Sony MDR-RF5000K Bedienungsanleitung
GB
FR
ES
Wireless Stereo
Headphone
System
© 2006 Sony Corporation
Operating Instructions
Mode d’emploi
Manual de instrucciones
2-650-249-23(1)
MDR-RF5000K
2GB
WARNING
To reduce the risk of fire or
electric shock, do not expose
this apparatus to rain or
moisture.
To reduce the risk of fire or electric
shock, do not place objects filled with
liquids, such as vases, on the apparatus.
To avoid electrical shock, do not open
the cabinet. Refer servicing to qualified
personnel only.
Do not install the appliance in a
confined space, such as a bookcase or
built-in cabinet.
Hereby, Sony Corp., declares that this
equipment is in compliance with the
essential requirements and other
relevant provisions of Directive 1999/5/
EC.
For details, please access the following
URL : http://www.compliance.sony.de/
This product is intended to be used in
the following countries.
CEK version: United Kingdom
CED version: Germany, Sweden,
Denmark, Finland,
Norway, Belgium,
Switzerland, Austria,
Netherlands, France,
Portugal, Italy, Spain,
Luxembourg
To check for version, please refer to the
barcode label located on the top of the
box.
Disposal of Old Electrical
& Electronic Equipment
(Applicable in the
European Union and
other European
countries with separate
collection systems)
This symbol on the product or on its
packaging indicates that this product
shall not be treated as household waste.
Instead it shall be handed over to the
applicable collection point for the
recycling of electrical and electronic
equipment. By ensuring this product is
disposed of correctly, you will help
prevent potential negative consequences
for the environment and human health,
which could otherwise be caused by
inappropriate waste handling of this
product. The recycling of materials will
help to conserve natural resources. For
more detailed information about
recycling of this product, please contact
your local Civic Office, your household
waste disposal service or the shop where
you purchased the product.
This product shall exclusively be used
inside buildings. Any outdoor use of this
product is prohibited on the French
territory (including French overseas
departments).
3GB
GB
Table Of Contents
Main Features .............................. 4
Checking the Components and
Accessories ................................ 5
Location and Function of Parts ... 6
Front Panel of the Transmitter .......... 6
Rear Panel of the Transmitter ............ 7
Headphone Part Descriptions ........... 8
Charging the Supplied
Rechargeable Nickel-metal
Hydride battery ........................ 9
Inserting the supplied rechargeable
nickel-metal hydride battery ......... 9
Charging ............................................. 10
Checking the battery power ............ 12
Using the headphones with alkaline
batteries (sold separately) ............ 13
Connecting the Headphone
System ..................................... 14
Connecting the transmitter to
analogue components................... 14
Connecting the transmitter to
digital components ....................... 15
Listening to a Connected
Component ............................. 17
Using Additional Headphones.. 21
Replacing the Ear Pads .............. 22
Troubleshooting......................... 23
Precautions ................................. 27
Specifications ............................. 28
4GB
Main Features
The MDR-RF5000K is a wireless stereo headphone system using 2.4 GHz wireless
digital transmission*1.
• The MDR-RF5000K is a wireless headphone system using 2.4 GHz wireless digital
transmission.
•Wireless transmission means you can use these headphones anywhere indoors
without worrying about things getting in the way. (Range: Up to approx. 30 m)*2
• Battery is automatically charged by placing the headphones on the transmitter.
•Self-adjusting mechanism headband eliminating the need for adjustment.
•The number of dedicated headphones (MDR-RF5000, sold separately) can be
increased to let more people listen in to the same sound.
*1“SYNIC Intelligent Wireless” is a trademark of Syncomm Technology Corp. to represent
uncompressed digital radio frequency transmission technology. This technology employs a
radio frequency carrier, by which audio signals are transmitted with minimum delay and high
fidelity.
*2Transmission distance varies depending on conditions of use.
Preparation 5GB
Checking the Components and Accessories
Before setting up the system, check that all of the components are included.
Wireless stereo headphones MDR-RF5000 (1)Transmitter TMR-RF5000 (1)
1Preparation
AC power adaptor (1) Rechargeable nickel-metal hydride battery
BP-HP2000 (1)
Connecting cable
(stereo mini plug ypin plug ×2), 1 m (1)
Unimatch plug adaptor (stereo mini jack y
stereo phone plug) (1)
Preparation
6GB
Front Panel of the Transmitter
CHG RF
4
1
23
L
A
T
I
G
I
D
G
O
L
A
N
A
T
C
E
L
E
S
T
U
P
N
I
5
Location and Function of Parts
1Contact pin
2Charging lever
3INPUT SELECT switch
Slide to select the input source
(DIGITAL/ANALOG).
4CHG indicator
Lights red while charging.
5RF indicator
Lights blue while emitting RF signals.
