 10.

Example: To play track number 30

Press >10 first, then 3 and 10.

Tips

•You can adjust the analog output level with the

ANALOG OUT LEVEL +/–on the remote (page

6).

•You can adjust the headphones volume on the

remote. To adjust the volume, connect the

headphones to the PHONES jack and adjust the

volume with the ANALOG OUT LEVEL +/–on

the remote.

•If there is no CD in the player, “–NO DISC–”

appears in the display.

Notes

•If “OVER”appears in the display, the disc has

reached the end while you were pressing M. Press

mor turn lAMSLcounterclockwise to go

back.

•If you press ANALOG OUT LEVEL +/–while

recording, the recording level will change even

when it is preset on the tape deck, etc.

Do this

Press the number button on

the remote.*

Press DISC SKIP.

Press DISC 1 –5.

When using the remote,

follow the procedure below.

1 Press DISC.

2 Press the number button

of the disc.

3 Press ENTER.

Press and hold Mor m

during playback, and

release at the desired point.

Press MUSIC SCAN. When

you find the track you want,

press Hto start playing

the track. Each time you

press MUSIC SCAN, the

playing time changes

cyclically.

Press SHUFFLE until

“SHUFFLE”appears in the

display.

Press AOPEN/CLOSE.

Press ANALOG OUT

LEVEL +/–on the remote.

Repeat Play Operations

You can play the CD tracks repeatedly in any

play modes.

To activate the Repeat Play function, press

REPEAT until “REPEAT’appears in the

display.

Repeat only one track

Cancel Repeat Play

When you are in the Repeat Play function, the

player repeats the tracks as follows:

When the disc is

played in

Continuous Play

(ALL DISCS)

Continuous Play

(1 DISC)

Shuffle Play

(ALL DISCS)

Shuffle Play

(1 DISC)

Programme Play

(page 13)

Other Operations

Stop playback

Pause

Select a track

Press REPEAT

Until “REPEAT 1”appears

while playing the track you

want to repeat.

Until “REPEAT”or

“REPEAT1”disappears.

The player repeats

All the tracks on all discs

All the tracks on the current

disc

All the tracks on all discs in

random orders

All the tracks on the current

disc in random orders

The same programme

Playing the CD (continued)

Do this

Press x.

Press X. Press Xagain or

Hto resume play.

During play or pause, turn

lAMSLclockwise

(to go forward) or

counterclockwise (to go

backward) (or press >(

to go forward) or . (to

go backward) on the

remote).

Andere Handbücher für CDP-CE575 - Disc Carousel

Inhaltsverzeichnis

Sprachen:

Andere Sony CD-Player Handbücher

Sony

Sony D-NF340 Bedienungsanleitung

Sony

Sony CDX-415RF Bedienungsanleitung

Sony

Sony SCD-XB790 Bedienungsanleitung

Sony

Sony CDX-3103 Produkthandbuch

Sony

Sony CFD-V27 Bedienungsanleitung

Sony

Sony D-NE710 - ATRAC3/MP3 CD Walkman Portable Disc... Bedienungsanleitung

Sony

Sony CFD-W57 - Cd Radio Cassette-corder Bedienungsanleitung

Sony

Sony PDW-F30 Bedienungsanleitung

Sony

Sony SCD-1 - Super Audio Cd Player Bedienungsanleitung

Sony

Sony CDP-CX70ES - Es 200 Disc Cd Player Bedienungsanleitung

Sony

Sony D-NE700 Bedienungsanleitung

Sony

Sony Disman D-25 Bedienungsanleitung

Sony

Sony CDX-M800 Produkthandbuch

Sony

Sony CDP-CX70ES - Es 200 Disc Cd Player Bedienungsanleitung

Sony

Sony CDP-CX55 - 50 Disc Cd Changer Installationsanleitung

Sony

Sony Walkman D-NF421 Bedienungsanleitung

Sony

Sony MZ-R55 Bedienungsanleitung

Sony

Sony Sports D-FS18 Bedienungsanleitung

Sony

Sony CFD-S26 - Cd Radio Cassette-corder Bedienungsanleitung

Sony

Sony HCD-BX9 Bedienungsanleitung

Sony

Sony SCD-XB770 Bedienungsanleitung

Sony

Sony CDP-CE375 Bedienungsanleitung

Sony

Sony CDP-102 - Compact Disc Player Bedienungsanleitung

Sony

Sony MDP-650 Bedienungsanleitung

Beliebte CD-Player Handbücher anderer Marken

RCA

RCA RP-7923 Bedienungsanleitung

Pioneer

Pioneer DEH-P3550MP XM Bedienungsanleitung

Philips

Philips AZ1207 Bedienungsanleitung

Philips

Philips CD582 Bedienungsanleitung

Philips

Philips AZ 6821 Bedienungsanleitung

Lasonic

Lasonic MSU-2020 Bedienungsanleitung

THOMSON

THOMSON RCD150 Bedienungsanleitung

Denon

Denon DCD-1420 Bedienungsanleitung

Panasonic

Panasonic SJ-MR100 Bedienungsanleitung

Onkyo

Onkyo DX-7210 Bedienungsanleitung

Denon

Denon DVM-4800 Bedienungsanleitung

JBL

JBL MR-32 Bedienungsanleitung

RCA

RCA RCD152 Bedienungsanleitung

Technics

Technics SL-PS770A Bedienungsanleitung

Clarion

Clarion compact disc Bedienungsanleitung

Philips

Philips Expanium AZ 1538 Bedienungsanleitung

Rotel

Rotel RCD 975 Bedienungsanleitung

Pioneer

Pioneer CLD-D790 Bedienungsanleitung