Sony WEGA KV-AR252 Bedienungsanleitung

KV-AR292

KV-AR252

4-099-607-11 (1)

M81

Trinitron Color TV

Mode d’emploi

• Avant de faire fonctionner cet appareil, lisez attentivement le présent

mode d’ emploi et conservez-le pour toute référence ultérieure.

 

•    ,              

 

•  ,          

Operating Instructions

• Before operating the unit, please read this manual thoroughly and retain

it for future reference.

Do not place any objects on the TV. The apparatus

shall not be exposed to dripping or splashing and

that no objects filled with liquids, such as vases,

shall be placed on the apparatus.

WARNING

• Dangerously high voltages are present inside the TV.

• TV operating voltage: 110 – 240 V AC.

• Do not plug in the power cord until you have completed making all other

connections; otherwise a minimum leakage current might flow through the antenna

and other terminals to ground.

• To avoid battery leakage and damage to the remote, remove the batteries from the

remote if you are not going to use it for several days. If any liquid leaks from the

batteries and touches your skin, immediately wash it away with water.

Do not open the cabinet and the rear cover of the

TV as high voltages and other hazards are present

inside the TV. Refer servicing and disposal of the

TV to qualified personnel.

Your TV is recommended for home use only.

Do not use the TV in any vehicle or where it may be

subject to excessive dust, heat, moisture or

vibrations.

Do not operate the TV if any liquid or solid object

falls into it. Have it checked immediately by

qualified personnel only.

Do not block the ventilation openings of the TV.

Do not install the TV in a confined space, such as a

bookcase or built-in cabinet.

For children’s safety, do not leave children alone

with the TV. Do not allow children to climb onto it.

Clean the TV with a dry and soft cloth.

Do not use benzine, thinner, or any other chemicals

to clean the TV. Do not attach anything (e.g.,

adhesive tape, cellophane tape, glue) on the painted

cabinet of the TV. Do not scratch the picture tube.

For your own safety, do not touch any part of the

TV, the power cord and the antenna cable during

lightning storms.

Install the TV on a stable TV stand and floor which

can support the TV set weight. Ensure that the TV

stand surface is flat and its area is larger than the

bottom area of the TV.

Do not plug in too many appliances to the same

power socket. Do not damage the power cord.

Pull the power cord out by the plug. Do not pull

the power cord itself. Even if your TV is turned

off, it is still connected to the AC power source

(mains) as long as the power cord is plugged in.

Unplug the TV before moving it or if you are not

going to use it for several days.

To prevent fire or shock hazard, do not expose the

TV to rain or moisture.

xSecuring the TV

To prevent the TV from falling, use the supplied screws, clamps and band to

secure the TV.

20 mm

3.8 mm

screws clamps band

Screw the band to the TV stand and to the

provided hole at the rear of your TV.

(1) Put a cord or chain through the clamps.

(2) Screw one clamp to a wall or pillar and

the other clamp to the provided hole at

the rear of your TV.

(1) Attach each end of a cord or chain to

the provided holders at the rear of

your TV.

(2) Securely fix the attached cord or chain

to a wall or pillar using an attachment

which can support the TV set weight.

Note

• Use only the supplied screws. Use of other screws may damage the TV.

Table of Contents

Installation

Getting Started ..................................... 6

Setting up your TV

(“Initial Setup”) .................................... 7

Overview of Controls

TV front and rear panels ..................... 8

Using the remote control and

basic functions ...................................... 9

Advanced Operations

Selecting the picture and sound

modes .................................................. 11

Viewing Teletext ................................. 12

Menu Adjustment

Introducing the menu system .......... 13

Changing the “Picture” setting ........ 16

Changing the “Sound” setting ......... 18

Changing the “Timer” setting .......... 20

Changing the “Channel Setup”

setting .................................................. 21

Changing the “Setup” setting .......... 23

Additional Information

Connecting optional components ... 24

Troubleshooting ................................. 26

Specifications ...................... Back cover

6Installation

Installation

xGetting Started

Step 1

Insert the batteries (supplied) into the remote.

Note

• Do not use old or different types of batteries together.

