Sony CDP-D12 Bedienungsanleitung
Compact Disc Player
CDP-D12
FEATURES
ony unveils the CDP-D12, a CD
player designed for professional
applications such as television and radio
broadcasting, post-production, public
addresses, and audio/visual
presentations.
he CDP-D12 offers a variety of
features that fulfill the demanding
requirements of these applications,
including multiple output interfaces, a
variety of playback functions, RS-232C or
parallel remote-control capability, and
sequential playback between multiple
CDP-D12 decks. Additionally, its shock-
resistant design contributes to the high
playback stability required by today’s
professionals. And with its rack-
mountable design, the CDP-D12 player is
only 1U high, saving rack-mount space
and contributing to useful system
portability.
Flexible Output Interfaces
The CDP-D12 is equipped with multiple output
interfaces to meet individual system needs.
XLR-type balanced and phono unbalanced
connectors are provided for analog outputs,
plus coaxial and optical digital outputs are also
available.
Variable Playback Speed
The CDP-D12 allows the playback speed to be
adjusted within the range of ±12.5% in 0.5%
steps – this enables the duration of the audio
program to be adjusted in post-production and
on-air applications. The duration of the audio
program is displayed according to the
adjustment.
Auto-Cue Function
The auto-cue function skips the silent areas at
the beginning of an audio track and puts the
deck in pause mode. Users can choose the
threshold level of the audio to skip from five
preset settings: -72 dB, -66 dB, -60 dB, -54 dB,
and -48 dB.
Front Panel
Rear Panel
S
T
Cue-Point Marking
Operators can mark a cue-point to immediately
start playback from any desired point.
Various Playback/Repeat Modes
In addition to normal playback, shuffle playback,
and program playback modes, power-on play is
also available. For each playback mode, three
repeat modes are provided: single-track repeat,
A-B repeat, and all-track repeat.
Sequential Playback
Sequential playback is available when multiple
CDP-D12 players are daisy-chained through the
‘Relay Play’ input/output interfaces. When the
first CD player reaches its playback end, a
control signal is sent to the second player to
trigger its playback automatically.
Remote Control via RS-232C and
Parallel Ports
The CDP-D12 is equipped with both RS-232C
and parallel ports, which allow remote control
of the CDP-D12 from another control system,
such as an external PC. The mixer-fader-play
command is also available through the parallel
port.
RM-DS11 Remote
Control Unit (Supplied)
The supplied remote control unit allows simple
and quick playback control of the CDP-D12
player. Both wired and infrared wireless control
is possible. The wired control capability is useful
when the CDP-D12 player is installed with other
CD players, and it provides comfort that the CD
players are operating when putting an audio
program to air.
Shock-Resistant Design
For additional reliability, the CDP-D12 player
incorporates an ESP (Electronic Shock Protection)
function. Using a buffer memory with a
capacity of 2.6 seconds, this reduces unwanted
track ‘skips’ caused by external shocks or
vibrations.
Versatile Playback
The CDP-D12 player reads audio data stored on
CD-R or CD-RW discs as well as conventional
CDs. It also accepts both 8 cm and 12 cm CDs
without an adaptor.
RM-DS11
Outputs
Analog line outputs (L/R) Phono (x 2), unbalanced, max. +8 dBu, 10 kΩload or more
XLR-3-32 (x 2), balanced, -10 dBu (max. +10 dBu)/+4 dBu (+24 dBu) selectable, 600 Ωload or more
Digital outputs (IEC60958 consumer)
Optical Square optical connector (x 1), -18 dBm, wave length:600 mm
Coaxial Phono (x 1), 0.5 Vp-p, 75 Ωload
Headphone output Phone (stereo), 0 to 10 mW, 32 Ωload
Audio Performance
Sampling frequency 44.1 kHz
Wow and flutter Less than measurement
Frequency response 20 Hz to 20 kHz ±0.5 dB
Signal-to-noise ratio 98 dB or more
Channel separation 87 dB or more (1 kHz)
Pitch control Normal speed ±12.5% in 0.5% steps
Total harmonic distortion 0.006% or less
D/A conversion 24-bit, x 128 oversampling
General
Laser Semiconductor laser (λ 780nm)
Applicable discs 8 cm/12 cm CD, CD-R,CD-RW
Power requirements AC 120V, 60 Hz (UC2)
AC 220V, 50/60 Hz (CN2)
AC 230V, 50/60 Hz (CED)
Power consumption 18W (UC2/CN2)
16W (CED)
Operating temperature 0 to +40 ˚C (+32 to +104 ˚F)
Storage temperature -20 to +60 ˚C (-4 to +140 ˚F)
Mass 4.0 kg (8 lb 13 oz)
Dimensions (W x H x D) 482 x 44 x 265 mm (19 x 1 3/4x 10 1/2inches)
Supplied accessories Remote control unit (x 1), Control-S cable (x 1), operating instructions (x 1)
0 dBu = 0.775 Vrms
SPECIFICATIONS
©2003 Sony Corporation. All rights reserved.
Reproduction in whole or in part without written permission is prohibited.
Features, design, and specifications are subject to change without notice.
All non-metric mass and measurements are approximate.
Sony is a registered trademark of Sony Corporation.
A-1106
MK10060V1TC03AUG
Printed in Japan on recycled paper
Distributed by
Andere Handbücher für CDP-D12
3
Inhaltsverzeichnis
Andere Sony CD-Player Handbücher
Sony
Sony CDX-G1051U Bedienungsanleitung
Sony
Sony MDP-800 Bedienungsanleitung
Sony
Sony CDX-1000RF Bedienungsanleitung
Sony
Sony CFD-S36 - Cd Radio Cassette-corder Bedienungsanleitung
Sony
Sony D-VJ85 Bedienungsanleitung
Sony
Sony Discman D-F411 Bedienungsanleitung
Sony
Sony Walkman D-NE1 Bedienungsanleitung
Sony
Sony CDP-XA20ES Bedienungsanleitung
Sony
Sony CDX-C9500 Bedienungsanleitung
Sony
Sony CDP-C320M Bedienungsanleitung
Sony
Sony D-NE300 - Psyc ATRAC Walkman Portable CD... Bedienungsanleitung
Sony
Sony CDX-444RF - Compact Disc Changer System Bedienungsanleitung
Sony
Sony Walkman D-F201 Bedienungsanleitung
Sony
Sony CDP-115 Bedienungsanleitung
Sony
Sony RC-BX30 Bedienungsanleitung
Sony
Sony CD Walkman D-FJ405 Bedienungsanleitung
Sony
Sony CDP-291 Bedienungsanleitung
Sony
Sony CDX-GT570 Bedienungsanleitung
Sony
Sony CDX-T70MX - Mp3 6 Disc Bedienungsanleitung
Sony
Sony CDP-X779ES Bedienungsanleitung
