Sony Trinitron KV-XF25M80 Bedienungsanleitung

• Before operating the unit, please read this manual thoroughly and retain

it for future reference.

Trinitron Color TV

KV-XF25M80

KV-XF29M80

Operating Instructions

3-866-011-11 (1)

WARNING

• Dangerously high voltages are present inside the TV.

• Operate the TV only between 110 – 240 V AC.

To prevent fire or shock hazard, do not expose

the TV to rain or moisture.

Do not operate the TV if any liquid or solid object

falls into it. Have it checked immediately by

qualified personnel only.

Do not open the cabinet or the rear cover of the

TV. Refer servicing to qualified personnel.

Do not install the TV in hot, humid or excessively

dusty places.

Do not install the TV in a confined space, such

as a bookcase or built-in cabinet.

Do not block the ventilation openings of the TV.

Do not pull the power cord to disconnect the TV.

Pull it out by the plug.

Disconnect the power cord during lightning

storms or if you are not going to use the TV for

several days.

Install the TV in a stable position. Do not allow

children to climb onto it.

Do not plug too many appliances into the same

power socket. Do not damage the power cord.

Clean the TV with a dry soft cloth.

Do not use benzine, thinner, or any other chemicals

to clean the TV. Do not scratch the picture tube.

Advanced Operations

Selecting the picture and sound

modes ..................................................11

Viewing your favorite channels —

— FAVORITE CHANNEL................12

Listening with surround sound.......13

Adjusting Your Setup (MENU)

Introducing the menu system ..........14

How to use the menu ........................15

Changing the A/V CONTROL

settings ........................................16

Changing the SET UP

settings ..........................................18

Changing the Channel Preset

(CH PRESET) settings .................21

Additional Information

Troubleshooting .................................25

Self-diagnosis function......................28

Identifying parts and controls .........29

Specifications...................... Back cover

Table of Contents

WARNING

Using Your New TV

Getting Started ............................................................................................. 4

Step 1: Connect the antenna .................................................................. 4

Step 2: Insert the batteries into the remote.......................................... 5

Step 3: Preset the channels automatically ........................................... 5

Connecting optional components ............................................................. 6

Securing the TV............................................................................................ 7

Watching the TV .......................................................................................... 8

Using Your New TV

The features you will enjoy include:

• FAVORITE CH for quick and easy channel selection (page 12)

• PICTURE MODE/SOUND MODE/SURROUND for customizing your TV (pages 11, 13)

Your TV also offers the following setup features:

• Menu language options — English/Chinese (page 9)

• CHILD LOCK for preventing children from watching certain programs (page 19)

• INTELLIGENT VOL for automatic volume adjustment (page 20)

• PIC ROTATION for picture position adjustment (page 20)

4Using Your New TV

VIDEO

VIDEO IN

VIDEO OUT

AUDIO

WOOFER

(8 )

Getting Started

Step 1

Connect the antenna

If you wish to connect a VCR, see the “Connecting a VCR” diagram below.

CAUTION

Do not connect the power cord until all other connections are complete;

otherwise, a minimal current leakage through the antenna and/or other

terminals to the ground could occur.

Using Your New TV

IEC connector

(not supplied)

To video and

audio outputs

VCR

(yellow)

-L (MONO) (white)

-R (red)

To S video

output

Antenna cable (not supplied)

To …1 or 2

(video input)

Audio/Video cable

(not supplied)

S video cable

(not supplied)

: Signal flow

(S video input)

To antenna

output

To ˘

(antenna)

: Signal flow

Antenna cable (not supplied)

Rear of TV

Connecting a VCR

To play a video tape, see page 9.

Using Your New TV

AUTO

PROGR

ONE-PUSH AUTOMATIC PROGRAMMING

ONE-PUSHAUTOMATIC PROGRAMMING

PROGR

Notes

• If you connect a monaural VCR, connect the yellow plug to (the yellow

jack) and the black plug to -L (MONO) (the white jack).

• If you connect a VCR to the ˘(antenna) terminal, preset the signal

output from the VCR to the program number 0 on the TV.