Step 2

Step 3

Step 4

Set up the TV by following the instructions of the

“Initial Setup” menu (see page 7).

Plug in the power cord, then press !on the TV to

turn it on.

Note

• The 1(standby) indicator flashes green for a few seconds

when turning on the TV. This does not indicate a

malfunction.

Connect the antenna cable (not supplied) to 8

(antenna input) at the rear of the TV.

Tip

• You can also connect your TV to other optional components

(see page 24).

Installation

Setting up your TV

(“Initial Setup”)

When you turn on your TV for the first time, the “Initial Setup” menu will appear.

You may change the menu language, preset the TV channels automatically and adjust

the picture position using the buttons on the TV front panel.

Tip

• The MENU, and V/v/B/b buttons on the remote control can also be used for the

operations below.

1Press 2+/– to select the desired menu

language, then press t.

The selected menu language appears.

2Press 2+/– to select “Yes”, then press t

to preset the channels automatically or

select “No” to skip automatic channel

presetting.

Once you select “Yes”, your TV will start

searching for all the available channels.

If the message “No channel found. Please

connect cable/antenna.” appears, check your

TV connections, then press t.

3Press 2+/– to adjust the bars on the top

and bottom of the menu if they are

slanted, then press t.

If no adjustment is necessary, then press

4Press 2+/– to select “No”, then press t.

This menu will not appear again the next

time you turn on the TV by pressing !.

To allow this menu to appear again, select

“Yes”, then press t.

Tips

• You can immediately go to the end of the ”Initial Setup” menu by pressing MENU.

• You can also set up your TV using the menu system (see page 13).

• You can also preset the channels automatically by pressing MENU (AUTO PROG) button on

the TV front panel for about five seconds.

Start auto program now?

8Overview of Controls

Overview of Controls

L(MONO) R

PROGRMENU AUTO

PROGR

ENTER SELECT

L(MONO) R

123

RLY

qf qd

PROG

(AUTO PROG)

SOUND

MODE

58 76

AUTO PROG:Press [MENU] for 5sec

TV front panel

TV rear panel

xTV front and rear panels

Button/Terminal Function Page

1!Turn off or turn on the TV. 6

21Standby indicator. 6

2Wake Up indicator. 20

3Remote control sensor. –

4PROG +/– Select program number. –

52+/– Adjust volume. –

6tSelect TV or video input. 24

Menu operations

52+/– Select and adjust items. –

6tConfirm selected items. –

7MENU Display or cancel the menu. –

7(AUTO PROG) Preset channels automatically. 7

8SOUND MODE Select sound mode options. 11

5-Band Graphic Equalizer display will appear.

9t4 Video input terminal 4. 24

0iHeadphone jack. –

qa Component video input terminal. 25

qs 8Antenna input terminal. 24

qd TMonitor output terminal. 24

qf t1, t2, t3 Video input terminal 1, 2, 3. 24

Overview of Controls

xUsing the remote control and basic

functions

continue

123

789

DVD

SOUND

PIP PROG

RESET

PROG

Button Description Page

1?/1 Turn off temporarily or turn on the TV. –

3aDisplay the TV program. –

4tSelect TV or video input. 24

0Change the picture size: –

“On” (16:9 wide-mode), “Off”.

qs Jump to last program number that has been –

watched for at least five seconds.

qd PROG +/– Select program number. –

qh Mute the sound. –

Display on-screen information. –

qk DVD

Select component video input. 25

wd Select surround mode options:

“TruSurround” (surround sound that spreads out –

to the rear of a room), “WOW” (full, deep bass

sound), “Simulated” (stereo-like monaural sound),

“Off”.

10 Overview of Controls

continued

WOW, TruSurround, SRS and symbol are trademarks of SRS Labs, Inc. WOW

and TruSurround technologies are incorporated under license from SRS Labs, Inc.

Licensed by BBE Sound, Inc. under USP4638258, 4482866.

“BBE” and BBE symbol are trademarks of BBE Sound, Inc.

