Sony MDR-IF240RK - Headphones - Binaural Bedienungsanleitung

Cordless Stereo

Headphone

System

Operating Instructions

3-248-361-72(1)

MDR-IF240RK

2GB

WARNING

To prevent fire or shock hazard,

do not expose the unit to rain

or moisture.

To prevent fire or shock hazard, do not

place objects filled with liquids, such as

vases, on the apparatus.

To avoid electrical shock, do not open

the cabinet. Refer servicing to qualified

personnel only.

Do not install the appliance in a

confined space, such as a bookcase or

built-in cabinet.

The validity of the CE marking is

restricted to only those countries where

it is legally enforced, mainly in the

countries EEA (European Economic

Area).

3GB

Welcome!

Thank you for purchasing the Sony

MDR-IF240RK Cordless Stereo

Headphone System. Before operating

the unit, please read this manual

thoroughly and retain it for future

reference.

The MDR-IF240RK is a cordless stereo

headphone system using infrared

transmission. You can enjoy listening to

a programme free from the restriction

of the headphones cord by simply

connecting the transmitter to a TV, or

audio components equipped with a

headphones jack or a line output jack.

•Cordless, noiseless infrared headphone

system resistant to external noise, etc.

•Easy rechargeable battery system

automatically charges the headphones

when placed on the transmitter.

•Wide infrared reception range of up to 7 m

(23 ft.).

•Self-adjusting headband mechanism

eliminating the need for headband

adjustment.

•Single VOL control adjusts both the right

and left volume of the headphones.

•Either rechargeable nickel-metal hydride

battery (supplied) or commercially

available (size AAA) dry battery can be

used to power the headphones.

Table of contents

Getting started

Unpacking ........................................... 4

Charging the supplied rechargeable

battery .............................................. 5

Setting up the transmitter ................. 8

Operating the system

Listening to a programme .............. 10

The effective area of the

transmitter ..................................... 12

Replacing the ear pads .................... 12

Additional information

Specifications .................................... 13

Precautions ....................................... 14

Troubleshooting ............................... 14 GB

Getting started

4GB

NGetting started

Unpacking

Check that you have the following

items before using the headphones:

• The transmitter TMR-IF240R (1)

• AC power adaptor (1)

• Connecting cord (1)

(phono plugs h stereo mini plug)

• Unimatch plug adaptor (1)

(stereo mini jack h stereo phone

plug)

• Rechargeable nickel-metal hydride

battery (1)

• The headphones MDR-IF240R (1)

Getting started 5GB

Charging the

supplied

rechargeable

battery

The supplied rechargeable nickel-metal

hydride battery is not charged from the

first time you use it. Be sure to charge

them before use.

To charge the headphones, place them

on the transmitter.

1Open the battery compartment

lid of the left housing.

2Insert the supplied rechargeable

nickel-metal hydride battery

into the battery compartment

matching 3terminal on the

battery to 3in the

compartment.

Do not use rechargeable battery

other than the supplied one.

3Close the battery compartment

lid.

4If your AC power adaptor is

equipped with a voltage

selector, set it to the operating

voltage in your area with a

screw driver before connecting

the AC power adaptor to an AC

outlet.

(Continued)

Getting started

6GB

5Connect the supplied AC power

adaptor to the transmitter.

6Rest the headphones on the

transmitter so that the

headphones’ contact point

meets the transmitter’s contact

pin while making sure that the

charging indicator lights up.

The charging is completed in about

16 hours and the charging indicator

goes off.

When the indicator is not lit

Check if the right and left headphones

are rested on the transmitter correctly.

The indicator may not be lit if the

headphones’ contact point does not

meet the transmitter’s contact pin. Take

off the headphones and place them on

the transmitter again so that the

indicator lights up.

To recharge the headphones

battery after use

Place the headphones on the transmitter

after you use the headphones. Since the

built-in timer recognizes when

charging is complete, there is no need to

take off the headphones from the

transmitter after the completion of

charging.

Notes

•The transmitter automatically turns off

while charging the battery.

•This system is designed to charge only the

supplied rechargeable battery type

BP-HP550 for safety. Note that other types

of rechargeable battery cannot be charged

with this system.