• When both the (S video input) and …1 (video input) are connected,

the (S video input) is automatically selected. To view the video input

to …1 (video input), disconnect the S video cable.

• When no signal is input to the connected video equipment, the TV screen

becomes blue.

Step 2

Insert the batteries

into the remote

Note

• Do not use old batteries or different types of batteries together.

Step 3

Preset the channels automatically

Tip

• To stop the automatic channel presetting, press MENU twice.

Now You Are Ready. . .

To preset the channels manually, see

page 21.

Front of TV

6Using Your New TV

WOOFER

(8 )

(MONO)

Connecting optional components

You can connect optional audio/video components, such as a VCR, multi disc player,

camcorder, video game or stereo system.

To watch the picture of the connected equipment, see page 9.

Connecting a camcorder/video game equipment

using the …(video input) jacks

Notes

• You can also connect video equipment to the …1 or 2 (video input) jacks

at the rear of your TV.

• When both the (S video input) and …3 (video input) are connected,

the (S video input) is automatically selected. To view the video input

to …3 (video input), disconnect the S video cable.

Connecting audio/video equipment using the Ú

(monitor output) jacks

Note

• When connecting a monaural VCR, connect the yellow plug to (the

yellow jack) and the black plug to -L (MONO) (the white jack).

To S video output

Front of TV

Camcorder

Video game

equipment

To video and

audio outputs

(yellow)

-L (MONO)

(white)

-R (red)

Rear of TV

antenna

output

To video and

audio inputs

Audio system

audio

inputs

VCR

:Signal flow

(S video

input) To…3

(video input)

To Ú

(monitor

output)

Audio/Video cable (not supplied)

S video cable (not supplied)

Antenna cable (not supplied)

Audio/Video cable

(not supplied)

Using Your New TV

Securing the TV

To prevent the TV from falling, secure the TV using one of the following methods:

AWith the supplied screws, attach the stabilizer band to the TV stand and to

the rear of the TV using the provided hole.

BPass a cord or chain through the clamps and secure them to the rear of the

TV and a wall or pillar.

Note

• Use only the supplied screws. Use of other screws may damage the TV.

3.8mm

8Using Your New TV

Watching the TV

This section explains functions used

while watching TV. Most operations can

be done using the remote.

1Press Uto turn on the TV.

When the TV is in standby

mode (the uindicator on

the TV is lit red), press u

on the remote.

2Press PROGR +/– or

number buttons to select

the TV program.

For double digit numbers,

press ÷, then the number

(e.g., for 25, press ÷, then

2 and 5).

3Press

.+/– to adjust the

volume.

…

;

Number buttons

JUMP

.+/–

PROGR +/–

123

456

-/--

FAVORITE

SOUND

MODE

PIC MODE

ENTER

A/B

SURROUND



+/–/ENTER

u(stanby) indicator

Using Your New TV

ENTER



Turn off temporarily

Turn off completely

Mute the sound

Watch the video input

(VCR, camcorder, etc.)

Jump back to the previous channel

Display the on-screen information*

Press

u. The

indicator on the TV lights up red.

Uon the TV.

¤.

…(or …on the TV) to select “VIDEO 1”, “VIDEO

2” and “VIDEO 3.”

To return to the TV program, press ;.

JUMP.

* The picture, sound, and either the program number or video mode are

displayed. The on-screen display for the picture and sound information

disappears after about 3 seconds.

Changing the menu language

You can change the menu language as well as the on-screen language.

For details on how to use the menu, see “How to use the menu” on page 15.

Additional tasks

1Press MENU.

2Press + or – to select the

SET UP icon ( ), then

press ENTER.

Make sure LANGUAGE/

is selected (highlighted),

then press ENTER.

4Press + or – to select ,

then press ENTER.

The menu language

changes to Chinese.

To return to the normal screen

Press MENU.

ENTER



continued

Chinese OSD

10 Using Your New TV

Setting the Wake Up timer

1Press until the

desired period of time

appears.

2Select the TV program or

video mode you want to

wake up to.

3Press uor set the Sleep

timer if you want the TV

to turn off automatically.

The indicator on the TV

lights up orange.