Preparation 7GB
Rear Panel of the Transmitter
AT T
TUNE/ID SET
LLINE IN
DIGITAL IN DIGITAL OUT
(THROUGH)
R
0dB -8dB
DC IN 9V
12 3 456
1TUNE/ID SET button
(See pages 19 and 21 for details.)
Use this button when reception
deteriorates, or when using additional
headphones.
2ATT (attenuator) switch
Set this switch to “0 dB” if the volume is
too low for analogue input. Normally, this
switch should be set to “–8 dB.”
3LINE IN jacks
(See page 14 for details.)
Connect the audio output jacks on an
audio or video component (sold
separately), such as a video cassette
player or TV, to these jacks.
4DIGITAL IN jack
(See page 15 for details.)
Connect a DVD device, digital satellite/
TV receiver, or other digital component
(sold separately) to this jack.
5DIGITAL OUT jack
(See page 15 for details.)
Connected components' digital signal
integrity retained when installed.
6DC IN 9V jack
Connect the supplied AC power adaptor
to this jack. (Be sure to use the supplied
AC power adaptor. Using products with a
different plug polarity or other
characteristics can cause a malfunction.)
Preparation
8GB
1Ear pad (left)
2Contact point
3Battery case
This battery case is for the rechargeable
nickel-metal hydride battery (supplied) or
commercially available (size AA) alkaline
batteries only.
4Self-adjusting band
The headphones automatically turn on
when you put them on.
5Ear pad (right)
VOL
TUNE/ IDSET
TUNE/ IDSET
6TUNE/ID SET button
(See pages 19 and 21 for details.)
Use this button when reception
deteriorates, or when using additional
headphones.
7VOL (Volume) control
Use to adjust the volume.
8POWER indicator
By pulling up the self-adjusting band, the
indicator lights blue when battery power
remains.
Headphone Part Descriptions
Preparation 9GB
Charging the Supplied Rechargeable
Nickel-metal Hydride battery
The supplied rechargeable nickel-metal hydride battery is not charged from the first
time you use it. Be sure to charge it before use.
To charge the headphones, place them on the transmitter.
Inserting the supplied rechargeable nickel-
metal hydride battery
1Open the battery compartment lid
of the left housing.
The battery compartment lid comes
off.
2Insert the supplied rechargeable nickel-
metal hydride battery into the battery
compartment, matching the 3terminal on
the battery to the 3mark in the
compartment.
Do not attempt to charge any other kind of
battery with this unit.
Note
The battery compartment has a tab on the #side which holds the battery in place. Insert the
#terminal first when installing the battery.
3Close the battery compartment lid.
1
2
Left housing
Preparation
10GB
Charging
1If your AC power adaptor is equipped with an on/off switch, set it to ON.
The power is supplied to the transmitter.
2Connect the supplied AC power adaptor to the transmitter.
Notes
•Be sure to use the supplied AC power adaptor. Using AC adaptors with different plug
polarity or other characteristics can cause product failure.
• Be sure to always use the supplied AC power adaptor. Even AC power adaptors having
the same voltage and plug polarity can damage this product due to the current capacity
or other factors.
•Connect the AC power adaptor to an easily accessible AC outlet. Should you notice an
abnormality in the AC power adaptor, disconnect it from the AC outlet immediately.
Unified polarity plug
On/off switch
To an AC outlet
AC power adaptor
(supplied)
To DC IN
9V jack
Transmitter
Andere Handbücher für MDR-RF5000K
1
Inhaltsverzeichnis
Sprachen:
Andere Sony Kopfhörer Handbücher
Sony
Sony MDR-EX38IP/BLK Bedienungsanleitung
Sony
Sony MDR-Q55SL Bedienungsanleitung
Sony
Sony Qualia 010 Bedienungsanleitung
Sony
Sony DIGITAL NOISE CANCELING HEADPHONES... Bedienungsanleitung
Sony
Sony MDR-RF4000K Bedienungsanleitung
Sony
Sony MDR-E828LP Bedienungsanleitung
Sony
Sony MDR-ZX110NC Bedienungsanleitung
Sony
Sony XBA-N1AP Bedienungsanleitung
Sony
Sony MDR-DS8000 - Core Headphone System Bedienungsanleitung
Sony
Sony Triqii MDR-PQ3/YLW Bedienungsanleitung
Sony
Sony MDR-XB400 Bedienungsanleitung
Sony
Sony MDR-EX510SL Bedienungsanleitung
Sony
Sony MDR-E10LP - Stereo Headphones Bedienungsanleitung
Sony
Sony MDR-EX35LP Bedienungsanleitung
Sony
Sony h.ear on 3 Wireless NC Referenzhandbuch
Sony
Sony MDR-G64SL Bedienungsanleitung
Sony
Sony XBA-2 Bedienungsanleitung
Sony
Sony Operating Instructions MDR-NE1 Bedienungsanleitung
Sony
Sony MDR EX85LP/BLK Bedienungsanleitung
Sony
Sony DR-EX12iP/BLK Bedienungsanleitung