•If a dry battery is installed, they cannot be

charged.

•Do not attempt to use the supplied BP-

HP550 rechargeable battery for other

components. They are for use with this

system only.

•Charge in an environmental temperature of

between 0˚C and 40˚C (between 32 ˚F and

104˚F).

Charging and usage hours

*1at 1 kHz, 1 mW +1 mW output

*2hours required to fully charge empty

battery

*3Time stated above may vary, depending

on the temperature or conditions of use.

AC power

adaptor

(supplied)

Transmitter

to DC IN 9V jack

to an AC outlet

Approx.

charging hours

1 hour

16 hours*2

Approx. usage

time*1

1 hour and 45

minutes*3

35 hours*3

Right

housing

Left housing

Contact

point

Contact

Getting started 7GB

When the remaining battery

power becomes weak

When the rechargeable battery becomes

weak, the power indicator light dims.

Recharge the battery as soon as

possible.

Note

The rechargeable nickel-metal hydride

battery should be replaced with new one

when they last only half the expected time

after a proper recharging. The rechargeable

battery type BP-HP550 is not commercially

available. You can order the battery from the

store where you purchased this system, or at

your nearest Sony dealer.

Using the headphones with dry

battery (sold separately)

Commercially available (size AAA) dry

batteries can also be used to power the

headphones. Install the battery in the

same manner as described in steps 1

through 3 of “Charging the supplied

rechargeable battery”.

When dry battery is installed, the

battery charge function is not

activated.

Battery life

*1at 1 kHz, 1 mW+1 mW output

*2Time stated above may vary, depending

on the temperature or conditions of use.

Battery

Sony alkaline battery

LR03/AM-4(N)

Sony manganese

battery R03/UM-4

(NU)

Approx. hours*1

60 hours*2

28 hours*2

Notes on Batteries

•Do not charge a dry battery.

•Do not carry a dry battery together

with coins or other metallic objects. It

can generate heat if the positive and

negative terminals of the battery are

accidentally come into contact with

metallic objects.

•When you are not going to use the

unit for a long time, remove the

battery to avoid damage from battery

leakage or corrosion.

Getting started

8GB

Setting up the

transmitter

The transmitter is equipped with two

input jacks, which allows for connection

to the specified output jacks: PHONES

IN to the headphones jack, and LINE IN

to the LINE OUT jacks of your

connected equipment.

1Connect the transmitter to an

audio/video component.

Select method Aor B, according

to the output jack type of the AV

component you use.

*WALKMAN is a registered trademark of

Sony Corporation.

Transmitter

Unimatch plug

adaptor (supplied)

WALKMAN*, TV,

VCR, etc.

AWhen connecting to a

headphones jack

Connect to the PHONES IN jack on

the transmitter.

Connecting cord

(supplied)

Right channel (red)

to headphones jack

(stereo mini jack)

to headphones jack

(stereo phone jack)

to PHONES IN jacks

Left channel (white)

Getting started 9GB

Note

If your AV component has a stereo mini jack

(LINE OUT), connect the stereo mini jack to

LINE IN jack of the transmitter by using the

connecting cord RK-G136 sold separately. If

you connect LINE OUT jack of your AV

component to PHONES IN jack of the

transmitter, volume may be too low.

Transmitter

to LINE IN jack

Right channel

(red)

Left channel

(white)

to any jacks

other than

headphones jack

Connecting cord

(supplied)

Stereo, TV, VCR, etc.

BWhen connecting to any jacks

other than the headphones jack

Connect to the LINE IN jacks on the

transmitter.

to DC IN 9 V jack

Transmitter to an AC

outlet

2If your AC power adaptor is

equipped with a voltage

selector, set it to the operating

voltage in your area with a

screw driver before connecting

the AC power adaptor to an AC

outlet.

3Connect the supplied AC power

adaptor to the transmitter.

(Continued)

AC power

adaptor

(supplied)

Operating the system

10GB

NOperating the system

Listening to a

programme

Before listening

To prevent your ears from being

damaged, first lower the volume.

1Turn on the audio/video

component connected to the

transmitter.