To cancel the Wake Up timer

Press until “WAKE UP TIMER: OFF” appears, or turn off the

TV’s main power.

Notes

• The Wake Up timer starts immediately after the on-screen display

disappears.

• If no buttons or controls are pressed for more than two hours after the TV

is turned on using the Wake Up timer, the TV automatically goes into

standby mode. To resume watching the TV, press any button or control on

the TV or the remote.

Setting the Sleep timer

Press until the

desired period of time

appears.

To cancel the Sleep timer

Press until “SLEEP TIMER: OFF” appears, or turn the TV off.

WAKE UP TIMER:10M

WAKE UP TIMER:OFF WAKE UP TIMER:12H00M

After 10 minutes

No Wake Up Timer After 12 hours

SLEEP TIMER:30M SLEEP TIMER:60M

SLEEP TIMER:OFF SLEEP TIMER:90M

After 30 minutes

No Sleep Timer

After 60 minutes

After 90 minutes

Watching the TV (continued)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sony Röhrenfernseher Handbücher

Sony

Sony Trinitron KV-2199XDK Bedienungsanleitung

Sony

Sony KV-28LS60B Bedienungsanleitung

Sony

Sony Trinitron KV-29FX201D Bedienungsanleitung

Sony

Sony KD-32NS100B Installationsanleitung

Sony

Sony KV-EF34 Bedienungsanleitung

Sony

Sony TRINITRON KV-32FV27 Bedienungsanleitung

Sony

Sony TRINITRON KV-13FM 12 Bedienungsanleitung

Sony

Sony KV-14CT1U Bedienungsanleitung

Sony

Sony WEGA KV-28FQ86U Bedienungsanleitung

Sony

Sony WEGA KV 27FS320 Bedienungsanleitung

Sony

Sony KV-14LM1K Bedienungsanleitung

Sony

Sony Trinitron KV-29XL71K Bedienungsanleitung

Sony

Sony KV-25RE10K Bedienungsanleitung

Sony

Sony KV-27TR21 Bedienungsanleitung

Sony

Sony FD Trinitron WEGA KV-36FS12 Benutzerhandbuch

Sony

Sony Trinitron KV-29LS40K Bedienungsanleitung

Sony

Sony KV-14CT1U Bedienungsanleitung

Sony

Sony KV-36FS320 - 36" Fd Trinitron Wega Bedienungsanleitung

Sony

Sony FD Trinitron WEGA KV-36FS12 Bedienungsanleitung

Sony

Sony KV-SR29 Bedienungsanleitung

Sony

Sony KV-32LS65AUS Bedienungsanleitung

Sony

Sony Trinitron KV-27S42 Bedienungsanleitung

Sony

Sony TRINITRON KV-32FV27 Bedienungsanleitung

Sony

Sony KV-21FT1U Bedienungsanleitung

Beliebte Röhrenfernseher Handbücher anderer Marken

JVC

JVC AV-21QS5SP Bedienungsanleitung

Philips

Philips COLOR TV 25 INCH TABLE TR2517C Bedienungsanleitung

Hitachi

Hitachi 27CX01B Bedienungsanleitung

LG 30FZ1DC Bedienungsanleitung

RCA

RCA F19442 Bedienungsanleitung

Samsung

Samsung CS761 Bedienungsanleitung

Philips

Philips 29PT4973 Bedienungsanleitung

Panasonic

Panasonic TC-29P100 Series Bedienungsanleitung

RCA

RCA F19422 Bedienungsanleitung

Samsung

Samsung SlimFit TX R3079WH Bedienungsanleitung

Palsonic

Palsonic MODEL 5179G Bedienungsanleitung

Toshiba

Toshiba CF13H22 Bedienungsanleitung

Magnavox

Magnavox MS3650C - 36" Smart Ctv Handbuch

Toshiba

Toshiba 14AF41 Bedienungsanleitung

Philips

Philips 21PT9469 Bedienungsanleitung

Mitsubishi

Mitsubishi CS-35305 Bedienungsanleitung

Hitachi

Hitachi 35UX60B, 35TX10B Bedienungsanleitung

Toshiba

Toshiba 27A34 - 27" CRT TV Bedienungsanleitung