Button Description Page

wf Select sound mode options. 11

5-Band Graphic Equalizer display will appear.

wg Select picture mode options. 11

wh 0 – 9, -Input numbers. –

wj 2+/– Adjust volume. –

wk RESET Set TV to factory setting. 26

Menu operations

7MENU Display or cancel the menu. 15

wa Confirm selected items. 15

ws V, v, B, b Select and adjust items. 15

Timer operations

qf Set TV to turn off automatically. –

qg Set TV to turn on automatically. –

Teletext operations (green label)

2Enlarge the Teletext display. 12

4Stop Teletext from scrolling. 12

9Display Teletext broadcast. 12

qa z(red, green, Access a FASTEXT menu. 12

yellow, blue)

qd , Display the next or previous page. 12

qf Show TV screen while waiting for Teletext page. 12

qg Display Teletext service contents. 12

qj Reveal concealed information. 12

Stereo/bilingual operations

2A/B Not function for your TV –

PIP operations (yellow label)

8PIP PROG +/

PIP PROG – Not function for your TV –

w; SOUND

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Sony Röhrenfernseher Handbücher

Sony

Sony Wega Trinitron KV-27FV17 Benutzerhandbuch

Sony

Sony WEGA KV-32HQ150K Bedienungsanleitung

Sony

Sony KV-28FS20U Bedienungsanleitung

Sony

Sony TRINITRON KV-13FM 12 Bedienungsanleitung

Sony

Sony Trinitron KV-28DS60U Bedienungsanleitung

Sony

Sony KV-32FQ80U Bedienungsanleitung

Sony

Sony KV-21CL10U Bedienungsanleitung

Sony

Sony Trinitron KD-32NX200U Bedienungsanleitung

Sony

Sony FD Trinitron KV-32LS35B Bedienungsanleitung

Sony

Sony KV-14CT1U Bedienungsanleitung

Sony

Sony KD-34XBR970 - 34" Hdtv 16x9 Format Bedienungsanleitung

Sony

Sony KV-14CT1K Bedienungsanleitung

Sony

Sony KV-21FT1B Bedienungsanleitung

Sony

Sony KV-14LT1K Bedienungsanleitung

Sony

Sony WEGA KV-36FS120 Bedienungsanleitung

Sony

Sony FD Trinitron KV-32FQ70K Bedienungsanleitung

Sony

Sony KD-32DX150U Bedienungsanleitung

Sony

Sony Trinitron KV-27S42 Bedienungsanleitung

Sony

Sony FD Trinitron KV-28FQ70B Bedienungsanleitung

Sony

Sony KV-14CT1U Bedienungsanleitung

Sony

Sony KV-36FS70K Bedienungsanleitung

Sony

Sony Trinitron KV-29CS60K Bedienungsanleitung

Sony

Sony WEGA KV 20FV12 Bedienungsanleitung

Sony

Sony KV-36XBR800 - 36" Trinitron Color Flat Tv Wega... Bedienungsanleitung

Beliebte Röhrenfernseher Handbücher anderer Marken

JVC

JVC AV-21QS5SP Bedienungsanleitung

Philips

Philips COLOR TV 25 INCH TABLE TR2517C Bedienungsanleitung

Hitachi

Hitachi 27CX01B Bedienungsanleitung

LG 30FZ1DC Bedienungsanleitung

RCA

RCA F19442 Bedienungsanleitung

Samsung

Samsung CS761 Bedienungsanleitung

Philips

Philips 29PT4973 Bedienungsanleitung

Panasonic

Panasonic TC-29P100 Series Bedienungsanleitung

RCA

RCA F19422 Bedienungsanleitung

Samsung

Samsung SlimFit TX R3079WH Bedienungsanleitung

Palsonic

Palsonic MODEL 5179G Bedienungsanleitung

Toshiba

Toshiba CF13H22 Bedienungsanleitung

Magnavox

Magnavox MS3650C - 36" Smart Ctv Handbuch

Toshiba

Toshiba 14AF41 Bedienungsanleitung

Philips

Philips 21PT9469 Bedienungsanleitung

Mitsubishi

Mitsubishi CS-35305 Bedienungsanleitung

Hitachi

Hitachi 35UX60B, 35TX10B Bedienungsanleitung

Toshiba

Toshiba 27A34 - 27" CRT TV Bedienungsanleitung