When the audio signal is input, the

transmitter turns on automatically

and the infrared emitters glow but

they do not glow while the

transmitter is charging the battery.

If the transmitter is connected to the

headphones jack, set the volume

control of the audio source

component as high as possible but

not so high that the audio signal

becomes distorted.

2Turn on the headphones.

The power indicator on the upper

part of the right housing glows red.

3Put on the headphones.

Be sure to put the right housing (R)

on your right ear and the left

housing (L) on your left ear.

Notes

•Do not connect to the PHONES IN jack and

LINE IN jack at the same time. If you

connect two audio/video components to

both jacks at the same time, both of the

audio signals may result in mixed output.

•Use only the supplied AC power adaptor.

Do not use any AC power adaptor.

•When you connect the connecting cord

directly to a headphones jack (monaural

mini jack), the audio signal may not be

output through the right channel. In such a

case, use the separately sold PC-236MS

plug adaptor (stereo mini jack h

monaural mini plug) between the

connecting cord and the headphones jack.

Unified

polarity plug

Andere Handbücher für MDR-IF240RK - Headphones - Binaural

Inhaltsverzeichnis

Sprachen:

Andere Sony Kopfhörer Handbücher

Sony

Sony MDR-RF975R Bedienungsanleitung

Sony

Sony MDR-IF4000 Bedienungsanleitung

Sony

Sony MDR-XB60EX Bedienungsanleitung

Sony

Sony MDR-E9LP/GRN Bedienungsanleitung

Sony

Sony MDR-XB510AS Bedienungsanleitung

Sony

Sony MDR-RF995RK Bedienungsanleitung

Sony

Sony Qlasp MDR-PQ4/PNK Bedienungsanleitung

Sony

Sony DR-EX12iP/BLK Bedienungsanleitung

Sony

Sony XBA-NC85D Bedienungsanleitung

Sony

Sony DR-BTN200 Referenzhandbuch

Sony

Sony XBA-C10iP Bedienungsanleitung

Sony

Sony MDR-NC13 Bedienungsanleitung

Sony

Sony MDR-710LP Benutzerhandbuch

Sony

Sony MDR-NC300D Bedienungsanleitung

Sony

Sony XBA-1 Bedienungsanleitung

Sony

Sony MDR-EX40LP/VLT Bedienungsanleitung

Sony

Sony MDR-EX10LP/WHI Bedienungsanleitung

Sony

Sony Walkman SRF-H3 Bedienungsanleitung

Sony

Sony MDR-RF875RK Bedienungsanleitung

Sony

Sony MDR IF130K Bedienungsanleitung

Sony

Sony MDR-V55/WHI Bedienungsanleitung

Sony

Sony XBA-N3AP Bedienungsanleitung

Sony

Sony DR-EX14VP Installationsanleitung

Sony

Sony MDR SA3000 Bedienungsanleitung

Beliebte Kopfhörer Handbücher anderer Marken

AUSounds

AUSounds AU-Stream Bedienungsanleitung

ENERGY SISTEM

ENERGY SISTEM Style 7 Bedienungsanleitung

Philips

Philips SHE3622 Bedienungsanleitung

Insignia

Insignia NS-CAHBTSPORT Bedienungsanleitung

Movie Vision

Movie Vision HP-400 Bedienungsanleitung

MobiFren

MobiFren SM Pro Bedienungsanleitung

Motorola solutions

Motorola solutions PMLN8120 Bedienungsanleitung

Jaybird

Jaybird freedom Installationsanleitung

HiFuture

HiFuture Tidy Buds Pro Bedienungsanleitung

Creative

Creative CB2530 Bedienungsanleitung

Renkforce

Renkforce RF FTVK-100 Bedienungsanleitung

Philips

Philips SHQ3000 Bedienungsanleitung

Sennheiser

Sennheiser 500371 Bedienungsanleitung

Califone

Califone 2924AV Bedienungsanleitung

Philips

Philips EARGEAR HE205 Series Bedienungsanleitung

Technics

Technics EAH-AZ80 Bedienungsanleitung

Bose

Bose On-Ear Headphone Gebrauchs- und Wartungshandbuch

Aluratek

Aluratek ABH02F Bedienungsanleitung